Restoring a MYSTERIOUS vintage Swiss watch

Antique Adventures
14 followers
#Vintagewatch #AntiqueClock #HistoryDesign #VintageClock
On this episode we will learn how to make a custom
Dial. I will also show you how to service an EB betlach
EB1197 movement and how to elctroplate a nightmare case made from an unknown alien alloy.
Good Lord! Greetings good people and a very warm welcome to you all.
And here is a glimpse of what's coming up in today's fun packed episode.
What the hell are you?
To mod or not to mod? That is the question.
So today I'm faced with the harsh reality of knowing full well that even if I restore
this cheap and ugly watch back to factory original condition, it's still gonna look
cheap and ugly. So I was thinking of modifying this watch to give it a bespoke look so that
it looks like whatever the opposite is to cheap and ugly. Now I know that modifying
or altering Swiss watches is frowned upon and I myself am a bit of a purist when it
comes to keeping things factory. But this sort of behaviour is totally acceptable in
the Seiko community and even Rolex owners change their dials and bezels. But usually
with this sort of mud you can keep the original parts and swap them back. But what I'm about
to do is irreversible. And I had a tough time with this case as I don't even know
what it's made of. So let's go and see how I get on with this basket case. I'll
also be announcing the winners for the mechanical exploration watches at the end of this video
so stay tuned and no cheating by skipping to the end.
I had to scrape away the crud on this fused case just to find the slits for my knife.
Oh yeah. So in this ugly cocoon we have a tidy little 15 joule Swiss movement marked AS1197.
So it's fond acier inoxidable. Pardon my French. Look how many service marks are on there.
I haven't got a clue what metal this is but it's definitely not steel or brass for that matter.
You can see the size of the movement here and then you can see how big the dial is
attached to that movement. So you know definitely that that dial is not coming
through this little gap here. So you have to assume that it comes out the top.
Oh yeah. Not the prettiest of things but survived whatever nightmare it had.
You may have gone through onto the dial side but we'll just have to wait and see.
You can see there's nothing on the dial. No branding apart from 15 rubies.
Anti-magnetic Swiss made. This thing's got barnacles and all sorts.
And there we go. The ugly duckling has come out of its shell and turned into a caterpillar.
So I'm hoping whatever happened to this thing it didn't get past this
stem here. So the dial side should be okay as well.
Look at the state of all that. I reckon this watch was on the Titanic at some point.
Come back Jack. Let me get on the plank then you selfish cow.
There's enough room on there for the both of us.
So you can see the dial's got a few dents on it.
This dial doesn't want to come off but I can see that that foot is slightly bent.
I hope that it's not jammed because of something more sinister.
Come on. This thing doesn't want to budge does it?
So I had to have a little word with this thing behind closed doors away from the guests
so as not to embarrass it. All right, all right, all right.
Where have we seen this before? So it's an AS?
The movement is marked AS 1197 but it's actually an EB.
So I don't know what's going on here but there's one for you to research
and tell me about in the comments. So you can see this is actually a pin pallet.
So I've gone back onto the dial side because you can see that the click is on the dial side.
So we'll just let the power down.
I was secretly hoping that the movement wouldn't give me any grief on this one
so that we can concentrate on mudding it slightly.
Because the original, wherever it was, was obviously something cost effective.
Now that's a long screw. The movement is from the 50s and in those days
there was all sorts of intermingling that went on between Abushe manufacturers
but I don't know what the actual relationship was between Adolf Schild and Betlax
apart from maybe an ESA connection.
Look at these mean little triangles on the screw holes.
Anyway, that's stuck underneath the barrel bridge.
So we'll remove the barrel bridge and that looks pretty chewed up, doesn't it?
Someone has had this watch serviced on multiple occasions.
They must have loved this watch.
This may have been a relatively cheap way for someone to buy a Swiss watch which was unbranded.
So the average Joe at that time.
Someone maybe not so wealthy.
Put the latch away underneath.
So the intermingling continues as I recognise this keyless setup from the last Oris video I did.
Betlax were known for producing Roscoff movements with pin pallets
and Oris was another brand famous for using pin pallets.
So check out that video if you haven't already seen it.
And as I mentioned, this would have been a relatively cost effective way
for your average Joe of that time on a modest wage
to acquire a Swiss watch without getting a nosebleed.
And the fact that this one is unbranded gives us an indication
that these affordable movements were accessible by anyone who wanted to produce a batch of watches
such as an independent jewellery store which is probably how this watch came into being.
Oh dear.
So our setting lever spring is broken.
Or did I break it?
No, I didn't break it.
Honestly.
Let's carry on with the show.
In a way, these types of mass produced cheap movements
were sort of that Eureka Quartz moment of their day
where previously accurate timekeeping was usually a luxury reserved for the rich and famous
was now suddenly affordable.
Maybe not to the masses but at least to another income bracket.
EB did become part of the ESA group and produced various movements with interchangeable parts
hence why we recognise some of the parts.
They were used by many brands in many different models
and by 1967 EB was producing around 7 million movements per year
which is astonishing really
which may lead one to question whether these movements were designed as throwaway movements
never to be serviced
as servicing them may have cost more than the watch itself.
