Carving On Pottery - New Diamond Core Tools

Ceramic Art Studio
35 followers
Jan 7, 2026
AI Generated·May contain errors
Hey everybody, welcome back to Matthew Kelley Pottery on YouTube. I hope you are doing well
today. I'm sure you noticed that if you've been here a while there's a little bit different intro
today and that's because we're going to talk about some new tools that I have. We won't talk about
every tool that I just got that I unboxed in that video but we're going to talk about some of the
carving tools. They are from Diamond Core Tools. You guys are probably pretty familiar
with their products already and if you're not you definitely should check them out and I'll
put a link in the description of this video. They're not necessarily an official sponsor
of today's video so I don't like have a coupon code or anything like that for you so I apologize.
I don't have that but I did reach out to them and see if they would be willing to share some of
their tools with me. They did give me a few tools and then I bought some on my own as well so
there's a mixture there of tools that they did give me because I told them I wanted to highlight
them on my Instagram and my YouTube channel and so we did work out a little bit of a partnership
there but there's no official sponsorship happening here. If you do follow me on Instagram
you probably have seen me already use these tools because I did a couple carving videos already
and I don't have any of those pots finished to show you yet but I've gotten comfortable enough
that I thought okay now's a good time to actually make a video and
show some of the carving at least the way that I'm using them currently and I'm sure that will
evolve over time as I get used to them and get better at using them. Also if you
follow me on Instagram you probably have seen a short video at the beginning of this week or end of last
week where I threw these couple platter bowls that I have here and these couple bottles. I threw
these actually yesterday so this is future me talking about past me but I threw these
yesterday in preparation for a recording video today and so I'm actually going to cover these
with slip either the whole piece or just part of the piece and then let that stiffen up or dry it
with a torch and then carve through that and all these are going to be for my next
wood firing so anyway I am going to cut to a video here I made a time lapse of throwing these
just for the sake of the time of this video or the or the length of this video I should say
I did a time lapse of throwing these pieces and I'll add that in here and then when we get back
from that we'll start doing the slip work and then the carving so here's a like I said a short
clip of me throwing these four pieces and then we'll be back in just a minute.
All right we have the slip work done on all them as you just saw I decided to just do a
a silent or sped up version of that to make it a little bit quicker as well now I'm going to get
into actually carving some of these or carving all these I should say one of my favorite tools
so far that I've used is this curved one and I'm not sure like if I if I like it because it's the
shorter palm carver or just the the tip but I think I think I really like that curved tip on
this one actually I like all of them for different reasons but this one I'm going to do kind of like
a kind of like a vine with with leaves I'm actually not going to draw the I'm actually
not going to carve the center line first I'm going to draw a center line kind of in the middle of
this rim and then I'm going to go on the top side of it all the way around and then I'm actually
going to go on the bottom side of it all the way around and kind of make like leaves I'm not
necessarily going to try to line them up with each other I'm just going to carve both sides of that
center line and so first what I'm going to do is just spin this and draw a little bit of a pencil
line in the middle if I can it may not show up amazingly but it'll be enough to get a give me
an idea of the center line and then some of the carvings that fall down in the middle I'm just
going to leave because right now it's still a little bit damp down in the center but the rims
stiffened up so I don't want to wait any longer on this one but if the trimmings get down in there
I'm just going to leave them and as it dries those will free themselves from the from the clay down
there and just brush out so that line is not quite in the center don't really like that that I drew it
a little bit more towards the edge than the inside but but I'll adjust as I'm carving so
first what I figured out with this one to get the design that I like is actually to come
on my far side and I'm actually going to carve kind of like straight down and then kind of swoop
to my right and so that's going to give me that little should give me a rounded edge where I start
and then as I swoop to the right it kind of and I curve the the tool a little bit and that gives me
a little bit of a pointed end to it I haven't perfected that but that's kind of the look that
I was going for and I've watched a few of the videos of other people carving with this tool
and and that's what I found out so I'm going to start doing that and and try to work over here
where hopefully you can see as I'm doing this the good thing about this one also it is it has the
car the curved tip so that's actually the part that you that you carve with and that helps the
rest of the tool stay out of the way as you're carving so like I said I'm just going to carve
straight down and then curve towards that line just like that and I get that nice bulbous part
with a with a kind of a tail on it and I'm not going to worry about it being too perfect but
just going to carve and get all the way around and then we'll switch to the other underside
all right there we go we got all of the all of the top side carved and then in order to do
