KTM TPI and TBI How to easily adjust TPS Sensor

RideLove Adventures
9 followers
Jan 9, 2026
Purchased a new 2024 KTM and come with a few issues which was an Engine Backfire and no start after that, Also the Bike was low on torque. Adjusting the TPS seems to fixed all of my problems
Hey there, early morning. I decided to adjust the TPS myself
since I have unusual condition like engine backfires.
I gotta, I gotta fix it because the dealer is quite far away from me so I just tried to adjust
the TPS on my own and to do that I'm gonna using a paper clip and not even poking a hole because
this is like a silicone type of thing over here. I just squeeze this in, one goes to the yellow
and one goes to the black. I just put this in, boom, like so. Let's put it back,
nice. Hook the mirror up to it, the mirror has to be at the DC low voltage, like so,
very good. We're gonna hook the red to the bottom which is the black, we're gonna hook the black to
the blue and then we're gonna check it if everything is good. You should see a voltage
which is we didn't, probably gonna push this in a little bit more, there it is, okay 622.
So we're gonna give this thing a little bit more fuel, I'm losing the TPS bolts up, you have the
white mark, that's what you want to start with, I mean you have 622, that's our basic settings,
so we're just gonna go up to 7, move it a little bit forward, I mean a little bit up,
675, let's see, 773. Let's take it to the spin. I just got back riding the bike on the street,
back and forth a little bit, but I can tell you it makes a huge difference. In my previous video
I was complaining about this bike doesn't have enough power down below, that's gone,
that's not true anymore, this bike has a ton of power down below, as soon as you adjust the TPS
it makes a huge difference, literally on the bottom, it's just on the bottom end,
now we have a ton of power. That's definitely fixed it, now I have no backfiring and I have
a perfect running engine.
