How To Throw A Vase With A Tall Skinny Neck

Ceramic Art Studio
35 followers
Dec 17, 2025
Hey everybody, welcome back. I hope you're doing well today. Today we're going to talk about how
to make tall skinny necks on a vase like that. I know it's not an easy task, especially when
you first start making pots, but man do they look good. Let's go. All right guys, I'm going to do my
best to explain how to do this because I'll be honest with you, I would say the majority
of what it takes to learn how to do this is just hours and hours and hours and hours
of practice and pounds and pounds and pounds of clay. Most of you know that and understand that
and that's good, but still there's probably a couple things that I could share that might be
able to help you with that. Things that I've learned along the way in the past 27 years of
making pots that would help you all understand and know how to do that. So that's what today's
video is about. I hope it's going to help you and I hope you learned something, but I was throwing
some vases yesterday, some small vases, and I threw this one this afternoon and I thought man
this clay is just working really well for me right now and these vases are looking
really nice. So I thought you know what, let's make a video and talk about how to make
tall skinny necks on a vase like this and I will say the first thing that comes to mind or
one of the things that I thought of yesterday when I was making these is I was making various
shapes of vases. Some with a lot bigger bottom and some with you know smaller you know round
still rounded but leaving more clay at the top for the neck and I will say that one of the biggest
issues I've ever noticed in myself was the perception issue and that was what I mean by
that is that my perceived idea of how much I needed to push out the clay and how big of a
belly that I needed to make on a piece as I'm making it before you make the neck and the top.
That was one of my biggest challenges because a lot of times when you're when you're making the
belly on a piece your perception of how big that needs to be is not appropriate because you
haven't made that top yet and you haven't you don't know exactly how much clay to leave to
make a good proportion pot and I mean you can make a proportion of a pot of any kind of proportion of
belly and neck and all that but there are certain ones that I think look better than others and so
in my goal or my in my chasing after the perfect pot which never happens but in my in my goal of
trying to accomplish the shapes that I want there are certain proportions of a belly and a neck and
a top that I want to achieve and at times I've had a problem or or not a problem but at times I've had
a misconception about how much to leave in either the top or the bottom get the shape that I want
that's what I'm trying to say so as I as we do this I want you to think about that or next time
you're throwing uh think about that think about maybe not putting as much uh of a belly on a piece
and then make the top and just kind of see how it goes and feel it out for your own self
and uh and you may not have that problem with the perception but I'm assuming that if I did
there are lots of other people that have and do have that issue and you may not realize it because
a lot of times we don't know what we don't know right so uh anyway so I'm going to start throwing
some of these but I thought before I did that I wanted to talk about that uh the other thing that
I would say is that as I'm making these these are one pound vases I I pull the clay but I don't pull
the clay as much as I could you know I'm saying like if I was just making a straight sided tea
glass I could pull the cylinder a lot taller than I'm gonna pull here in just a minute to make one
of these vases and that's because if I'm gonna belly this out I need a little bit more clay there
in order to stretch that out and make that shape without making it too weak your main weak point
in a base like this is this area right in here right below that neck right where that comes in
the smallest and because of the weight of this on top of that belly if you make this too weak right
in that spot right there you're going to have a problem every single time getting that neck smaller
uh because it's going to want to collapse or buckle right there and you can have that issue
uh the other thing that you'll have an issue of mainly I've seen an issue in myself and others
is that if you don't leave enough clay in this top part here as you close that in and neck it in
you're uh you're the top is going to want to buckle the thicker that clay is up there now it
can be too thick but if you leave a little bit more clay in that top portion as you're pulling
and then you shape the bottom and then you want to squeeze that in you're going to have a better
chance of that not buckling uh as well as the other thing that will help it not buckle is to
center the clay really well make sure it's good and running true and then as you pull try not to
pull it out of center and shape and try not to shape it and get it out of center because if you
get it out of center at any point and then you try to close that top in that wobble is going
to get worse and worse as you compact that clay down into a smaller neck so I know there's a lot
