How to draw a bird in flight

Art painting
22 followers
18 Video Views·Jan 16, 2026
Hi everyone and welcome to this drawing video.
In this video I'll be working on a couple of drawings of birds flying in different poses.
In terms of the equipment I'm using, I'm using a mechanical pencil with HB leads on smooth
Bristol board paper, along with a blending stick to help smooth the shading, and a small
eraser to help add highlights as I'm working.
But please don't worry too much about the equipment you're using, as long as you have
a pencil and paper in front of you, you'll be absolutely fine and you'll be able to create
something like this.
The first drawing that I wanted to work on is a side view of a bird mid-flight, and as
you can see I started off by sketching the beak and the rest of the bird's head, and
the eye is actually very close to the corner of the bird's mouth.
I proceeded to sketch the rest of the body of the bird in a very rough way, it doesn't
matter about the quality of the lines at this point, it's just about getting an accurate
idea of the proportions and just kind of figuring them out with some very light, rough sketches.
And this is also really important when you're working on the wings, it would be a bad idea
to work on the feathers first, before you've got the proportions of the wings drawn out.
So I like to work on the complete outline of the wings first, and then proceed to add
the feathers over the top of that afterwards.
So as you can see in this video, it took me a few attempts to get the rough outlines of
the wings first, before I started adding any sketching and any details over the top of
them.
And once I had placed those outlines, that's when I started adding all of the individual
outlines of the feathers.
Obviously, the wing in the foreground is the most prominent and detailed part of this drawing,
so I wanted to make sure I spent a bit of extra time making sure that all of the feathers
looked as correct as possible.
And once those outlines were completed, I then moved on to working on the shading.
I started off actually by shading the bird's head and body, just getting that part out
of the way first.
When it comes to adding a feather or a fur texture, I like to start off by adding some
quick fine strokes with the pencil, and then I use the blending stick over the top of that
to smooth the shading between those lines.
And then after that, I use the small eraser to add some lines of highlighting.
I usually go through the process a few times, where I add more pencil lines over the top
of that, use the blending stick to add some stripes of smoothing, and then I use the eraser
again.
It just kind of builds up this layered effect, and I find that this is actually a really
nice and an easier way of creating a simple feather or fur texture.
For the bird's beak, I added some very dark shading, along with some highlighted ridges
on the top.
And for the eye, I added some dark shading around the outside for the eyelid.
And for the eye itself, I added a ring of dark shading along with a nice big highlight.
I really love to add highlights to the eyes in drawings like this.
I feel like the eye is a very prominent feature, and it really helps to make these animals
stand out from the page.
Once I'd added the shading and the details to the bird's head, I then moved on to adding
the rest of the feathers to the bird's body, following the same process that I used for
the bird's head, but kind of elongating those feathers and using some longer strokes of
the pencil.
The same sort of process happened for the tail as well, but making sure those feathers
are much more defined, with some darker shading to the underside of them as well.
After that, it was time to work on the most prominent part of this drawing, and that was
the wing in the foreground.
So for this, I started off by working on the feathers on top of the wing.
These are much finer, and they require a bit of darker shading towards the top edge of
this wing.
I started by defining the shape of each little feather, and then I added an area of dark
shading on the left side of each one.
After that, I used the blending stick to smooth the shading over the top of all of them, and
then used a small eraser to add a highlight along the right edge of each feather.
Just defining the edges with highlights and shading, the shaded areas really helped to
show up that overlapped effect and showed that the feathers are all sitting on top of
each other.
I continued this process along this section of feathers, even having some of the little
feathers going off in different random directions, because they're the smaller, fluffier feathers
that are less uniform than the feathers further down the wing.
Once that section of feathers had been completed, it was then time to move on to the middle
section of feathers.
These feathers are a little bit larger.
The method of shading them is similar, but it's a little bit different because the difference
between the shaded and the highlighted areas is a bit more defined.
So for each feather, I was making sure to add a line going down the middle, with the
left side shaded and the right side highlighted.
And when I was adding the shading, I was making sure to add it in the direction of the texture
of the feather.
It's also a good idea to add some shading between the feathers.
This is a good way to add to the realism and to show that the feathers are overlapping.
Adding some dark shading towards the top of these feathers also really helps in showing
that the feathers on top are kind of overlapping them.
Another way of really helping this is to use the small eraser to add some lines of feathers
kind of going over the top of that dark shading, and just to help the illusion that the first
section of feathers is fully overlapping the second section.
And then it was time to add the shading to the last section of feathers on this wing.
