Why My Colorado ZR2 Left Me Stranded… TWICE

Outlandish Overland
100 followers
932 Video Views·Dec 25, 2025
In this video, I break down the mechanical failure that left our Colorado ZR2 stranded twice. We walk through the full chain of events, all the parts the dealer changed, and how the dealer was finally able to track down the root cause of the problem.
If you off-road or overland your Chevy Colorado ZR2, this is something you need to be aware of. What started as a minor issue quickly escalated into a serious failure that could affect other ZR2 owners who off-road.
Subscribe for More Offroading, Overland, and ZR2 content
➡️https://www.youtube.com/channel/UCkjK5XQ5pypY19ca5S89wnw?sub_confirmation=1⬅️
Follow Us on Social Media
Instagram: https://www.instagram.com/outlandishoverland/
Facebook: https://www.facebook.com/profile.php?id=100087731377962
What's going on, guys? We are back with
another video. My name is Armono, and in
this video, which has been highly
requested by you guys, we are going over
what exactly caused the failure on my
Colorado ZR2 to leave us stranded twice
out on the trails. Now, I wanted to make
this a dedicated YouTube video because I
feel like this is a potential problem
for Colorado owners that plan to go
off-roading and wanted to show you the
fail point on camera. But before we get
into that, I wanted to go over all the
steps that the dealer took prior to
finding the actual root cause and what
led up to it. So, how this originally
started was our trip out to Colorado
that we had a multi-day trip planned and
we were going up Skullfields Pass and
that's when we ended up breaking down
which I'm sure a lot of you have seen
that video. What specifically was
happening with the truck is while we
were going up a shelf road, all of a
sudden a bunch of lights came on the
dash and no power was being transferred
to the wheels. the engine would rev up
in RPMs, but it was almost like if
something electronically or almost like
the torque converter wasn't engaging and
no power was being transmitted to the
wheels. So, we ended up having to
basically sit there with Richard's code
reader, clear a lot of codes.
Eventually, once we cleared those codes,
we were able to get it moving again and
limp it off the trail. We ended up
taking it to the dealer. The dealer
deemed that the ECM was faulty and it
had failed. So, they replaced it with a
brand new ECM, got the truck back, and
everything seemed fine. A few weeks
later, we ended up going down to Moab to
do some scouting for the Red Rock Rally
event that we were hosting and see what
trails we were going to do for that
event. And that was also kind of the
shakedown run to make sure everything
was good with the ZR2. On the first day
of scouting, I did have one instance
going down trail kind of fast pace where
I ended up losing power to the wheels
for like half a second. Lights flashed
on the dash during that time and then it
went away. Had no codes, no check engine
light. It's very strange. The next day
we did more trail riding, had no issues.
So, as precaution, I ended up taking to
the dealer and said, "Hey, I had this
one instance where the lights popped up
and I lost power." They checked and they
said everything was fine. They couldn't
find anything wrong with the truck. So,
I kind of dismissed it as maybe it was
just a fluke. A few weeks after that
instance was officially the start of the
Red Rock Rally down in Moab, Utah. And
we were doing our pre-run with a few of
the guys that were going to the Red Rock
Rally on Hell's Roaring Rim, which
that's some of you may have seen that
video. We're out there. Truck was doing
great. We were almost done with the
trail and going up a hill. Same thing
happened all over again. What happened
in Colorado, but worse this time. We
ended up losing power and not only
power, but we also lost power steering.
Had absolutely no power steering. So
Paul was there with us and he had a
really good code reader and he was able
to clear the codes and once again with a
bunch of clearing the codes we were able
to limp it off the trail. We still had
no power steering which was quite the
mission to get the truck off on a trail
with no power steering but we were able
to limp it off and basically just use
the truck as a home base camping for the
next couple days and then traveling to
and from town if we needed anything. I
know a lot of you guys were asking in
the previous videos on what scanner tool
you recommend getting. And this is the
one that Paul was using, which is the X
tool. And as you can see, I have
purchased my own shortly after this
encounter. Highly, highly recommend. I'm
going to link it down in the description
below. You can buy it off of Amazon. It
has it is a little pricey, but there's
no subscription fee. It comes with its
own app and it's constantly updating the
app. Another really cool feature,
especially for the Colorado, I just
recently uh changed my brakes, so brake
pads and rotors. And for the rear
brakes, since they're electronic parking
brakes, in order to change out the pads,
you have to put the parking electronic
parking brake into service mode. And
this scanner tool can put it into
service mode. So, it's really cool. So,
really handy tool. Highly recommend.
