LBT-6094 Low Profile, LBT-2586J, LBX-4020 Armatus Gen 2

Ballistic Lab
1 follower
1 Video View·Dec 30, 2025
Thoughts, features, and an overview. tracking---hbsdhjfgsdlkglkbsdggbgk1u64587623jghddhgwrgg---tracking
Alright, hey guys, I know it's been a while since I did a video
You guys are probably hoping I had forgotten how to do this all together, which is not untrue
But I'm gonna kick this back off try to get back in the swing of things
Try to mix it up a little bit today. We're gonna do kind of a kind of a three-part thing here, so
we're gonna go over the
LBX
armadis plate carrier the LBT
6094 low-profile and then we're gonna go over this quick-release assault panel the
2586 J, I believe
So I'm gonna go over how those all interact
And then kind of my thoughts for how to make the best of this system
I think most people are familiar with the 6094. It's kind of the gold standard for plate carriers not saying it's the best
But it's about the baseline for what I would consider a
functional quality plate carrier and then a lot of people are also
familiar with the
6094 slick so the low-profile is kind of in between and then the armadis is obviously a
Different animal all together, so we'll look at them separately and then
How to use them together, which is kind of odd
All right, so for the sake of tossing these things around and
Not having them fall over from either being too heavy or too floppy stuck some soft armor batteries in there
To give it some sort of structure so starting things off with the 6094 low-profile, right?
It's been a while since I've owned a slick
But some here's the main difference that I can remember is the slick doesn't have the cummerbund flap here
All right, so this is a very standard cummerbund flap, right? You lift it up from the bottom
Your Velcro field underneath so the low-profile comes with an elastic cummerbund
But you could use anything you want as far as the fronts concerned
standard
cummerbund flap
Moving up. It has the LVT
GRG pouch capability, which I'm a huge fan of all right, I
Like being able to have reference sheets without needing an entire admin
so
And right there you've got the ability for your
your clear sheet with whatever kind of reference material they need in there and then you still have the
The slip pocket up top the slash pocket for some of your bulkier items. All right, so I'm big fan of that
it also has the
kangaroo pocket
Behind that Velcro flap. So if you're not using the GRG pouch
This lower flap here seals your kangaroo pocket
And yeah, you can use that for whatever you want
I've seen people shove holsters in there and keep a keep your mag if you need to
Clear out your weapon and you don't want to you know, throw it in the pocket or something you do that
All right. It's also got
some routing cables here
and then your
Kind of your your LVT version of where you would put a placard on
We'll get to that in a little bit, but that's what that's there for
The straps are standard 2-inch webbing straps. Nothing special there. We've got a lot of adjustability
They do have kind of a long tail depending on how how high you ride your plates. So you'll have to deal with that
All right, and then the back as far as I can remember is exactly the same as a slick
So you've got your three rows of molly webbing and then your bottom row
If you're at all like me and it bugs you
Just know that the newer versions have the five columns on the bottom
At one point in time. I had a slick that had six on the bottom
So just know that they're out there both ways and just pay attention if it bothers you one way or the other
And then you have a full
Cumberbund sleeve on the back here. So
You are not stuck using the elastic you can throw in
Basically anything you want so you get aftermarket cummerbunds
You can get a regular 6094 cummerbund in there, which gives you the ability to have your radio pouches
Up front on the cummerbund. So a lot of different options there
This is sized medium
And that is a true medium you can fit medium you sappy's in there just fine
Small you sappy's ride. Okay, they've got a little bit of flop
But they're alright and then you're in conjunction with plates fit. No problem
With the soft armor backer. Alright, so the 6094 low profile is true size. You can fit the advertised plates in there
All right now moving on to the
2586
J. All right. I think the J is what gets you the internal pockets
versus
Something else I can't remember
anywho
2586
Quick attach assault panel something along those lines. All right, not a huge huge fan of the way
LVT has kind of adapted to the whole
placard idea
But to their defense, I think this has been out a good bit longer than they've been popular. So
Yeah, I don't know and I haven't seen a
super-recent 6094 so maybe it's changed a little bit but
You're you're 2586 comes with these little dude ads here
That are on top of these
Kind of repair buckle setups here. I
Knew at one point in time how you thread these on the things
I don't remember what exactly these are used for unless they're for sitting in
Horizontal molly and then this catches on the stitching. I'm pretty sure that's what it's for
However, that doesn't work on the low profile. It might work on the regular 6094
All right
so what I've done is I just took that off and I clipped the buckle straight to the vertical webbing and then
There's no velcro or anything on the back of that thing so you get a full two-inch
Waistband basically that you route through your rear cummerbund flap and buckle on to the vest
And that's what what retains this thing tight to your body
Again, it's not the cleanest setup, but I do like the functionality of the panel
Because it makes up for not having a real cummerbund, all right, it gives you two radio pouches and then a
Big kangaroo pocket
So in here right now, I have the the five five six pocket
And you see it'll fit, you know standard
Metal GI mags, it'll fit P mags. It'll fit the 40 round P mags granted
they sit really high and that bungee is kind of tight and you can even put a
Glock 19 in there and it retains it fairly well. All right, and then for radios
It fits
148 it's like a glove. In fact, it's kind of a challenge to get them in there and then it'll also fit a