the bottom side I'm actually going to have to come on this side closest to me and then I'm
going to pull towards me and then curve to my left in order to do the same curve but on the
bottom side because I can't really it's a lot easier for me to do that pulling towards me than
it would be to push and still go to the right so I'm going to pull towards me and go to the left
and then go all the way around on the bottom side and we'll see what it looks like looks pretty good
but this bottom side will really complete that look to it and here we go and there we go we got
inside and outside carved and I do have to say that I think that looks pretty cool
very happy with that and like I said all those shavings that are bottom I'm just going to leave
those because it's damp down in there and if I try to get those out now it will it will definitely
mess up the inside and I'll come back later as well as this dries and I'll just clean up
with a little tool around the edge to get any little burrs off and or I could wait until that's
bis fired and then just sand those off that would be a possibility as well but for now that one is
done and let's go on to carving the next one but that one looks pretty sweet all right I'm going
to do a similar pattern with this one as that last one except I want to maybe have have the line that
which that that that vine kind of will follow to maybe to maybe go down where each of these
crimps are in the rim and then maybe come up in between those crimps to a high point and so maybe
have have it kind of so it curves and if I draw through this a little bit it's not going to bother
me because I'm getting ready to carve it anyways but just have that line be a swooping line that
goes from kind of goes high and low and then if it goes along with those crimps it'd be kind of
cool going to be over here I found a pencil is this one's a little bit more wet than it would
need to be to actually draw on with a pencil very effectively but that'll still give me a general
idea and the other thing I know about this slip is depending on if I glaze over it or not if I
glaze over this it will give me a different effect and it will actually melt because of the
iron and the manganese that is in this slip it allows it to to melt some in the firing so I'm
not too worried about getting that line perfect but then again too it may find out different when
I'm done that I'm like man I wish I would have done waited for it to dry a little more and made
it a little more you know of a perfect line but you know this is going to be somewhat of a vine
so I'm not worried about it necessarily being I like to have those nice curves but the organicness
of it is still going to be fine so now I'm going to do basically the same thing I'm going to come
on the top part of the line here and I'm going to carve down and go to my right and I'm going to go
all the way and try to follow that curved line all the way around and then come back on the on
the bottom side and do that as well and so yeah we'll see how this turns out that'll finish that
one up and we'll move on to the bottles all right so here are the different tips that I've got of
carving tools from Diamond Core I've got the the curved or the or the curved u-tip so the curved
means that this part and then the u-tip is the shape I've got two curved v-tips which they are
curved and then they have the they go to a point so they go to a v per se and then this is the
curved square tip so you can see it still has the curve this way but then it has a square tip
and I'm learning all different ways that I can use all of these and so I'm just going to play
around a little bit more I think I'm going to start with the the smaller curved v-tip and I'm
actually going to do some lines that are curved and then I'm probably going to add some like little
leaves to that and then I think on the on the point of that I might even try to do a little
bit of a bulbous point with the curved u-tip and then I'm actually going to add some white slip
dots kind of like the top of the plant or the flower not trying to get realistic but just trying
to get play around with some different designs and I think I'm just going to do that on this
top portion of the the shoulder of this of this jug and then maybe or this bottle and then we'll
play around with a little bit something different on the next one but yeah so we're going to try
that out and the the the hard thing about carving and with slip is that if you mess up it's not like
if I'm normally doing slip work like with a bottle if I don't like what I did I can just
wipe it off and try it again if you're carving into the clay that's it's a little bit different
ball game because if I mess up or I don't like the line I make I just kind of have to work with it
so that is definitely the trickier part working with carving a pot versus just adding slip work
and slip decoration like I'm used to but I'm going to start out with just some some curved lines with
this with this curved v-tip and then we'll come back and enhance those so hopefully you can see
what I'm doing here but this one this one is really really nice because any of these and
including slip work any of these you can go back and and adjust lines if you need to but one of
the hardest things is that if you ever trying to do slow motions like I did right there you end up
having a a tougher time than just having a quick confident stroke to any of your your markings
I've always noticed that that is that is a better way to do any slip work and and with the carvings
is to have kind of a quick confident stroke and that usually helps with the with the design by
doing that so I'm gonna do a few of these here maybe do three on this one as well as and then
I've got two on that one maybe we'll add a third one to this one as well maybe a shorter one that
