Handyman Tool Bag Tour 2026 (SP-MC)

Gadgets Tools
5 followers
This is my 90% bag that I take with me to most projects. The goal is to pack as much utility into the bag as possible without toting around an entire tool chest. Affiliate links are listed below if you are interested in any of the tools. Please leave any suggestions or feedback in the comments. Thanks for watching!
#machine #tools #Powertools
Welcome to P10 and Happy New Year! I'm going to make it an annual tradition to review this bag
or my primary bag once a year since there's been a lot of support for that video. Thank you to
everybody whose comments and suggestions have helped me refine this to be a better bag than it
was in the one from last year. Straight into the bag, I'm still rocking the Vito Pro Pack SPMC.
It is an excellent bag, it works great for my purposes. A little on the heavy side, some people
have criticized that. I'm looking at options for splitting it out but I still like this as my
go-to 90% this is what I need kind of bag. As far as power tools, right now I've got the M12 from
Milwaukee, the drill in here. Sometimes I've got the surge in there instead, it just depends on
the project that I'm taking on. But I like to have one or the other in here depending on what I've
got going on and it's a great tool. I like this line of tools quite a bit.
Next, I've got my tape measure. I did switch this out from the previous one, 16 feet I found
is the right size for what I need. I don't need 25 feet or more in most situations. This one
is a stouter blade. Somebody called out in my previous video that I should look at a metric
one so I might do that. If you've got any ideas for where I could find a tape measure
then feel free to drop that below. But the standout is great, the markings are clear,
it's double-sided. I like the finger option or the lock that you can engage and this
clip is superior to the one in the previous model that I had. I don't use every single
pocket in here so this I haven't figured out a purpose for. So again if you've got ideas
feel free to let me know. I'm moving around to the other pocket pouch and these are removable
if you haven't seen these before and you can pull them out and stick it in your pocket.
I'll go through the items in this side. So this is the stud buddy and it's great for finding
metal fasteners in like a screw in drywall to determine where your ends are. I had this
previously in the bag up in this area but I found that it just liked to stick to things and
it was just a minor annoyance but those small things really add up over time. So I keep it here
it's the d-ring is magnetic or is attracted to the magnet so I don't have to worry about this
falling off and it's readily accessible. I can throw on a screw or something if I
need that here as well with this protective coating so that's another option that I like.
I am rocking the Milwaukee Fastback this is an excellent knife the locking snap action is great
this one has on-board storage for additional blades. I don't like the one with the driver on
it because I have a better driver in here and I don't like the execution on that one so this is
the one that I keep on here and it's great. Got a little Olight pen pencil this is compact for
whenever I need it. I don't need it a whole lot but it's nice to just have something on hand
for those occasions when I do need something or need to jot something down and I'm not doing it
digitally. This is my new go-to ratcheting screwdriver from Vera it's excellent I've
done a video on it and this can come out and be used in a drill it's not impact rated.
Got a locking spinning option for if you want to hold it in your hand you've got different lengths
and also on-board bit storage that you can customize to be whatever you want. I've left
this as the default but it can lock so that it does not ratchet in either direction or ratchet
one way or the other you can spin it with your hands. I really like this it's pricey it's the
most expensive screwdriver I've gotten but honestly for me it's worth it to have the
features and functionality there. This is a new addition this year I really like this style of
pliers the narrow head for grabbing things sometimes if I'm you know just those small
things that you need to pinch and rotate it also has the gap here to hold on to a nail if I need
to set that and want to keep my fingers out of the way some cutters on there. I haven't seen
this in a lot of bags but I like to keep this in mine. I switched out my Knypex wire strippers for
forged ones for these from Klein the reason for that I like the Knypex they're great the way
that these open and have easier access to load things in the cutters the sizes the the fact that
these are a little bit slimmer and fit in there and these are half the price of the Knypex ones
mean these are what I'm testing and recommending and will link in the description below if anybody's
interested in picking them up. Continuing the I've got a Vessel electric screwdriver this is USB-C
chargeable and just saves so much time if you're doing like taking screws on or adding putting
them on for an electrical plate or other applications this just it saves time so
consistently that I it's hard to think about all the time that I wasted just manually screwing
things in when this will do it this also only has limited torque so you're not going to overset
screws in most situations it also means that you may have to hand twist the final few rotations
depending on what your application is but I've got a Vera spinning locking bit holder in there and
just a P2, a Philips 2 bit. Moving on I've got my Fluke voltage pen or voltage detector
a an aux marking pencil I've had Pica before or Pico no Pica is right but what I like about
the aux is the sharpener is right in there whereas with the Pica it's you have to like
go in from the bottom to sharpen it so this is just a little bit better designed for when I
do need to sharpen it they're both great but I like the aux a little bit better.