I'll link it down in the description
below for those who are interested. So,
the next couple days were obviously the
Red Rock Rally event. And what we were
doing is we were leaving the truck at
the campsite we were at and just using
it as a camping base and we would
carpool with other a few other Colorado
ZR2 owners to go hit the trails and
still have a good time. On one of the
days, we decided where we needed a few
groceries, we had to go into town in
Moab. We took the truck in, parked it,
got our one or two items that we needed
from the grocery store, came out, and
the truck would not start at all. It was
completely dead in the water. We tried
to disconnect the battery for about 45
minutes, connected again, still would
not start. Paul ended up coming out with
his scanner that we have there now, and
tried clearing a bunch of codes. After
clearing a bunch of codes several times,
uh the truck was able to start, but it
would not go into gear. It was stuck in
the parking gear. You tried to put it in
any gear, reverse, neutral, drive, it
would not move. So, at that point, after
troubleshooting for several hours at it
was probably already 8 9:00, we threw in
the towel and decided to call for a tow
truck, which wouldn't be there till the
following morning. So the following
morning, the tow truck came, towed it,
and towed it back all the way to our
dealer, and the dealer started
diagnosing for more troubleshooting
issues. So now that it's at the dealer,
they start troubleshooting it. And the
first thing they think the problem was,
since it's had no power steering, it was
the power steering harness. So, they
ended up ordering a brand new power
steering harness, replaced the entire
harness, and it was still giving the
exact same issues. 3 weeks later at the
dealer of them trying to diagnose it and
figure out what was wrong with it, they
finally found the root cause, and that
was a chafed wire harness. So, the
picture I received from the dealer after
they finally found the root cause was
this is what my wire harness looked
like. All chewed up, several wires. You
can see the copper is exposed and that
was eventually what the root cause was
cuz I can safely say that because we've
done already a few trips and have had
zero issues. But I wanted to show you
guys which harness it was so that way
you are aware. So we got the airbox here
and right behind the airbox
you can see this wire harness right
here. So, if you follow it on my truck,
you can see that fresh loom wrapping
right here. That is where it was
chafing. So, it was chafing somewhere
along here. Uh, I'm not sure if it was
chafing on the actual airbox or against
this other wire loom that comes up this
way. It's kind of hard to see in there,
but that's where it was chafing.
Unfortunately, I don't know what
specifically that wire harness is for.
If anybody knows, please leave it down
in the comments below cuz I I did ask my
service advisor and he wasn't really
able to give me an answer on what
specifically that wire harness is for.
But I wanted to make this video because
originally I thought it was a one-off
situation until I reached out to our
WhatsApp group that we had for the Red
Rock Rally and asked a bunch of the ZR2
owners in there, hey, has anybody had,
you know, this was my issue. you know, I
wanted to see if everybody could check
out their wire harness and see what
theirs looked like. Well, in that we had
two instances of people having signs of
chafing. So, the first one was Jose and
his wasn't that severe, but it was the
early signs of the chafing. And I'll put
the picture up so you guys can see where
the jacket of the wire harness you can
start seeing early signs of that
chafing. And then the worst case
scenario or a more severe case was
Zach's ZR2 where you can see I'll put
also his picture up there. The complete
the jacket on the wire harness is
completely gone. And you can see the
exposed one exposed wire that you can
see that yellow wire there that's
completely exposed that was up next to
start wearing down all the way to the
copper and probably start shorting out
and having the same issues as me. So, I
wanted to put it out there because it
seems like if you do off-road your ZR2 a
lot with the vibrations and stuff like
that, this could be a major potential
issue for Colorado owners. For those of
you in the comment section in the
previous video saying, "Should have
bought a Toyota. Should have bought a
Jeep. Should have bought a Ford." Just
like to say, any vehicle with an OBD2
port has major wiring harnesses. And if
those major wiring harnesses chafe and
have exposed copper, you're going to
experience the exact same issue. Now, do
I fault Chevy a little bit for how that
wire harness is routed and not properly
secured? Yes. I feel like it could
properly be way better secured, but with
a few tie wraps, it's easily fixed so
that way it's not chafing or rubbing on
anything. What I can say for sure is the
wire harness was 100% the root cause of
all our electrical gremlins. The ECM
that was originally replaced after the
first Colorado breakdown was for sure a
side effect of the actual root cause
here. And I can say that without a fact
because we have done multiple trips
after this fix with completely no issues
whatsoever. So, if you found this video
helpful in any way, make sure to leave a
like and subscribe if you like content
like this. We'll see you guys in the
next video.
