Tech Repair Technicians Repair Tools & Setup

Create & Repair on all materials
114 followers
2 Video Views·Mar 31, 2026
AI Generated·May contain errors
I've been repairing phones, tablets and computers for almost 14 years here on YouTube
and have come to accumulate a lot of tools and equipment to make those repairs possible.
While I'm just a hobbyist repairer turned YouTuber, I hope you'll find enjoyment in
learning about what equipment I use and maybe even discover some new things that you haven't
heard of or seen before. It's been five years since I first set up my office and last covered
the equipment I use. A lot has changed since then but some things have stayed the same.
A proper tool chest was one of the earliest changes I made after making that video.
It changed the entire way I organize my tools. It's a bit strange to have one of these inside
your house but as this room is my workspace it blends in okay. The very top tends to house larger
objects that don't fit inside the drawers such as chemicals and a large glue gun but it's also
where I keep my magnetic mats. I usually stick with the white ones as they're easier on the eyes
making the screws easier to see. The first of the drawers is pretty uneventful containing some
basic stationary and spare odds and ends. The center one however contains all of my soldering
utensils including solder, soldering iron tips, flux, solder mask and other things. The right
drawer contains nothing eventful so moving down a row you'll find a range of screen protectors
that I apply after repairing a phone screen, though usually I don't have the one I'm looking
for at the time. Preceding that is all my programmers and electronic testing equipment.
This JCID is an iPhone programmer that with adapter boards can reprogram displays and batteries
which used to be a critical part of iPhone repair prior to recent law changes and iOS 18
now allowing the use of True Tone and battery health without reprogramming or other hacky
workarounds. However you can still test loose batteries to read health data and cycle count.
The JC Pro was a similar tool however it could also reprogram individual iPhone chips including
the NAND, although shortly after I got this one they stopped making adapter boards for it.
One of the many things you may have seen me use is this USB amp meter. These can be acquired cheaply
and provide a voltage and current readout which can help in determining if a device is charging
or drawing current. My particular unit accepts USB-A, C or micro USB and outputs via USB-A or C
which means it can be used in a wide variety of scenarios. This one is similar however it's
designed to work with the iPhone allowing you to also read the serial number and boot the device
into recovery mode just by plugging this tool in. Other tools include an ethernet cable tester and
a mysterious black box that can wipe a BIOS password in seconds. Or how about this tool?
This can brute force an iPhone passcode. Designed for iOS 7 it natively supported up to iOS 8.2 for
64-bit but you can get it working up to iOS 9 on a 32-bit iPhone. iOS 10 blocked keyboard input for
I use this specific tool to recover data from a locked phone. I also have a few development
boards that have been used for various things over the years. My multimeter is also in here
although I must get myself a new one of much better quality. The next drawer contains some
of my more general tools like wire strippers, scissors and picks. This drawer changes constantly
as some of my more general tools like hammers, spanners and the like are kept in the garden shed
but get left in here from time to time. If you're looking for pliers these are my favorite,
the Marvel linesman pliers. They're designed for sparkies but even if you're not an electrician
they have a grip that will cut into whatever you're holding unlike cheap pliers that slip
off everything you grab with them. Easily worth the $60 they cost. Also in here are my crimpers
for antenna and ethernet cables which I've used throughout work I've been doing to my house.
Below general tools are my screwdrivers. I have a set of insulated drivers for working on mains
voltage electronics, precision long reach drivers and iFixit's large bit set. Also in here I've
stashed away my mini spot welder which can be used to make battery packs for laptops and other
devices. Below that is my main toolkit the iFixit ProTek. While it's been a while since I've done
any sponsorships with iFixit it's still my recommendation to anyone fixing small electronics.
The one bit I always manage to break is the T6 bit which I've done on two of their toolkits.
Oddly also in this drawer is my lock pick set which I required to be able to re-pin some old
locks which had no keys. A skill I'm not very good at but enjoy doing. I also have one of Apple's
official repair trays which I used in my Apple self-repair video. I like the idea of it but it's
to each iPhone model which makes it kind of useless unless you own each one. In the lower
section of this tool chest I have two drawers dedicated to adhesives. The top one containing
liquid and tape based adhesive while the lower drawer contains all of the pre-cut model specific
adhesives for many Samsung, Apple and Google models. Sometimes you only need one piece of
adhesive but it can only be purchased in larger quantities which is why I've accumulated so much.
