This Engine USES 8 CYCLES TO RUN?!? 100-YEAR-OLD WINDMILL Engine Revival! Can We Get it Running??

Screw Driver
87 followers
#machinery #motorbikes #occupations #career
This Engine USES 8 CYCLES TO RUN?!? 100-YEAR-OLD WINDMILL Engine Revival! Can We Get it Running??
You guys have heard of two cycles and you guys have heard of four cycles,
but have you ever heard of an eight cycle engine?
This is a 1900s to 1910 Aeromotor eight cycle hit and miss gas engine.
In today's video we're going to see if we can get it running,
do some work to it, and explain to you guys how it works.
Stick around to see how things go and I hope you guys enjoy.
Let's get right into it.
I picked this engine up last fall at a swap meet for a pretty good price
and I figured it'd make a pretty nice video as well as I've always kind of wanted to mess with one.
Overall this engine is in need of repair and has some issues and somebody has repainted it.
It comes with a homemade two-wheeled cart and every component I need to make it run.
So in today's video we'll see if we can do just that.
I'm going to take it apart, clean it up,
put it back together and see how well it runs in the end.
The first issue to tackle is when you turn it over you can hear there's a compression leak
coming out of the igniter and valve body.
So that's what we're going to tackle first.
If you have any questions or any information on this engine
feel free to leave a comment down below.
They greatly help the channel and I respond to all of them and I greatly appreciate it.
There's one part on this engine missing that I had to find separately.
That is the final drive pump jack gear.
I ended up picking a parts engine up last fall as well and it has the gear that I need.
So let's get it apart.
After getting it all back together and I'm thinking I was done with it,
I decided after looking at it that I didn't really like the look of
the repainted gear with the original gear.
So I went off to take off that
and I decided to do a bunch of other work to it while I had it all apart.
Now I got the engine all the way back together and I've got it running really good.
I think it's time for me to explain exactly how an eight cycle engine works.
This engine was originally designed to pump wells when there's no wind
for an air motor windmill to pump water with.
They wanted it to be cheap, simple to operate and low maintenance.
One of the ways they did this is they decided to make it air cooled.
But in most air cools you'd need a fan for cooling
and some kind of shrouding to keep it on the cylinder to help keep it cool.
The way they worked around this on this engine is they designed it in a way
that it has two extra exhaust cycles to allow more cold air in the cylinder
and to be blown out allowing it to take more heat out of it
without any kind of extra moving components.
That's basically all the eight cycle is for
and it also kind of doubles down as an extra bit of reduction for the final drive
as your cam gear is your secondary gear and gear reduction for the water pump.
That's enough of me talking though.
I'm going to let you guys enjoy some of the sounds of this engine
as it's a wonderful sounding little engine
and then I'll get back to you in a little bit.
Please enjoy.
One of the benefits of being an eight cycle for us nowadays
is it allows it to coast for a nice smooth long period.
As you can see here the cam lobe is way longer than most engines are
and that allows it to have a lot less mechanical noise than most engines do.
I really like the sound of one of these when it's properly
tuned up and slowed down and I hope you guys enjoy it just as much as I do.
I'm pretty happy with how it turned out.
I hope you guys enjoyed.
If you liked the video leave a like down below.
If you didn't I don't think you would have made it this far.
If you have anything you want to ask please leave a comment down below.
They greatly help the channel
or if you have any information on this engine also leave a comment down below.
I respond to all of them with time and I really appreciate all of them.
That being said glad you guys sticked around.
I hope you enjoyed and I'll see you in the next video.
Have a nice day!
