S&S Precision: Plate Frame - Redux, Load Bearing Wings, Comfort Foam, and Rapid Attachment Panel

Ballistic Lab
1 follower
Dec 20, 2025
S&S Precision: Plate Frame - Redux, Load Bearing Wings, Comfort Foam, and Rapid Attachment Panel
Alright, hey guys, I got a feeling this one's gonna be tricky to keep on
In view and I apologize ahead of time for that. So
Viewer reached out to me and asked if I wanted to check out a plate frame. I was like heck
Yeah, the only plate frame I have any experience with
Especially in person is the Hunger Games plate frame, which isn't bad
But it's it's pretty clearly not the full capability of SNS precision
So when he said that I was like, yep, let's let's do it I'd love to and he told me it was the the plate frame
redo and
It didn't mean anything to me at the time I didn't know what it was
I didn't realize how many different plate frames SNS precision sells
but either way, I was excited I got it and
checked it out on the website to try to get it all put together and everything and
It's like they're I don't want to say budget option because they don't really make anything budget-friendly
But I think it retails at $400. Okay, I looked and and I should have gone back and checked so I apologize
There are some things on here that are not stock
I'll try to go through that without messing up his setup too much as we go through. So the plate frame redo
from SNS precision
He asked me if I had swimmer cut plates. I said yes, I do so he didn't send me
Armor put mine in there the fit. I think it's the right fit. I might have slightly different sized
swimmer cut
But I actually was so excited about this when I got it and tried it and was messing around with it
I went to the website to look at building one for myself
Or buying one and you know all the pieces and whatnot. I didn't build anything and there's lots of options for
Plate cut so you can get sappy cut versions swimmer cut all the different sizes
I think they even have some more obscure cuts so you can do that for sure
So you're not restricted just to swimmer cut plates, which is exciting because it kind of opens it up to more people, right?
So some of the pieces that are not stock on here. So there's this rapid attach
Half panel. We'll take that off as we go through so you guys can see how that works
I just I got it together and I didn't want to mess anything up and then there's load-bearing wings
So they come in pairs. You can't see the other one here, but there's two there show you how those attach
There's no directions on those. So it was a little confused. I might have done it wrong
This goofy pocket over here
I didn't realize what it was at first until I went and started playing around the website to see what I might want
It's actually a holster
And it's kind of interesting. I don't necessarily know that I'm a fan of it, but I do like what they did with it
It's a neat way of doing a holster
It's not weapon light friendly. So that kind of kills the appeal to me
But if you don't want a weapon light, it's it's an interesting setup
The shoulder pads here are obviously not stock. Those are core ice vents and then the hydration system doesn't come with it
looking internal
This pad does not come with it. It's like a $25 add-on, which is a crazy good deal from SNS precision
It actually helps out a lot. It's this thing is crazy comfortable for what it is
That was kind of though my biggest drawback when I would look at plate frames is they don't look comfortable
At all. This one is actually surprisingly comfortable, which is what led me to go see
What getting into one of these would entail?
And then there's a pouch on the back here. That's obviously not
Stock item. I don't know. Sorry about that. I don't know who makes that pouch. I don't recognize the logo. It might actually be
one of the SNS
Precision pouches like their watershed line. I'm not sure
Interesting little bladder pocket there and then I think this is the spiritus
Like flag thing. I'm not sure that's obviously not stock as well
So, you know kind of keeping in mind what's not stock should be fairly obvious
When you go on the website you pick your plate size and then they ask you to pick your cummerbund size
The cummerbund sizing is done by channels. So this is a six channel cummerbund
Sorry, these are also not stock. These are the the axle
cummerbund or
placard adapter things
So you pick how many columns you want on your cummerbund?
