Throw Perfect Wide Rim Bowls With This One Simple Technique

Ceramic Art Studio
35 followers
Dec 30, 2025
n this video I show you how I easily throw a wide rimmed bowl. These bowls are perfect for soup, casseroles, salads or fruit. They can be a little tricky with rims that become uneven and collapse. So I show you my one method that really works, allowing you to make wide rims that are even and consistent. If you can throw a simple bowl on the wheel, you can throw a wide rimmed bowl!
I find the POT HOLDER so invaluable for all matters glazing. It is so handy. Here is one you can use:
https://amzn.to/4cnkqgm
00:00 Intro
00:13 Let's get started
02:00 The important part...
03:00 Dry to leather-hard
04:18 Bisque & glaze
05:28 Extra dip
06:03 Glaze fire
07:01 End
Flat rim balls can be deceptively difficult with rims that slump.
So today I'm going to show you how you could make flat rim balls with ease.
It's really one tip and it's a game changer.
I've prepared 1.2 kilos of clay. I'm using a fine white mid-fire clay.
My clay is quite soft and that makes it easier to center.
Once I center, I flatten the clay. I flatten to about 14 centimeters across.
This is about the length of my pinky to the base of my palm.
And now I push down into the clay and open out.
Watch my hand position as I open out. I'm really controlling the clay with my left hand.
I've also opened out with a bit of a curve.
This is essentially a soup bowl and I want a really open curve.
I compress the base with a sponge and I start forming the walls.
Each time I pull up clay I remember to compress the rim.
A sturdy rim is important later when I start to modify the shape of the rim.
I bring the walls up about two centimeters taller than my final size.
So at this stage I'm after quite an upright bowl.
It's about 20 centimeters across.
And now for the important part. I take my rib
and I press down on about 2.5 centimeters of the rim.
Notice how I'm supporting the underside of the rim with my left hand.
Now it's really important that you don't press the rim down flat.
The rim is now at about a 15 degree angle.
Any flatter and it's going to start to collapse.
One simple move for the rim.
So I trim around the base.
It's really important not to keep on shaping at this point.
I just check to make sure the final width is right.
And then I can wire through.
I set aside to dry to leather hard.
I flip my leather hard bowl, place it on the wheel and center.
You really want to be sure your bowl is dry enough for this or your rim might distort.
I attach with clay lugs.
And now I trim.
I start by removing the clay around the base.
And then I shape.
I trim across the base.
I'm not trimming a foot ring today.
But I am trimming a depression into the base.
So the bowl sits well.
And then I smooth with a rib.
And that's it.
I set aside to dry and then bisque fire.
Once bisque fired, I glaze.
I'm using two glazes.
I'm using a base glaze.
This one's happily called Outback.
And it'll be a soft sandy color.
I tidy up the base.
And then I'm ready to use another color on the rim.
So for the rim, I'm using a soft eucalyptus colored glaze.
And I'm using a pot holder.
I'm using the holder to just dip the bowl up to about the heart of the flattened rim.
After a quick touch up, it's time to fire.
And here we are.
Soft colors.
Perfect for soup bowls.
And the shape is great for soup as the open form allows the soup to cool.
A flat rimmed soup bowl in one easy move.
Just make sure you leave that move to the end.
And if you're after some wide bowls without the rim, check out my pasta bowl video.
Or if you're interested in making something a little larger,
check out my large fruit bowl video.
I hope you find these videos useful.
Like and comment below.
And if you haven't already done so,
hit the subscribe button to find out what's coming next.
As always, happy potting.
