My Thoughts about how the Xtrig and the 720SBC bar clamp works together

Adventure Ride Experience
9 followers
Jan 8, 2026
Installed and tested Xtrig triple clamp and a 720 SBC bar clamp on a 2024 KTM 300XC. Wasn't the easies install had to deal with the Florida heat and the fact os my first time doing it 😂
So today we're gonna change out the 2024 stock KTM 300 XC triple clamp and we're gonna put the
X-Rig on it with 720 SPC softbar clamps. Also we're gonna install a ProTaper steering damper
low band bar which is kept the stock high if you guys like that like I do. So you can have
the handlebar installed and with a clamp you can keep the stock high on your bike. Let's get to it.
So I already took the the stock clamp setup off from the bike and I used the 720 SPC 17 millimeter
M8. That's just too slow. I don't like to be that slow.
Much more like it. Okay so this is the stock triple clamp setup. Weighs 3 pound 14 ounces.
This one 3 pound 14.5 so we actually lost a little bit instead of gaining
but it's not noticeable. Let's see if the quick way will work.
Needs to go down a little bit more.
Perfecto.
All right let's try to wrap this up. It's getting hot over here.
Hopefully everything works the same way on this triple clamp
like it was on the old one. Looks like it.
Here's a quick start. 17 on the bottom 21 newton meter on the top. I just finished
tightening down on the bottom. Now I'm just gonna tighten the top down on both sides
and then we are ready to install the clamp after that. The stock KTM takes much less torque than
this one. This is 17 and the stock like 12 something. There we go and this 21 is kind of crazy.
All right the final item before we can ride it. Spacer goes right in. You can adjust it.
Two holes kind of the way you want it. Go like this slide in boom like so bolts in there with
the washer. I think now I have a lot of options. Before I did not. I think I try to do it like
away from me a little bit more. This is something where you need to play with to set it up.
Because you can have it like this. You can have it one back like you can have it
like this. It's a little bit closer. That's I think that's the stock position. I think that's
perfect. Washer nut.
That's about 14 15 newton meter. What the heck. Oh my god. The travel cable in the wrong place.
It's supposed to be on this side so I don't feel like to take the fork out. So I rather taking
this apart and just squeeze it between the fork and the fan. That's the plan.
Try to do the whole thing at once but it just won't fit.
I guess I have to take this apart. Yeah I don't have to. It just came apart.
All right I guess I just saved the day. I like to keep this rubber
cut over here close to the rider like so. Normally I set it up mine like that.
Oh my god. Everything is on the way.
That's one of these riders. It wasn't in the right place.
We don't, we don't, we're not tightening this up. Just
keep it a little bit. So it's easier to put the inner clamp in like that. Make sure the rubber
flushed with the outside. Yeah let's do the other side over here. At least I can see what I'm doing
over here. It's not easy to doing this camera thing and getting something done.
Especially when you don't see what you're doing.
Good.
These are just, these I need to get loose as well. That's not a new set clamp. I already
beating the crap out of it. That's fine. It looks like that. I've been testing this for a while now.
This is too much. I mean it's pretty much there. All right so I'm going to tie the other camera down first.
First day on my track testing the clamps. Both the X-Rig and the 720.
I pretty much moved the 720 a little bit away from me. So I'm pretty sure that's what
that would help me in the time turn technical sections. I don't know how good it would be on
the speeding trails. But we're gonna find out today. After I finished cleaning myself. It's
really hot over here in Florida. Sweaty, hot, human. But I do my best to to show you guys
both circumstances how the X-Rig and the clamp handles.
The trail is tough.
So it's definitely
very easy to maneuver.
I can kind of go faster with it and feel safer by hitting the
the right area with the turn. So my tire is not flipping. If I don't hit the right spot
then I pretty much fall. That happens a number of times over here.
So if I do this.
It's very hard.
Let's try it on the technical section.
I don't know. The clamp on the bike. You may ask which clamp I'm talking about. Both.
I just put it this way.
All this together.
Wow.
I'm pretty much all over the place.
Here, put it in front. And have the front where I... without no issues.
The whole setup is very lovely. I don't know the level of you need to be on riding to really feel
the difference on the X-Rig but it definitely makes a difference for sure. Yeah, no questions.
It does for everybody. Yeah, whoever can afford it. I mean it's really the question of you can
afford it or not. If you do, then might as well buy it. It gives you a lot of options. Not just
have your suspension moving freely, moving softer, but also you can adjust the triple clamp.
None of the stock triple clamps from KTM, Husqvarna, and Gas Gas allows you to do that anymore.
The only thing you can do is just to flip the clamp, the triple clamp. No, flip the handlebar
and it gives you like a quarter inch back and forth. If you can see... I'll try to line it up.
Let's just do it like this. The handlebar right now is in line with the shocks. The way it was
before was kind of like half an inch or so back. It was really good when I was riding fast,
but when I do these technical trails I want to have my weight over here in line with the foot
pegs. So that way I can achieve the turns in fast motion with no issues. In order to do that I need
to sit up high up front and then my cockpit, the room, it becomes very little if I have
my handlebar move towards me. So now with the triple clamp I'll be able to move it away.
That way I gain enough room to confidently sit on the bike and I don't constantly move my weight
back a little bit because it's just too tight. I'll actually be able to sit straight and just
conquer all these turns. So it's a good stuff for sure. If you can afford it, definitely
worth it to have it. So that's pretty much it. Good looking stuff. I also put the bar pad cover
on this. I think it looks more factory, I would say, like more the bike should look. So I just
put the bar pad on it. I didn't have it on before but I put it on. I like it. We have multiple
different colors available on this. But anyway, that's a wrap up because I'm sweating and I need
a drink. You guessed it what kind of drink, but enjoy the video. See you guys!