And that's like your general sizing and then it does have a rapid adjustment
Inside of this wrap, which I'll show you as we go through it. So that's kind of one of the other reasons
I didn't jump on it one. I'm not totally sold on wanting to drop that much money right now on a plate carrier
But I'm also not sure how to kind of game the sizing
Because I'd like to have the capability to use side armor
And I'm not I'm not sure how I feel about that on here
What what that would add to the sizing and whatnot this fits me as is pretty well, but that's without
internal radios too, so
Sizing is a little up in the air. I'd have to do some some more
Calculation on that if you will
All right
So looking at how this thing works, right
The cummerbund is really the most interesting part of the the plate carrier itself
but the accessories are also kind of cool and
Once you're into the the initial cost of the system the accessories aren't terribly bad
Especially with respect to S&S precision pricing
So we'll start kind of taking this apart piece by piece and see what we get to
Also before we get too far ahead of ourselves, I do believe this is their toad vine colorway
It's ranger green churched up a little bit
But they have kind of the basics
They've got black coyote toad vine and then multi cam for color options, which is another reason why I'm not totally sold
I've got all of those colorways
Covered I don't necessarily need a new plate carrier
So if they had some spicy color option that was unique, maybe I'd be more inclined
All right, so we'll start taking this apart so this rapid attach panel is
kind of the
SNS precision
Attempt at a placard, right
So we free up the bottom here
You will see the the side release buckles. Those are not stock
So this kind of mimics what you could get out of a placard and then there are some side
Velcro panels here
And SNS is kind of known for their their velcro
Origami when you're putting this stuff together
Which is why these pads come into play so much
All right. So we got bottom velcro side velcro undone
You can see we really didn't have to mess with too much to make that happen
The only thing that might potentially be in your way is if you had some comms routing going through the laser cut molly
That could slow you down a lot
So the last thing here is these Tegris tabs just slide out
Right there. They've got some velcro that could potentially engage with something inside. I didn't have it hooked up to anything
I don't know if that would be the the plate socks, which I don't have
But maybe that's where that velcro would engage
but
The Tegris is there for kind of the strength of the system and then all the velcro keeps it in place
So just that fast we could have swapped from five five six to seven six two
Or you know a not ammo setup, whatever's going on, you know, or we had ammo
Maybe we don't need it. We just ditch the panel and now we've got a slick front
All right. So that is how we get the the rapid attach panel off
Uh next up I think we'll take these load bearing wings off so we can see how that works
These are the most confusing part in my opinion
S&S has directions for some of their stuff, but they did not for these. So, let's see if I can keep this on camera
effectively
All right
I think that'll work
So again, you kind of use the pads to clean up all of the different velcro layers going on
So we'll take that off and then you can see we've got our two
Uh load bearing panels here. They are separate but they are sold in pairs
Uh, and I think that gives you the flexibility so that they're uh
One size fits all as far as plates go so you can move them out as needed
you can't really
Uh at least as far as I understand it adjust
the spread
um
Within the same plate size like this is where they're going to be on
This particular plate carrier if you stepped up in size
They would be in the same spot just spread out a little bit more on that plate
You can't you can't get more spread on the same size plate if that's something that you want
so these velcro tabs here
Connect the two panels together and then they've got these kind of chunkier pads here which engage with the inside of the plate carrier
The last piece that engages with the plate carrier is this tegras tab here which goes into this elastic piece
That's kind of the one part that i'm really guessing on when I assemble these
I think I found one picture on the internet that showed that and the that was it
As far as how to assemble this and install it
So i'm assuming that's what the tab engages and that's kind of why you can't really adjust sizing like it's just there
And then that's where your molly is. It does clear the plate, but only just barely
Uh, if I had you know, if I had the power to make things happen
Uh, I would push this molly out at least another half inch I think just to really clear that plate better
All right
Since we're here. We'll look at this holster again
It took me a little while to figure out what this thing was
Because it's very flat. It's like what in the world would even fit in there and then the offset bungee was throwing me off
And there was this goofy tegras piece in the box
So what that thing is if you can see in here
There's almost like columns of molly
Uh, so you have three
Areas where you can drop that piece in there
And uh, we'll hopefully get it out here in just a minute to show you how it fits in there
but that is kind of your trigger guard, uh, if you will, so
Uh the way this works. We've got that offset here, uh to the left right now
uh, so when we take our
Glock and insert it into the pocket
The trigger guard catches on that tegras piece and then your barrel and the rest of the slide fits down beside it
Uh, I don't know
How big of a worm and fuzzy I get like there's the trigger
Uh, just kind of hanging out
Uh, the bungee's on the wrong side
So forgive me it should route that over the top of the slide and you can kind of see how that would function there
again, uh
I don't know. That's not the safest holster ever made
Uh, but it is a holster
And if you have a pistol with a safety i'd feel much more inclined to use that
but again, it's not weapon light friendly, so
Kind of not not my jam, uh from the get-go. Uh, but as far as this tegras piece
May or may not cooperate with me getting it out here
All right, so there's half of it out
And the other half
Maybe there we go. So that's how your tegras piece is shaped
Uh, so those little teeth they slide into
The molly channel there and then when they get to the top they kind of spread out and they keep it from popping back out
uh
Kind of interesting. I don't know
again, it's
It's sns precision. Somebody asked for it. Uh
Not necessarily myself
So we will just uh plop this back in here so I don't lose it before I send it back to this guy
All right
Uh, so yeah
As far as the load bearing panels go
Fairly affordable. I think these are thirty dollars a pair somewhere close to that. I can see it's all tegras with some velcro on it
Uh, you get two of them
And uh, you can use these front and back of the plate carrier
Um, I don't necessarily know what I would want to put in the back. Um, but you've got the option, right?