XTS 5000
Or XTS series Motorola radio with a side connector
So the side connector is the biggest hassle for those Motorola's
From my experience, there's a lot of radio pouches that'll fit the bigger
152s and 148s won't fit a Motorola once you get the side connector on there. This rides high enough that it sits in there fine
You can see that right there no big deal. All right, right
You can also get a 7.62 insert for this thing
The 7.62 insert works just fine for the mags, but it does leave a little bit to be desired
Because it's so much narrower than the 5.56 panel that when you swap it out, there's a lot of slop in there
All right
This pocket retains the mags fine
But there's a there's a good bit of give and it's it's compounded when you have this with less velcro surface area
So the 2586 I would not necessarily recommend with 7.62 mags
5.56 it works just fine
And then you can see the 7.62 insert that's also an option for this thing will fit your 20 20 round
P mags your 25 round P mags and it'll fit scar heavy mags
I just don't have any of those because I don't rate a scar, but they do fit. All right
So that's 2586
the
backside of this is
completely slick
No velcro to retain anything so just know if you're planning on going that route
You have to use that waist strap. It's got to be tight. That thing is gonna be bouncing all over the place
So now we'll take a look at the Arminus and see what's going on there
All right. So this is now the LBX
Arminus plate carrier
Model numbers LBX 40 20. All right, if you're not familiar with LBX
It's the
Blatantly overseas
Line from LBT. All right
they are I
Think they're made in Peru. It's been a while since I've seen the tag on one of these
Theoretically, it's still got the LB LBT
Quality control on it. I'm gonna be totally honest. I've given a lot of LBX products a try and
I don't have any real complaints as far as the quality goes
Especially not in comparison to LBT. I think they're very similar
I've checked out both fabrics under nods. I think they're the same fabric. I haven't seen any of that goofy like Chinese night-vision glow
That being said it is overseas. So
If you have figured out the Barry Amendment and how that actually applies to you
Kudos, I haven't figured that out
But these are not very compliant. All right
So looking at the overall features here
This is the the Chris Costa plate carrier, right?
so it has instead of a
Open top kangaroo pocket. It's got this zippered compartment. There's no no internal
Organization or anything
It's fairly good size. It goes down to the bottom of the velcro there and then it's got the zipper
so
It's feasible. You could work out of that while you're wearing it. I probably wouldn't have the best look
I feel like maybe I'm wearing my plates too high, but I really can't get into those those
Slashpockets on bus even my JPC is it's goofy
They have significantly cleaned up on this how they
Approach their placards. However, they went a little too far. So
And this is I don't this is not well advertised by LBX
But you've got a variety of placards you can get for this thing they have a straight
Molly placard, they have a 3m 4 mag placard and
then they have a
Placard version of this which they call the assaulter panel
which is
Kind of a badass setup if it works for you. It's three m4 mags
two of them are tacos one of them is a
just a
kind of a shingle type and then you've got two pistol tacos and two
Kydex retention pistol pockets there with a little kydex wing in the bottom
Almost like a like a super short
Kiwi if you've used one of those so a lot of options there, you know, you know pistol mags Gerber flashlight
Whatever. It'll hold it just fine
I'm not a huge fan of pistol mags on my vest, but it's an option there
All right. I just happen to have the Molly version, but they do make a placard version. Okay
The the biggest complaint I have here is they used three quarter inch buckles
instead of the
entire rest of the industry using one inch buckles, so you cannot get an
Armatus and throw any placard you want on there, especially because and this is kind of a cool feature
But it really cuts down your abilities here. They have sewn a fabric cover over the buckle
It makes it look way more streamlined
Your buckles are probably going to be a little bit more resilient
But it basically makes any any chance of modifying that to a one-inch buckle
Move-point, okay, maybe just pinch there and that comes off like any other placard. It flips up just like
Again you can use any any cummerbund you want. All right, I
Don't know if these pads are stock. I got this thing used. These are fairly nice pads
But again, there's plenty of options out there for padding
Moving on to the back. This one is not nearly as much of an annoyance for me
again, it's three quarter inch buckles, but
There's not really any standardization on back panels
So it's not a huge deal and LBX has enough back panels out there that you should be able to fill whatever need you have
So this is kind of their their backpack back panel. You've got this like mesh beaver tail thing here
It'll fit a good size helmet without any worries
Which has a lot of volume, all right, you could fit like a whole change of clothes in there, but it's still rather streamlined
and then I really like the way they did this because
the only thing holding this on are those two buckles a
whole velcro field so
Theoretically you could have
custom placards made
Real easy for the back as long as they're using three quarter inch buckles with the right spacing
This is just a velcro field. There's no weaving anything. There's no zippers
It does not move if you don't want it to move. It's really nice. All right, and then you've got
a channel for
Your cummerbund so you could use any aftermarket cummerbund on this that you wanted or any of the other LBT cummerbunds
and only goofy thing
That's worth pointing out on here that I hadn't noticed before
So you've got fairly standard plate pockets down here
But each each portion of the vest
also has a
Whole separate pocket now, I don't know if that was intended for soft armor to go in there or what?