comes down lower there we go all right and now I'm going to take the the curved u-tip and I think
I'm going to try to add a bulbous part to the top of these and so I'm going to come back to the top
right where I made the same line and then just add a bulbous tip to these I've never actually
done this before so this is kind of experimental but it looks like it's working nothing like
experimenting live on on recorded video I don't that's live but if I mess up I gotta trash this
pot and then start over and I've messed up my video in that case but it looks like it's working
so that's good now this doesn't have the point the uh the the the line inside there doesn't uh
inside my my u-tip one doesn't have the uh the sharp line in there but I think I'm okay with
that and then what I'm going to do is I'm going to come down towards the bottom and I'm going to
make some uh make some leaf looking things down here at the at the base of each of them I should
have done that uh more like that I think I should um just do one side and then flip it around to do
the other yeah see and I kind of covered up my mistake there by doing that let's see we'll just
do a small one there we'll do this one there we go and then right there longer ones there we go
so that definitely is uh cool I like that a lot and now we're going to do is I'm going to come to
the top of each of those and get my white slip the look the one thing I love about my white slip here
is it actually stays 3d uh if I ever do slip work uh lines or dots with this red or the uh this is
what I call my dark red slip the other one's my black slip those because of the iron content in
them uh if when they get hot enough they actually melt and and don't stay 3d this white slip will
stay 3d so one of the things that I love to use this for is doing my dots which if any of you've
been following my work at all you know that I love dots and so what I was thinking about doing
is just adding dots like this to the tip of each of these little and then they will
stay 3d on the finished piece and no matter how I glaze over this or if I just leave it raw
either way we'll have uh
we'll have those white slips white slip dots staying 3d
there we go man I am I'm actually super thrilled with that and uh I'm glad that worked out so well
especially seeing it's on video so there's that one there's a little bit of a negative space right
there but I'm okay with that it doesn't have to be completely covered um but actually no I am
actually going to put a uh just a little singular one right there maybe give them a oh here I'm
going into uh Bob Ross mode give my little friend right next to him don't want to leave him alone
um he'll get lonely
all right and now do my uh there we go there's those and then a little bit more white slip
and there we go all right fill it in that little bit of negative space there
but uh either way I've been okay with it but uh yeah I think that one's really cool
and we'll move on to the next one all right I was actually going to do a different design
on this one than the other one but I love that design so much and it went so well that I think
I'm actually going to just go ahead and do that same design on this one and then in the future
I will share um maybe once I work out another design that I like I'll share another design
on a future bottle but uh but that last design went so well that uh and I'm like man that looks
really cool that I want to try I want to have one in the red slip and one in the black slip
with the same uh same pretty with pretty much the same design is what I'm trying to say
so I'm going to go ahead and carve um with the uh the curved v-tip uh do my straight lines
make them bulbous at the top do the leaves at the at the base and then do my white slip dots at the
top and then we'll come back and wrap up the video all right well there we go we got all four of
these pieces carved and I'm very happy with all of them uh which is super exciting especially
seeing I did them all live on video or on uh like I said with the carving you can't just like wipe
it off and try again and especially this design on the two bottles uh that was kind of like a
spur-of-the-moment idea and I was like oh that might work and uh and it did so I'm very happy
with those excited to see how all these turn out in the wood kiln and I'll definitely be sure to
share pictures of these with you all so you know how they turn out once they come out of the kiln
uh but uh as always thank you all for your support on youtube channel uh all the likes all the
comments all the shares uh those things are what help out my youtube channel help it grow and uh
help me uh help it be profitable so I continue to make them I'm motivated even more to make them
that way uh but uh anyway like I said thank you guys as always for your support on all my social
media and everywhere that you find me and uh yeah all those links are in the description if you're
interested in any of those and uh I'll be firing my wood kiln again here in probably another month
or month and a half and excited about that and we'll keep the videos rolling I appreciate all
your support and we'll see you in the next video oh by the way you guys probably noticed I have
my Matthew Kelly Pottery shirt on and I will have some of these for sale eventually uh if you're
interested maybe just send me a message uh private message or a comment on this video
and then maybe we'll work something I don't know exactly how we're going to do that yet but
I will have shirts eventually for sale and these are really cool because this is uh
this is actually it's not laser jet printed but it is similar in the sense that it's not
it's not vinyl so it's actually in the fabric and so uh it's guaranteed never to fade or crack
and uh definitely love that and uh anyway yeah so side note rabbit trail anyway thank you guys
always and we'll see you in the next video you guys have a great day bye