the uh
the foam backers here
Are fairly minimal as far as their padding ability goes, but they do kind of cover all of the velcro connections inside there
Which is nice, uh to have just to keep things cleaned up a little bit
And um, they work they work really well. This thing was surprisingly comfortable
Uh, it's also very lightweight. So like don't let this massive velcro
Uh concern you too much
The total plate carrier, you know without plates I think they mark it as being right at a pound
All right, so we'll take those out of the way
just uh
So you guys can see how the plates drop in here
All right now i've got this kind of contorted with the shoulder straps so it might not
Give you the best view here
But you've got this crisscross coming around the the angle of the plate and then you've got a flap coming over the top
So you undo those two?
And then you undo your flap here
And that frees up the plate to either drop in or come out of the the pocket
Uh, but it's a little a little wonky. So this flap is on the front of the plate bag
And this is the inside of the plate bag
And then you've got this elastic band that runs around so it's fairly secure in there
um, it's just kind of like a
Like a burrito holding the plate in there and when you flip the the plate carrier inside out it gets a little wonky
So I don't want to take that take that all the way out just yet and uh
I'll lose the structure to show you guys the rest of this thing
All right
The plate the cummerbund attaches with these buckles that i'm not overly familiar with
On the front of the plate carrier here
I don't know if that's a an sns in-house contracted buckle or whatnot
Uh, but it snaps in there. It's got a nice audible click when it's there
You know, it's secured and then it's just a simple push to to free it
So they work pretty well. And uh that that button is fairly recessed in there
Like I don't think you'd have too many concerns with that
Pressing itself, you know with your with your rifle or some other piece of kit or something
And then when we look at how the cummerbund attaches here
It's pretty slick. They've got this
It's not a very big piece of tegris, but it's sewn into the corner of the plate bag here and riveted there
Uh, and then that's just kind of like a
A wing on there. Uh, so it keeps your angle kind of fixed
You don't necessarily have the most control over what the uh, the cummerbund is doing
Uh, but there it is
and then for sizing see here
Mess this up too much here
Uh, you've got this sleeve with the molly on it that kind of conceals everything. So we'll open that up
Very good velcro continuity. I remember chewing up my fingers a good bit
working on this
All right, so we open up that velcro there
And that kind of frees our sleeve. Although it is still
You've got these these tabs on the end here. Hopefully that's still in view that kind of fits between that channel there
so that's what's holding our uh
cummerbund on there and you know now that I look at it
I don't know if the um
I don't know if the cummerbund itself changes sizes
As you uh as you go through the different options on the website it might only be the fabric panel
Uh, but i'd have to check on that. I really don't know
I didn't think that I didn't even think about that because I looked at how this all went together
And then a couple days later I went on the website to kind of piece it out
And I had kind of forgotten how this looks at the time. So
What you've got with this big old massive tegras and shock cord and rivets and everything that's concealed under here
Is you have the shock cord with this kind of tegras tensioner there
So if we pull this all the way out, so we have all the slack possible
and then we
Bring that on to the inside here. You can see that we can actually pull that cummerbund
all that distance
so
when i'm looking at that, I think that if you if
If you got the wrong size cummerbund, right?
