Bale-grazing Sheep & Goats in Minnesota ❄️🐑

The Herbivores
69 followers
Hey YouTube, Jonathan here, Kilpatrick Land and Livestock. It is December 24th, Christmas Eve,
so Merry Christmas everyone. It's an absolute winter wonderland out here. We had a warm,
warmer and moist air system come through and left all this horror frost on the trees, so
it's just gorgeous. It's about 25 degrees, so it's actually warmed up quite a bit
from the zero degree and the negative weather that we were having. So
yeah, I wanted to give a little update and do a video on bale grazing the sheep and goats. I've
been kind of a little bit quiet here because I've been playing around with the bale grazing here for
the last month and kind of wanted to get an idea of what I was doing at least a little bit better
before I shot a video, but now I think I've kind of got a system down and I kind of wanted to share
what we're doing here in west central Minnesota. So there's 80 head here, 30 goats and about 50
sheep. And I just put the rams and bucks in the other day, so we'll have middle of May,
late May babies. So here's one of them that I bought. He's a little bit of an older ram,
came with the set of ewes that I bought this fall. He's been getting right to work.
There's another one over here that I'm actually borrowing and I'm really impressed with this guy.
He's a younger ram, but he is solid. He's a little woolier than I like, but
he's got the muscling that I want. And then there's a
bower buck in here somewhere. I'll point him out if I see him. So anyhow, yeah, bale grazing.
I might do a couple of videos and break it up. So as you can see, I've got hay set out ahead of me
here, and then you can see back, that was the last bale that we just, I literally just moved
them to these new bales yesterday. So I had a fence right here, picked up the fence and I'll
talk about that, how I've been doing the fencing and I'll show you some things I've been experimenting
with, but they're still cleaning up this last bale. But what I've been doing, these are really
big bales. They're five by six round bales that I got. And I picked up a couple cattle panels
and what I'm doing is using those kind of as a hay feeder. I'm wrapping them around the bales.
And so initially I just tried to see if they would eat the hay through the square holes there,
but they really weren't able to get to it. So here's a tape measure. These are
like eight by six, eight by six squares. And I tried doing that and they really
weren't able to get enough consumption. So then what I started doing is I've cut,
you can see I've cut one of the rods. So now I'm making a much bigger opening. And so I've spaced
those. I think this is the one. Yeah. So on the bottom, I've got them every other. So there's
one opening, no opening, opening all the way around. And then it alternated. So the next
row up, so there's an opening there, opening there, and they kind of just staggered them.
So, so far that has been working well. Does seem to be cutting the waste, keeps the bales up.
And yeah, kind of a good balance of letting them access the hay, but also
not too much access and trying to control a little bit of the waste. Although I have
been finding that they've been doing such a good job cleaning up this hay. It's a fairly
good quality hay. So because these bales are five by six bales, these panels actually don't,
won't fit all the way around. So what I've had to do until they eat the bale down is I've got a
ratchet strap that I'm using just to keep the ends together. See it right here, right there,
just a ratchet strap that I hooked on and I just wrap it, pull it tight and then crank it.
And then as they eat the bale, I'm just tightening that ratchet strap up. And then
when I finally get the two ends close enough, I'll just take a metal clip and clip them together.
I don't know if I have one of those clips out here. I can go to the other one and show you,
but yeah, they do pull more hay out of there. Oh, here's the clip. So I just use one of these
clips, clip them together, take the ratchet strap off and we're good to go. So yeah, that's been
working. Obviously there's going to be more refinement than I'm going to do to the system,
but I really like not having to come out here every day and roll out hay. For those of you who
may be not super familiar with bale grazing in Northern climates, it's pretty common, more common
practice than probably down South. When you have a hard frozen ground, you can set out sometimes a
whole winter's worth of hay, kind of like this in a pattern. These are probably, I don't know, 50,
60 feet apart or so. Some people space them 30, 40. And you can just set out almost your hay in
about a day. And then when it's cold out, you don't have to start the tractor, try to get a
diesel going and all that. You just pick up fences and rip off the net wrap. So very common up here
in Minnesota, Canada, these Northern climates. So yeah, here's another second bale, same idea
on this one, just alternating where I cut the holes. And you can see that I'm trying to pull
hay out of here. One thing I have noticed though, on some of the bales, because sheep and goats are
not quite as strong as say cattle are, if you do have an outer coating of like hay that's either
rained on or a little bit moldy or kind of stuck together, I have taken my hay fork and peeled off
like the first layer and just so that I can get to the, so it's a little bit more, yeah, so it's a
little easier for them to get at just because they're not as strong as like a cow. And because
I am restricting their access to the bale with the panel. Another thing on these panels, these
are not just your like fleet farm or farm store. These are actually quarter inch, I think they're
quarter inch rod. Maybe they're just four gauge or two gauge. They're not just like a chintzy,
like regular, these are much thicker. And I was actually trying to find a thicker panel,
but these are like the strongest and the sturdiest panels I could find.
Take my tape measure and measure that. I thought it was quarter inch. Might have been something
different. Yeah, it's pretty much quarter inch, pretty close to quarter inch rod. So they're
very strong. And I did actually, whoops, on this end, I bent, I just stood on the ground and bent
this side up a little bit just to help them when they, when the ends do come together. So
anyhow, I'm going to sign off for now, but go ahead and subscribe because I'm going to do a
couple more videos and show you more parts of this as we go, such as my fencing setup. I got
some stuff I'll talk about how I'm using the nets on frozen ground. This gives you an idea of how
I'm doing it, what nets I'm using. And I'll talk about just overwintering in general. Now that
I've got a month, month and a half under my belt here, and we've been through some pretty cold
weather. We've been through negative 15 with up to 40, 40 mile per hour winds. So I can talk about
my windbreak in the water. So yeah, go ahead and subscribe, like and subscribe, share with
friends that you think would enjoy this content. And in a couple days, I'll shoot another one and
drop it part two to this. So yeah, Merry Christmas, everyone. Enjoy your time with family and friends
and we'll, we'll be back with another video here soon.