These feathers are the longest and the largest, and I used a similar process that I did for
the second section of feathers, where I add the darker shading on the left side of each
feather and then have the highlighted section on the right side.
Making sure to add that shading in the direction of each feather's texture.
It also really helps at this point to have a sharpened pencil or a mechanical pencil
to really add those fine detailed lines, at the tip of these wings especially because
they are the closest part of the bird to the viewer, so you want those lines to be as defined
as possible.
Also remembering again to add the shading between each feather to show that they're
overlapping, and also adding that shading towards the top of these feathers to show
that the second layer of feathers is overlapping them.
And then for the final part of this drawing, I worked on the wing in the background.
This one doesn't need to be as defined, it doesn't need the sharp lines, because you
want it to look like it's in the background.
So I added some very basic shading, adding some extra shading along the left side of
each feather, and then using the blending stick to blend all of that, and to even blur
the edges, just to kind of fade this part of the drawing into the background.
There's a layer of really fine feathers towards the top of the wing, and I used the same process
that I used for the bird's head and body, for those feathers, and then used the blending
stick over the top of them, just to kind of smooth that and kind of blur it a bit.
After that, this drawing was completed.
I decided that I wanted to work on another drawing of a bird for this video.
This time I wanted the bird to be in more of a landing pose, with the wings in more
of an upright position, and it would have its feet poking out as well, ready to land.
So I started off by working on the basic sketch, getting the rough outlines of the beak and
the head and the eye, and then drawing the rest of the body in more of a vertical position.
I got the basic sketch of the outlines of the wings first as well, just to kind of get
an idea of where I wanted to place them, and kind of adjusted that as I needed to.
I also sketched the shape of the bird's little feet.
For each foot, they have three toes in front, and one toe at the back.
And lastly, for this sketching part, I defined the shape of each individual feather on each wing.
Moving on to the shading, I went through the same process of adding the feathers to the
bird's head and body, by using the quick fine strokes of the pencil first, and then using
the blending stick and the small eraser, and then continuing that process to build up the layers.
I added similar shading to the bird's beak, where I added the dark sections of shading
and left some ridges of highlights, especially on the top section of the beak.
And then for the eye, it was the same process again, of leaving that nice big highlight
to really show up the eye, and make that stand out as a prominent feature.
I added some longer feathers to the rest of the bird's body, and then continued them all
the way down to the tail.
At the tail, I added some shading to each feather, adding some darker shading on the
left side of each feather, and then having highlighted edges on the right side.
And actually, where I wanted to have the bird's body feathers overlapping the tail feathers,
I used the small eraser to use quick fine strokes and show up feathers in front of the
shading of the tail.
This is a really cool method, and it really helps when you want to add those highlighted
feathers over the top of the shaded area, just by using the small eraser.
It really helps with the depth of the drawing, and it really helps to make it look a bit
more 3D.
I added some darker shading to the bird's feet, also making sure to make use of the
shading to add some wrinkles to the skin, using the small eraser to add some highlights
along the left side of the toes, and added some darker shading to each claw.
Finally, it was time to work on the wings, and I started off by working on the wing in
the foreground.
I began by adding a dark outline along the top edge of each feather, and then I added
some smooth shading with the blending stick across all of them, but making sure to leave
some highlighted areas towards the tip of the wing.
After that, I added some dark shading towards the top of each feather, and defined that
with a sharp line.
For the layer of feathers towards the top of the wing, I used the same process that
I used for the rest of the bird's body, and then to show up that texture overlapping the
larger feathers of the wing, I used the small eraser to add quick fine strokes and add that
textured layer.
And then lastly, in a similar style that I used for the previous drawing, for the background
wing, I just added some very basic shading, and kind of blurred it into the background
with the blending stick.
And after that, this drawing was completed!
And so I've completed two different bird poses for this video, they were both really fun
to work on, and if you do follow this video along, or if you've worked on anything similar,
then feel free to show me your work on Twitter or Facebook or Instagram, I'd really love
to see.
I really, really hope this video helps out in some way, and be sure to let me know what
you think of these drawings in the comments below.
If you want to watch more videos like this, then make sure to subscribe, and any likes
or shares are hugely appreciated, it really means a lot to me.
If you want to follow along with my progress photos, and keep up to date with everything
I'm working on, then be sure to check out the links in the description box below to
check out my Twitter, Facebook and Instagram.
And once again, thank you so much for the support on this channel, I can't wait to work
on some more drawings, and I really hope this video helped out in some way.
Thanks for watching, and I'll see you all soon!
