How to Turn Toilet Paper Rolls Into DIY Boxes

Create & Repair on all materials
114 followers
5 Video Views·Dec 28, 2025
What if I told you empty toilet paper tubes could become miniature cardboard boxes?
They're fun, they're resourceful, and they're even a little bit useful.
So grab your empty rolls, and I'll show you how to transform trash into treasure.
Take your toilet paper roll, squish it flat, and press down the edges.
To get a good crease, you can run something smooth along the edges.
A bone folder is the proper tool for this task, but I just used the back of a metal spoon.
Next, mark 1 cm in from the folded edge,
and use something sharp, I used an old seam ripper, to lightly score this line.
Fold along that line, and press the cardboard flat again.
This process creates the sides of the box.
Here you can begin to see it's taking its shape.
Next, from one of the open sides of the box, measure two lines.
One that is 3 cm from the edge, and one that is 2 cm from the edge.
Score these lines, and repeat on the other side.
Using scissors, cut along the fold to the 3 cm line.
Repeat on the other corner.
Fold back the flap so it is out of the way, and cut along the 3 cm line.
This creates the top flap of the box.
We will use the part that we removed to create the bottom.
Trim off the sides along where you folded.
Set those aside, as we'll use them later.
Here, I like to round off the sharp corners.
I do the same with the top flap.
The bottom piece should already have one scored line 1 cm in from one of the long edges.
Measure and score another line, also 1 cm in from the opposite edge.
Fold along these lines.
The base of the box is ready to be glued.
Apply glue along the inside of each flap.
Position the piece on the bottom of the box, and allow it to dry.
The constructed box will look something like this.
Now, it's time to decorate.
I like to use acrylic paints to make patterns inspired by vintage fabrics,
but the sky's the limit here.
You can use markers, glitter, whatever you want.
To apply the twine, take one of those folds you cut off earlier,
and trim it down to a small piece.
I like to make mine circular, roughly the size of an M&M,
but you can also do rectangles or squares.
To determine how much twine you'd like, wrap it around the box a few times and trim.
Apply a dot of glue to your small cardboard piece.
Position one end of the twine in the middle of the dot of glue.
Glue this to the inside of the flap, with the twine running away from the top.
I like to use clothespins to hold this in place while it dries.
Now, let's add the button.
Old button jars are a great resource for this part.
Wrap your twine around the box to determine where you would like your button to sit.
I like to put mine right where the top flap meets the body of the box.
Thread your twine through one of the button holes,
and out the opposite hole.
Tie a knot on the underside of the button,
and trim off the excess twine.
I like to leave a little bit of a tail.
To secure the box, wrap it up once more,
and slide the button under the strands of twine.
And there you have it!
From everyday household waste, to cute and useful boxes.
These are perfect for storing a variety of small items,
or you can even give them to someone with a little gift inside.
What would you keep inside of these?
Let me know in the comments, and be sure to subscribe for more resourceful content.