But there's a little bit of foam in there
That came in there stop
And then you could use that for one of those
Inside the vest ifax if you wanted if you're one of those guys who likes to carry a flag just because
You can stick that in there really easy
And it doesn't interfere with your plate at all plates
Come go in and out of these things real easy. Let's do the soft armor panel in there
I will say the plate sizing on the arm of this with this thing being a medium is
A little bit small a medium e sappy
Is gonna be the extreme of a shoehorn fit in here. It's gonna be real difficult. I
Can fit a medium?
Sappy in there
It's super tight. All right, but it's doable. You got to shake it out when you're trying to change out your plates
We'll move them to a different vest, but they will go in there
You sappy that's gonna be questionable. All right, small e sappy is fit
Perfect in here. They should have just called it a small vest and been done with it
But it's a medium
All right. So that's the arm. It is too
I'm gonna I'm gonna pause this and I'm gonna show you one last idea I have for this thing
All right, so to wrap this up I'm gonna call this the the LBT Black Friday special, all right
oddly enough the arm of this too is
The most expensive portion of this setup it doesn't seem to go on sale and when it does go on sale
It's not much of one but LBT is fairly reliable
Any holiday imaginable they run some sort of sale. So
The low-profile I picked up last Black Friday, I believe for $100 so
With that in mind if you have an arm, it's a sue
This is a pretty easy swap to make so the front and back panel on
All of the 1694 is as far as I know are compatible with each other
So this is probably how many use this thing
So
Low-profile front panel does everything I need it to do. All right, it's got Molly
It's got the GRG pouch, which I dig. It's got the the kangaroo admin pocket up there
it's even got a little bit of a
Kangaroo pocket on the inside. No for sure what you would put there
But it's there if you want it it's got the kangaroo pocket behind the GRG so you hide some stuff in there
All sorts of stuff. It's got the cable routing which is cool
And then you know, it can take the the cell panel if wanted
I'll probably go so far as to cut the molly
Off of here if I need to use this still velcro back. It'll stick just fine
But that'll let me use velcro back to placards
Which I'm a huge fan of because you can swap from five five six seven six two real easy
Or you can dump it all together
If you're trying to you know, get super low profile in the front so you can go prone better
All right, and then we've got the mesh cummerbund from the armors to that thing's pretty pretty legit
Especially, you know not having to go shopping for an aftermarket cummerbund
but then
I've got the armors to back panel on there
So I showed you that that goofy pocket on there that'll hold the soft armor
Medium medium cut soft armor backer so I can put a medium sappy in there and I don't have to worry about not having that
Soft armor and I don't have to worry about trying to fit a medium e sappy in that plate pocket
Which is gonna be wicked tight. All right
Like I was saying the armors to back panels
I can forgive the three quarter inch buckles because they have enough options. They've got the backpack
They've got a molly panel and then they've got a banger panel
Which I believe is four bangers up top and a GP pocket on the bottom. So plenty of options
I can't imagine that I would find any of those that don't fit some need so
LBT low-profile front panel
LBX armors to back panel, you know, it's a little bit more up front
but then you have a whole second plate carrier that you can sell off and
You're probably looking at a pretty decent budget setup at that point
As I'm sure there's somebody out there
It'll take your your armors to front panel with basically any back panel and it'll be fine
If you guys got any questions, please hit me up if you want to see something. Let me know
I've got a lot of stuff that I can that I can run through
It's just finding the time to do it. So if you guys have preferences, please let me know
If you can give me a
Subscribe that would help me out
Or some comments so that I know what you want. Appreciate your time and I hope this answered some questions for you. Thanks
