STEAMBOW Survival-Schaftadapter (quick detach buttstock adapter), Einbau & Details ( #assembly)

Yes, what is it about? Quick Detach Buckstock Just that one To hook in I want to install that one Today disassemble, install Exactly, who is interested in it, stay tuned I'm not, it's short and crisp Next Step Project Survival Yes, again in advance If you have an M10 or an AR6 You can buy this module Survival Module It costs 50-60 Euro This is then, after the Abhill is removed Mounted up here This element And then you have the single shot variant Reasons for this I have already said Again very briefly It is the most precise variant Variant from the Stimo family Because with a magazine Bolts always have a little distance To the tensioned tension This is not the case here You can pull the bolt up to the stop And I have the possibility with 9-inch bolts So throw longer bolts This is in the precision of advantages Especially on longer distances Okay, these are from Strasbourg-Team.com That again very quickly Okay, so we want now Quick Detach Buttstock Just install that Well, what do we have to do for it? Reassemble the entire tensioning system I'll do it naked Good anti-counteraction Throw arm out Still hanging on the tunnel So, okay Scope anyway off Okay Yes, the system is of course only This here, this element I just have another one here Shoulder shaft on it I wanted to show you again This is also one of the Crossbow-Team.com It now has an adjustable cheek rest It is comparable to the M10 shoulder shaft Okay Yes, exactly, let's go I open now here Just pull the tensioning system backwards So I get well to the screws Here you can see it better To the screws of the side parts I open again, or I just loosen again The rear So, already out Other side So, and that's it So Now I have to loosen this screw here In the handle Which is also secured with a nut And then the shaft comes to me In the shaft system Oh, that was the wrong screw I idiot I have the screws from the handle I'm sorry I just have eight hours of small children behind me In my main job I'm not a kindergartner I'm a teacher If that interests you I work with children In the age of 3 to 12 3 to 13 Yes, with whom school All school subjects and so Anyway, let's go Okay So I just push it through here So, and that's it Yes So again, last time I already mentioned it The system is of course Only This part, folding shaft adapter There's just a tube on it The shoulder shaft Exactly, and here this ring That is crucial Yes, now I would normally Pull off the shoulder shaft And put the tube on it I don't do that now I have a tube here I have another shoulder shaft here Yes And this I can almost just put it in The only thing I have to do I just have to take that screw Which I pulled out down here Knock in again and counter-nut Because There the shaft So This element is simply hooked in Okay Not quite straight So Yes, right Good Here you can see it again Yes, okay Yes So You buy this element Just screw it on the tube And then Done Apart Together Okay, we need One thing I wanted to mention Before I forget If you Yes Normally Remove tension system Save it and don't lose this nut I don't need it here But if you remove all of this Save the nut Okay Yes We are now missing The tension rod There is now only the method Classic tensioning That is really classic With a footrest Or against the Kneepads It depends on the strength of the arm And on your own power I can also do it with a 150 160 against the chest Except at 5 o'clock in the morning And I haven't had a coffee yet Let's build it up I still have the 90 in here There are a lot of them Good And because I want to show it with the foot We build the footrest I put the footrest on I put it against the front Now comes my fat ugly Screwdriver I wanted to put a smaller one in I don't do that today Because we Put the footrest on And then it's already simple I also found the hole He sits UTG handle on it As I said I don't want to use it like that anymore As a weight complaint In the next video We'll talk about it Whether that makes sense Or whether there is another handle For me personally Okay, scope on it again That's all about optics Okay So again the note Please install the scope properly Yes Okay, that's exciting Exciting Let's get to it So here again Very clearly From the side the system explains You go in here Of course it doesn't work without resistance With the hand And hooks Behind here So And one more thing we have to do The screws In front On the side panels Fasten One Hook My band Yes I put on my gloves I think I told you before I have a stupid injury on my thumb On the other hand If you use broadheads Hunting balls, warballs That's also a good thing If you pull them out of the target It can easily happen that you squeak And get injured In this case it has another advantage, you can grip the scene a bit more comfortable. I do the following now, I just put it against the chest. I grab here, as I said, I can show it again with the other throwing arm. That's it, 90 front. I put it in. So, there I have a target. The target is now only a function. 9 inch bolt. And here you can see that the cam of the bolt is marked at the back. Okay, safety. So, change of perspective. I want to show the classic method. I have now also made a stronger throwing arm. The heaviest and strongest, 115 from Steamboat. Okay, once against the body. Here against. 150 front. Now I have a heavy bodkin from Steamboat. And then again the method that you know from the full-size arm armor.