But the fact that this one is here with us 70 years later
having been serviced and maintained several times by its previous owner or owners
should lead us to believe otherwise.
1, 2, 3, 4, 5, 6, 7, 8 service marks in there.
So I have my replacement setting lever spring
and now I'm just going to give the parts a pre-clean with some L&R solution
before I stick it in the machine.
While I tell you about my plan for the rest of this restoration
I was thinking of changing the boring silver tone case with brass bezel
and making it look more luxurious by giving a two-tone yellow and rose gold finish
but that isn't going to be enough.
We have to do something with the dial.
In horology dial making is an art form that I most covet
but I don't have all the fancy gear needed for this most impressive of art forms.
Now I'm not saying I'm an artist
but art has been used throughout history as a form of expression, communication and resistance.
Artists such as Leonardo da Vinci, Michelangelo
What you mean like the Ninja Turtles?
Cowabunga dude?
Yes cowabunga dude.
From fear of persecution and cancellation by the establishment
artists used to leave hidden and sometimes obvious messages in their artwork
so resistance is the theme that I'll be using for our dial today.
I tried various designs and in the end found one that was pleasing.
I then experimented various techniques on a piece of brass to see what might work
and when I had an idea of how to make my design a reality
it was time to prep the dial.
So the dial's got all sorts of little bends and dings
so let's try and take those out
sort of leaning down this thing
I had some difficulty taking those dents out of the dial
so I gave the dial a coat of black paint to help with the process.
Now you can see those dents clearly so I'm just going to take those out.
Can we just leave it like that?
That looks good.
It looks like a mountain range doesn't it?
Giving it a little brush finish
So I took the dial back down to brass and then painted it with some grey primer.
My local store didn't have any black primer as that would have been better
as black is what I wanted as the base.
I then painted a layer of matte black followed by gloss white
and the idea is to laser off the white paint
leaving the black paint underneath to pop through
giving us that black and white enamel dial look.
There it is after the second coat.
Not looking bad is it?
Professional!
Now you may have seen me use this cheap little laser before on the channel
and there really isn't an accurate way to align the workpiece to be lasered
so you will have noticed that I've left the centre hole
and the sub-seconds hole on the design
so I can align it by peeking through the holes
and to do this I've lasered the design on some sticky back paper
which will be my guide to accurately position the dial.
Confirm it's dangerous
So this is it and there's no turning back now.
So as you can see due to the dial being curved on the outside
some of the olive leaves didn't come up properly
but the black has come through perfectly
but I needed to do another pass
which meant I may risk losing the black and going on to the grey primer
but I decided to do another pass
and this is the result
and to avoid making a mess of the whole thing
I've decided to call this a win.
Hopefully the bezel and crystal should cover up the edges.
I then finished it off with some clear coat matte lacquer.
What do you guys think of this so far?
I've lost the black
I was hoping to get black but it's gone on to the primer
but that should be fine
SWEEEEEET
Okay so I won't bore you with every step of this movement assembly
as we still have the case work to do
it's a very simple movement
and if you want to follow along
then check out the AORUS video as it's very similar
So in goes the mainspring
then followed by the arbor
Oil up the arbor where it comes into contact with the barrel and barrel lid
The ratchet wheel will sit at the base of the barrel
so make sure to have your arbor in the correct direction
with the square part at the bottom
Start with this stem guard
Once the stem guard is in
you can install the barrel and assemble the train
The oils you'll need are D5 or HP1300 and 9010
Don't forget to oil up and install the setting lever screw
before you stick on the train bridge
Once the bridges are on
do a bit more oiling and stick in the pin pallet and cock
Also always test the train to see that everything is nice and free
before tightening all your screws
Pallet's in
Just hurry this along now
So while I finish off the movement
let me announce the winners for the two watches I promised to give away
But before I do that
I would like to warn you all for future giveaways
not to fall for the scams
Scammers use my logo and open up YouTube accounts
and then they'll message you to say that you have won
They will then ask you to contact them through Telegram or other sites
and ask you to pay for the postage
You should all know by now
that I would never ask you for any sort of payment
The giveaway video has given me so much grief
as every day I would have to sift through all the comments
and remove the scammers
I did mention on the video
that I would announce the winners on my next restoration video
i.e. this one
So it always pays to listen carefully
and watch the full video for clear instructions
Anyway, if your username appears on the screen
contact me via email
and I will provide instructions on how to verify yourself
I am expecting only two people to email me
so scammers stay away
I will leave my email in the description
Okay, so for the titanium version first
the winner is
and for the black version
the winner is
Congratulations to both of you
That one looks like just staining a mould
so that shouldn't be too bad
Now this, I'm not sure what material it is
That looks like it's brass
but that's just an inner
Might be all brass
Let's just get it in the wash
I don't know if this is two parts
sort of this part and this part
or whatever this is
This is what's caused the reaction
because brass doesn't actually rust
So if this is a brass
then it should be a simple replating job
So instead of going for the old factory finish
whatever it was
could be nickel or chrome
I don't know
Doing this part in yellow gold
and then doing this bezel in rose gold
I would see how that goes
Something behind that
So what is that?