I've also got the Milwaukee short ratchet here that came with some small bits this has come in
clutch a couple of areas or a couple in a couple of situations and I recommend it Klein's got one
that does not have the locking piece that is better as kind of a fidget spinner but I like
the fact that I can clip this on and take it off easily. Moving around the back I have switched I
used to have a couple of these railers I basically you know had 80 plus bits and was kind of maxing
out what I could fit on here and I found that I didn't need most of them and I was trying to
manage the weight of the bag a little bit better so on here I've got the types of bits that I use
most often so that would include these hex ball-headed ones these are from Railer and I like
them a lot if I'm doing flat pack furniture assembly or other applications I guess Ikea
is flat pack but I do a fair bit of that and these come in handy some more than others you can tell
from the wear and on this side I've got my Philips Roberts and some Torx bits in there as well over
on this carabiner I've got some nut drivers as well as this is a new thing I just thought I would
try out I saw this on last best tool but it's a mini stepped bit so we'll see if that comes in
handy but I'm trying that out I've got my Klein flip socket set this is the metric ones I've
tried the to do both I find that I use metric more and I do have a set of sockets for the imperial
if I need that but this gives me an impact option with an extension which is handy if I'm going with
the surge instead of my drill and then I've got a couple of o-lights on here one is the pro one is
the ultra these are both great I love this style of light and I've got a headband that I'll show
you in the front that either one of these work with so that I don't have to clip it onto myself
or hang it from something which are great options but sometimes you want it on your head and these
work really really well for that this one has uv this one has a red light in case you're wondering
about the difference I mostly use the spotlight in these are the flood light rather not spotlight
going into our back pocket I've got a few things back here some zip ties in this one I have
saw blades that go along with this
tooler holder that can hold different size blades I used a
hacksaw blade in this the other day to cut down a bolt that I had limited access to and just didn't
have my power tools with my my rotary tool to do it faster and it was just easier to grab this so
this comes in handy for cutting applications go ahead and just take things out and set it down
I've also got this is a change and upgrade from what I had before but every once in a while if
you need to do a perfectly straight drill or drill a perfectly 90 hole to wherever you're going this
is just a metal more compact option compared to what I had before which was still good but this
has been handy and it also if you're doing something in conduit it's got the channel in
there so that you can set it over whatever is round and drill your hole it works best if you've
got clamps for that I don't keep those in the bag but just a heads up if that's something that
you've got an application for a rasp and file love that this is compact if I need to take off
some extra material I've used this several times since the last video it definitely will stay in
the bag this is a change from my previous video just a small cat's paw nail tool to take things
out I'm not sure if this is going to stay in here long term but I've just had enough applications
where I needed to get out a nail either my own or most often somebody else's that was there before
and this is nice to have I've of course got more and bigger ones in other areas but it's nice to
have one on hand this is a Dasco pro pry bar and it's seen a bit of use it's got some if you need
to get into a small area and pry on something which happens more often than I would have guessed
when I first got started this is a good option the paint is wearing where it's been under shingles
and in other areas but that's to be expected okay so that's all of the front pockets and or all of
the outside pockets except the front pocket so we'll get to that one next and here is where I
have the headband that goes in with the low light so I can clip this in put it on my head
and angle that if I want to and I've got light on the go and I find that to be tremendously useful
so these are like 10 bucks or something maybe you can get a cheaper one somewhere else but
I didn't mind paying that for being able to wear this around everywhere I need it
in here I've still got the sockets from Makita these are a great set I've got metric and
imperial as well because sometimes the flip sockets are not deep enough and just having
that extra depth has allowed me to get things done that I wouldn't have otherwise or would
have needed to bring another bag so these have stayed in they fit well and have earned their spot
garbage disposal wrench if you're working with a disposal I highly recommend those
my quarter inch vim tools socket this is great it's come in clutch I think I may have broken
a tooth because it's quarter inch and can only take so much force but it's still been really
solid if I'm doing like a garage rack mounting that to the ceiling this does the job
got a sharpie and a hinge pin tool with a brass head so if I need to set a hinge pin back in or
remove it this works really well you can also do some marking this is not meant to be a nail set
per se but you can use it that way as well okay moving up into the main part of the bag we've got
some silver gripper pliers you need to grab something that's very small precision work
this can be helpful or get a little bit extra reach I like those I just added them with a little
ring here to keep them handy in this bag if you're not familiar this pocket here can be
accessed either from the outside or from the inside and in there I keep a few built bits