The next drawer is something Apple users can relate to. Dongles. Okay so they're not all
Apple adapters but most of them are. Also stored in here is power adapters and iPhone docks from
back in the day when I had a display of phones. Is there anyone old enough to remember when keyboards
use this DIN connector? It predates me but for some reason I have an adapter for it anyway.
Along with the oddest adapter I have, an Apple 30-pin to USB-C adapter. I couldn't believe that
this was a thing. The quality of the adapter is unfortunately not very good so it's hard to plug
in the 30-pin cable but it does work. It's the cable for those who use an iPod but also an Android
or I suppose the newer iPhones. I also have a drawer dedicated to cleaning supplies and PPE
including brushes, an air duster and cleaning cloths. I also have a supply of computer parts
mostly consisting of old hard drives and RAM but there's a few SSDs in here too. If you're
wondering why I've labeled some not to sell it's because they've come from my personal computers.
Even though they were encrypted and securely wiped several times I would still prefer to
keep them for my own use in computers or backup drives. I had a mate 3D print me these awesome RAM
holders but I need some for SSDs and other miscellaneous pieces. I also have the smallest
hard drive ever made. It uses a micro flash interface and was originally found in the iPod
mini. This 4 gigabyte mechanical hard drive is a feat of engineering. I opened up a broken one to
photograph it. That's a normal sized desktop drive behind it. For you phone collectors,
most of my phones can be found in this next drawer. Most of these are outdated as anything
of great value or usability I sell on so it can be reused. After all, I don't fix things so they
can sit in a drawer. I covered a video recently on the phones I have including my custom design
devices so if you want to see this more in depth check out that video. The last two drawers aren't
related at all to tech repair but as we've looked at what's in the rest of this tool chest you might
as well have a peer in here too. Firstly we have my camera drawer with my secondary camera, an
original YouTube camera, along with another drawer for my power tools. Outside the tool chest there
is still equipment worth covering including my small soldering station, hot air rework station,
and power supply I built as a school project many years ago. Beside that is my other large
soldering iron and heat plate used for opening phones. Above is a fume extraction system and
some boxes for computer cables, batteries, and accessories. I have some workspace too, one where I
do all my filming and a secondary workbench where I do soldering and keep projects I'm currently
working on, including this relic from the past. Anyone able to guess what it is? It predates the
transistor and PCBs and is entirely soldered using point-to-point connections. I still also have my
although I haven't used it in quite some time. It was useful for iPhone back glass repairs,
but newer models are thankfully easier to repair. That being said, I've still made some unique phones
using it. To utilize some of those hard drives in my computer parts drawer, I also have my trusty
hard drive dock which I bought for five dollars from someone who'd purchased the wrong thing and
didn't understand what it did. Under the workbench is my phone parts, including test screens, batteries,
and screws, as well as other small parts salvaged from old phones, because you just never know when
you're going to need some obscure part urgently or can't purchase one online. I also have another
box of parts devices, which I've showcased on several occasions, as well as a stack of laptops
and phones that need repair, some of which will receive their own videos, others may just be sold
on as-is or sent to e-waste. Only time will tell. Along with all the physical tools and equipment
I use to repair devices, I also use iTest, software I developed to test smartphones before
and after repair. It can find spoofed hardware info commonly found on cheap AliExpress phones,
test major hardware functions like the touchscreen, cameras, gyroscope, and light sensor,
to providing you an easy way to check for screen burn-in and much more.
Download iTest today, available for both Android and iOS. With that, I hope you enjoyed a tour of
my workspace and the tools and equipment I use to repair electronics. And on that note,
this has been a Hugh Jeffries video. If you like what you saw, consider subscribing and check out
the phone restoration playlist for more videos just like this one. And if you're looking for
any used devices, be sure to check out my online store, link for which is down in the description.
That's all for this video and I'll catch you guys next time.
