2023-2024 KTM Cylinder honing / Saving $950 by doing it!

RideLove Adventures
9 followers
Well if your cylinder looks like mine (after 17 hr ) then by doing what I did you can save $950 by not buying another cylinder for you KTM branded bike. Recommend after doing the honing measure the cylinder bore and order a piston from Wossner. They offer 71.94mm (stock bore) 71.95 and 96mm with those options you can set up your bike to be better than the stock was. /Test video with the first test ride coming up this week Friday, Check it out!/#ktm300tpi #ktm300xc #ktm #gasgasec300 #huskvarna #yamaha
Wow. That was really bad. This bike should can handle this. It's okay. If not, then we'll fix it.
Today we are doing something what I'm not supposed to do. What I mean by
on social media I got like over 4 million views on my post regarding to the cylinder damage what
I have and a lot of guys telling me I'm doing it wrong. I'm not supposed to doing what I'm
planning to do which is honing the cylinder because they said I'm gonna mess it up.
This thing is really special. I'm not gonna do a lot of passes. I'm just gonna do
a few passes from both way. Try to see if I can fix my cylinder. Hopefully I can.
I'm kind of excited to doing this. I never did this before. I mean
I don't do stuff like that normally. This is a 71 millimeter honing kit by the way from Amazon.
So I used W40 to clean it up and yeah it works good. So now it's time to start put it together.
I just like to put oil, two-stroke oil on the bearing and on the piston around it just to
you know be safe when I start up the bike and start running it. Everything is going smoothly.
Just check. Make sure everything is in place before you put it together. Seems like everything
is in the right place over here. As far as that ring goes. All we gotta do is just to
put the thing together. The moment of truth. There it is.