of tips there in one little section but we're going to see those fleshed out here in just a
second as I start throwing more of these and uh and talking through and I might just make a couple
here and then we'll come back and talk about some details after I make a couple of these vases and
you can watch that all right here we go we're going to walk through the steps of what I was
doing in those last couple that you just saw and I don't think I need to explain the first step of
centering the clay ball other than what I said at the very beginning about making sure that it was
centered very well and uh I mean you should throw everything centered very well but
there are certain shapes that you can get away with it not being centered quite as well
and as far as opening nothing special there other than the size of the bottom you don't
want to make it too wide if you want to make a small base on the pot that you're making
like I said one of the first tips comes into place when I did that first pull there you can
see I left a good thickness I probably have you know a good uh quarter of an inch of thickness
there at the top go ahead and clean the excess water out of the bottom now I'm going to do my
first pull from the base I'm going to be pretty aggressive with the pull at the bottom and then
gradually light up lighten up as I get towards the top so that I continue to pull all the way
through but I'm not pulling nearly as much clay out of the top half as I am the bottom because
most of that clay that I want to get evened out is in the bottom anyways and do the same thing
one more time and I'm going to push in and be way more aggressive at the base and then
lighten up for the probably top three quarters I'm going to continue that pull all the way
through and maybe pull a little bit but not much for that top three quarters
and then I'm going to start the shaping by cutting away that excess clay you saw my recent video
about making a foot on the bottom of a pot that uh I'm going to do the same steps right here that
I did in that video start by making the base of that about the size that I want my foot
push in and leave make that extra clay protrude out there to make the foot with
round that foot clean up around that all right now we're going to start doing the shape
and this is where I say that the perception of how big this belly needs to be can be difficult
because you sometimes my my tendency was to make this belly way bigger than it needed to be and
then I didn't have enough clay for the top or the neck and it's only because you haven't closed
in that top yet that you can't really tell sometimes how how wide you need to make that
bottom but after you make a few and then you get the size that you want you can work off of that
memory of okay I don't need to push any more than that to get the size that you want I guess I went
ahead and jumped ahead a little bit and it didn't explain what I was doing there but we'll get that
on the next one pulling that up so I can cut that little bit of wobble off the top I'm going to use
my tool to make sure I got a good round shape right on this top part of the shoulder there
all right once I got that add a little bit more water right up in here and then I'm going to pull
this neck one more time or at least shape it more than pull it there we go all right I'll uh
switch angles and then we'll at least walk through the steps of at least one more
and then uh see where to go from there all right here we go with a another vase from a different
angle this clay ball has a little bit of air in it I can feel it already so I'm going to try to
get that out before I continue now we're going to re-center that's one thing that will definitely
throw off your base if you have a little bit of air in the clay that's going to make it not pull
evenly make it hard to center and that you know there's a chance that I didn't get it all out it
might show up again here in just a minute we'll find out yeah I can feel a little spot right there
on the inside there's a couple on the outside right there all right we'll see this could affect
it in the long run and if it does you guys might get to see me flop another one I think you guys
enjoyed that in that previous video way too much and the top's a little uneven already just from
that uh just from those air bubbles but I think I can still work with it so I'm going to cut away
that extra clay and make my foot all right now we get to the neck I'll explain this a little bit
more what I normally do with the neck is um start by wetting the clay dipping my sponge in the water
wet the clay down to where I want to neck it in I don't want to add water to the whole thing I
definitely don't want to get water on the inside because I'm going to make this too small to even
get a sponge on a stick back in there so I'm just going to wet the clay down to there and then I'll
start by squeezing in collaring my hands together and uh and pinching that in you don't want to do
too much at one time either because then you're going to buckle the top so you can see I gradually
pinch that in I went from you know this big around to that big around then I'm going to go a little
bit more add a little more water usually after this second one there you can see it's got a
little bit of a buckle in it that's from earlier like I said with that clay having air in it I'm