Well it looks kind of
I don't know
I'm not gonna guess
Just get it in the wash
So I have millions of crowns in stock
but let's try and reuse the old crown
and as you can see
the crown does have a long tube
which is functional
due to the style of tubeless top loading case
You can also plate the crown if need be
and with a couple of rubs
we can see a glimpse of a beautiful crown
waiting to emerge from its long slumber
from beneath the ashes
and you would have already seen the results
on the previous movement assembly segment
So here we are after the wash
That's the case back
Some deep staining
but that should all come out
I'm hoping
In the bezel
you can see now
that yellow gold tone
but I think it's just brass
The crystal
We polish that up
and reuse it
and then
that was brass looking
but now it's turned silver
So whatever that was on top
that was yellow
was probably the plating
So this is probably not brass
and it's probably something else
Could it be zinc or pewter
or I don't know
It's pretty horrific
but it's got a plating
which looks like nickel
So let's get rid of that coating
whatever it is
and we'll assess it after that
I think here is the best indication
as to what the original metal is
and it does not look like brass
I've never plated something like this before
and we've also got all these contours as well
You can see beneath all that
You've got the lug here
and then we've got a contour here
and then it goes off onto the side
So let's see if somehow I can keep all that
and see what we get underneath
So that's come out quite nice
Brass
There's a crystal
You can see there's a tension ring
and that's the case back
Just need to do a straight grain
and then here
I managed to redo or recreate
my own little contour
and then I'll do the rest of it by hand
So this thing metal is absolutely nasty
I've given this a quick buff
but if you look here
looks like there's almost a hole in it
So I don't know what to do with that really
So look at that
I've just washed this thing
and it's gone all mouldy again
What in the actual...
What kind of metal is this bro?
Madness
So how am I going to do anything
without washing this thing?
Shall we go for a rat look?
Okay so I've polished it again
and I think in order to get rid of that hole
I might have to give up on the idea of having contours
and just round everything up
because the more the deeper I go
more holes seem to be popping up everywhere
like this one
I'm going to wash this in some L&R solution this time
without touching it with water
and then cool it a day
and just plate the bloody thing
So I'll put it in here
some cleaning solution
more stick than the ultrasonic
Let's turn to mould again
Oh yeah
Behaved itself this time
Good
Now I'll give it one more clean
clean solution
and the brass bezel as well
and avoid water completely
You can see how dirty that is
and that is ready to plate
and then if I put any gold onto that case directly
it's going to turn into dog doo-doo
so I'm going to nickel the heck out of it
and see if I can add some nickel into that
into all those little pits and holes
I'll put the heater on
I don't think this thing is working
the copper wire is plating
but I don't know if the case is plating
this is fake metal
it's working
because you can see all that
just from the water in the solution
it's turned it mouldy again
as you can see
it's kind of dull
and that's just probably just from the water
that's in the solution
so any sort of water
seems to react with this thing violently
but I'm going to plate it some more
I've had this thing for nearly an hour now
and I think it's leveling itself out
but the finish looks horrible
but the dull parts have gone
I think I'll leave it in there for another 10 minutes
and see how it goes
that looks like doo-doo
so I increased the voltage
to try and level out some of those pits and stuff
and now you can see it's gone really dull
it's filled in all those pits and stuff
because nickel has this self-leveling property
nickel plating
all right so I've been at it for a couple of hours now
and as you can see
I'm thinking of maybe just plating it in this dull state
so I decided to dial it up again
and plated it
and I'm going to bed now
I've had enough
now this I want to do in rose gold
to give us a little contrast
so I didn't do a voiceover during the polishing and plating
so that you could hear the ups and downs
and disappointment in my voice
I'm not that satisfied with this case
but I don't know what else to do with it
but I have a few more ideas that I'd like to try
so if I do decide to try something else
you can follow the progress of this piece
on my new website
where it might turn up for sale in its new form
also a big shout out to Omnisa limited
for doing my website
so check them out
and I'll leave their link in the description
so I hope you've all enjoyed this episode
if you did
then please like share and subscribe
as YouTube and I have had a lover's tiff
over our political differences
so she's got the hump
and no longer telling her friends about me
moody s**t
as we've discussed earlier
someone really loved this watch
and fought to keep it alive
but after inspecting the service marks
the last service mark was dated to around the 1980s
so at that point
quartz watches were running the show
so this watch was no longer worthy
as it may have just been cheaper to buy a quartz watch
than to get it serviced
so the watch was left to wither away and die slowly
all things come to an end I suppose
and so did the love for this watch
sad and gloomy end
but wait
now with a totally new look
and the mark of resistance on its face
this watch has been rescued from the rubble
and I shall be wearing it myself
and fighting for it
to help it rebuild a new life
and feel wanted again
take care folks
look after yourselves
and take care of each other
keep talking
keep fighting
keep protesting
keep boycotting for justice
Rome didn't fall in a day
peace
love
and blessings to you all
ta-ra