I like these they can go in either an impact or a drill but it gives me options for drilling
this is another railer bit rail I did clip off the piece that the carabiner would go into
just because it fits better in the space with that but these are definitely
well used and well up tools I switched to just having a single step bit this was one
I had some harbor freight ones some cheap warrior ones this was recommended on a project farm video
it's been good so far and I don't feel like I need more than the one in my everyday carry bag
my primary bag I guess I'm not carrying it everywhere I go and this is a bit that can
a recent pickup I think this was yeah this was actually a Christmas gift and it can
give you a little bit of an angle to work with so if you're doing like a ceiling fan install
and you've got a bit or a fastener that's close to the ceiling and you don't want to you can't
your drill in there or you know it's just tough this gives you enough flexibility to get in there
I've used it once since Christmas and it's been great okay moving forward in the bag I do have one
electrical or insulated screwdriver this I recently picked up I've been doing a little
bit more electrical work and so just to have the safety of something insulated I saw this as a
recommendation I love how compact it is haven't used it enough to have strong recommendations but
the idea and the size and the feel of it is really good got my miles craft marker here this is great
for marking reveals having some type of measuring and a level a couple of levels on hand or if you
I have these Fiskars shears they are great I did find one application that took them out I had cut
up previously a harbor freight magnetic bowl and they'd survived it so I felt like these were
indestructible but then I was actually trying to cut through a dryer vent and you've got the wire
that goes through the flexible hose for a dryer vent and that marked up these teeth pretty bad so
this is a second set that I picked up and be careful not to cut wire with these if you're
going to try and push the limits but for other things they do a great job here I've got my painter
scraper tool use this to I mean all kinds of scraping applications but took off the wax ring
from a toilet that needed to be replaced the other day and this gets the job done and it can fold it's
I like this one this is new just having a scratch all in there just to mark things or if I need to
put a hole in something this gives me some options I did actually ruin one scratch all you got to be
careful with the tip you don't want to jam it in things and then try and pry with it it's not a
pry bar it's to scratch not to pry but this has been good for a couple of applications I have a
screwdriver in here before I wasn't sure if I was going to keep it but then I've had a couple of
smart doorbell installations where having a the security bits that this comes with on board has
really been handy so this is going to stay in the bag for those situations I've got my hammer in
here some people have said this should live in another bag but I like to have this I found it's
useful enough that I'm going to keep it here it's the largest size that can fit in here I like this
style it stays of course I've got some connipex stuff the pliers wrench these are excellent I've
chosen these over a an adjustable wrench just I found that they meet my needs and they're fast
and easy to use and the fact that you can get on the fastener and loosen it to get around it and
crank it down just helps it work more efficiently so I'm a big fan of those
and to go with that of course some connipex cobras these are great water pump pliers the grip they're
in all kinds of videos and all kinds of recommendations they're not the cheapest
things out there there are others that are knockoffs maybe they're good but I've had the
connipex and I expect that I will have these all my life so I don't mind investing in a pair of
these they do go on sale every once in a while so check that out and for these and anything else
you don't necessarily have to buy everything full price all right so just a couple of hacksaw blades
uh this is again the one that I used the other day to cut off the bolts so they don't fit in
other areas so I keep them in the side pocket I've got the basically a chisel knife here from
this is a Swedish company they make great stuff this has worked well I've thought about changing
out to a different chisel just to try something out but I haven't really had the need so if you've
got any recommendations there feel free to let me know but this one has it's not very expensive it
is very very solid they make quality knives I've got a few of their other ones as well
and then I have not changed out the handles on these even though I don't
love the gummy feeling of them I got some heat shrink and I realized I just got one in the right
size and I have not gone through to fix it these are the icon snap-on knockoffs of their talon
grip ones but having the extra reach that these provide to get in deep into areas has come in
clutch on a few occasions so I like these these are definitely staying in the bag and then the
last thing in here is just a plastic scraper I've got a charger for my my lights and some extra
blades for the plastic scraper but this has come in use a lot of times anytime I need to scrape
something off and I don't want to mark the surface with a razor blade or you know this this just has
been very useful but make sure you keep a few extra blades on hand so that's it that's my primary bag
I have a secondary bag where if I need to grab additional power tools or anything I will bring
that along for the ride but for pretty much any job I do I bring this along so that I've got my
needs pretty well covered so again thank you everybody for all the support for watching the
video to the end here and just remember to take life one day at a time I'll see you in the next one