Worst case you could probably still fit over soft armor
And a radio maybe not both at the same time
And and still have it secured
Uh, you would just miss out on some molly
channels on the the outer face
so
Hopefully that's that's coming through and you guys can see how that's working. All right
Uh, you've got kind of this
Man, there's a there's a lot going on here
It's just not going to show up very well
Uh, but there's a whole mess of shock cord to keep tension there and then there's like a almost like tegras rails
That the cummerbund slides on
And helps with the adjustment so you can see as we as we take tension or make tension in it the whole
Fabric portion slides towards the front of the vest. So you're really just losing, uh molly on the back
Isn't a crazy big deal
Now that I have thoroughly messed up the sizing on this guy's cummerbund we will uh,
Secure this back up
There you have it. That is the uh
the
S&S precision plate frame redo
Uh, it is a little bit different than kind of what you think of when you look at a plate frame
because the
The frame itself is all fabric as opposed to kind of the kydex type material that that I think we normally think of
when we think of plate frames
I don't think that's a
loss though
Right, like you still have you still have molly
Uh, it's quieter. It's it's an inherently a quieter vest
Uh, the cummerbund is definitely unique
Um, it is it does get a little bulky up here right around the buckle like that might be a concern
As you're you know going over top of radios or something
But it's a structured cummerbund like this thing
Functionally is very similar to an spc
or a uh faro with the the tegras cummerbund these buckles
are relatively fixed like when we
Attach this here
There's not a ton of movement there especially with that that tegras wing on the back like
It's staying where it's supposed to so you could load down the cummerbund. It's not going to sag
It definitely takes some weight off of the shoulders
Granted it has the the core ice fence on there
Uh, but I didn't notice any issues with comfort in the shoulder. It looks like it's kind of a cry style attachment here
Um, i'm sorry, I neglected to show you guys how the shoulder straps go together
But it's uh, it's just two straps with a velcro marrying it up underneath of this, uh wrap here the wrap is stock
Um, so you just you know find where you want your your shoulder straps push the wrap
One direction or the other to keep it out of the way marry up your shoulder straps and then pull it back over
So there is a good bit of sizing available there
Uh this one I I put it on and it was already at the correct height
So I didn't I didn't worry about that too much
Neither of them are adjustable at all, which is totally fine in my boat
Um, not something that I really look for and you do have a drag handle on the back
Uh, if you want to call it that it seems
It's stitched into the the rear panel here pretty well
uh
but drag handles are always kind of hit or miss as far as will the stitching hold or not because that's a
Pretty big dynamic load that you're going to put on it
Um, so quick release ability of this, uh, you can pop the cummerbund real easy
Getting the shoulder straps off might be a challenge, but you've got a good
Good clean shot there with a seat belt cutter or something if you really needed to get this off of somebody
um
It's an interesting interesting thing. It's definitely one of the more affordable options that sns precision has
starting at 400
with fairly priced accessories, I think the
The half panel here might be 40
Uh, your pads I think are 25 for the whole set
and then uh, your
Your load carriage wings are 25 or 30 for a pair the holster. I don't know how much that costs
their pouches are
Exuberantly expensive so i'm not i'm not too worried about that
Um, you know, it's molly compatible. You don't have to stick with proprietary
sns precision stuff
So you can definitely explore other molly options, but yeah, there you go
It is it is very comfortable very lightweight. It's structured which is a win
Uh molly compatible kind of placard compatible aftermarket for sure is uh, granted. You don't have the velcro there
which is probably why
this guy has the the axle, uh
side buckle adapters on there, but
Appreciate your time guys. Hopefully I didn't ramble too much
It's kind of difficult to piece some of this stuff together live for you
But hopefully showed you how it works and and answered some questions since sns doesn't have the best, uh
Informational material on the website. It's pretty bare if you're asking me
So if you're spending 1200 on the the high-end plate frame just you know
You may have to figure out how to assemble it on your own. All right. Thanks guys