going to go ahead and see where that sharp angle is right on that shoulder I want to go ahead and
round that off now well before I finish closing that off that helps me keep the shape and also
keep the integrity of the piece that's a little more important when you get the larger sizes
not to create sharp edges there because the more weight you have on top the more chance that has of
collapsing but it's just a good practice in general I'm going to go ahead and cut this off
because it's already a bad enough wobble I'm sure I'll have to cut it again based on the
the wobble that's in that neck already but if I do it now and then do it again later that helps me
keep it more even all right so now I got that pretty skinny and I can come back
now and pull it this I'm doing more pulling with my left hand than my right hand you can
see there I was kind of following it with this hand but I was doing more pulling between these
fingers here than I was with my index finger like I normally do just because of the size and the
shape of the neck I could do that but now I'm going to be shaping with my right hand supported
on the inside with my left yeah I don't think I'm going to have to cut that again that's good
you're going to want to check that shoulder again make sure I get a
nice even shape up through there hopefully my head wasn't blocking that view of me doing that
all right let's do one more hopefully it doesn't have an air bubble in it
another thing that will help you uh tremendously with making uh any pot really is to have really
consistent clay whether it be softer or stiffer if you got really consistent clay it's one thing
I love about having a pug mill is that I can have fresh pugged clay even if it comes out of a bag
it has been pugged and de-aired but if it's been sitting in that bag for a couple months
it's probably has some hard and soft spots so having a pug mill is a great way to even that
up or you can hand wedge it if you don't have a pug mill but either way having that consistent
clay is a big benefit to making anything with a delicate shape then it's a lot easier to center
a lot easier to pull consistently without having those hard and soft spots mess you mess up your
fluid motion no air in this one so far that's good as you can see there I'm gonna center and
each time after I finish pulling you can see me kind of work on that top there a little bit
recenter it kind of compress it just a little bit just to kind of help me keep it steady
because I know I'm going to want to work on that top quite a bit and keeping that
steady is a big key like I said all right I'm going to add water just to that top portion there
start squeezing that in I'm going to do that gradually start at the base come up follow all
the way through even if there's a little bit of a wobble add more water just to that top portion
there squeeze it in follow it all the way through even if it starts to wobble a little bit like that
okay one of the things that I've learned as far as cutting off the top of a piece you definitely
want to I prefer a needle tool and you definitely want to get it wet so that way as you're pushing
the needle tool in it doesn't drag on the clay you're pushing some of that water into that spot
and then once you're done cutting through just lift up if you do that dry that needle tool and
that clay is going to drag and it's going to cause a problem all right I'm going to pinch in a little
bit more right at the base and pull up now I want to work on this shoulder you can see the shape
there is not quite rounded like I would like so before I finish shaping that neck I want to work
on this shoulder and now I can come back and shape the neck all right guys well there you have it we
made several small vases with that tall skinny neck and I tried to share everything I could
think of that would help you in the process of making those maybe some things to do some things
not to do and you can see not all of them that are that shape I made some last night that are
more bulbous and round and squatty but today I was inspired to make this shape and so I thought
I would share with you guys some tips on how to make those and one of the only other things I
thought of that I didn't say is that as these pots get larger and larger say if you want to make it
two and three and four pounds it gets a lot harder even for me with all the experience I have
so if you want to learn to make this shape start with half a pound or three quarters or one pound
and work on the techniques of making those and then try to move up it does get a whole lot more
difficult when it gets more clay because the top of that vase is going to weigh more and more
and then that shoulder still got to support all that weight that's bearing down on that skinny
neck so anyway like I said I hope this helped you guys I hope it inspired you and if it did
leave a like on the video leave a comment and subscribe to the channel if you haven't before
you leave and I hope you guys have a great day and we'll see you in the next video thanks bye
all right just for fun maybe we'll do this as a bonus clip at the end after I said goodbye we're
gonna see how extreme I can get so I might fast forward through the beginning part just see how
tall and how skinny I can make that neck who knows it might be ugly but just to see
