JTACtical Solutions: J_Hook ( A G-hook or Side Release Buckle replacement)

Ballistic Lab
1 follower
Dec 11, 2025
JTACtical Solutions: J_Hook ( A G-hook or Side Release Buckle replacement)
Alright guys, bear with me on this one. I'm gonna try something different. So I like simplicity in videos
I try my best to do one product per video
Because I think it's just easier to find that way and a little bit more digestible when you're doing research. So
That said I'm gonna do one intro video and I'm gonna reuse it a couple of times here
So we're gonna be looking at J tactical solutions products. So first up we're not first up
But one of the items is gonna be the the j-hook which is kind of a g-hook side release buckle replacement
Which is crazy low profile because it's Tegris and then we've got their
Double column Molly add-on and their single column Molly add-on a little bit different features in both of those
Show you how they work
Their tuckable Molly platform, which is pretty innovative product not
Not the most
Widely usable anymore
but if you have a vest that this works on pretty slick solution and then
Lastly will be their new
Placard system, which is kind of unique
maybe a little bit too much modularity for your taste and potentially mine, but pretty cool setup and
It leaves a lot of room open for figuring out how to use it
So with that said introduced all the products, so if you watch any of these other videos, I apologize
You're gonna see the same intro again
But we'll do one product at a time and then that'll be all you have to deal with for this video. All right. Thanks guys
All right. Yeah, this is this is gonna sound silly
But this is the the J tactical solutions product that I was most excited to check out
Every time he posts something about this I share it because I think it's genius
And every time I share it I get at least one person that reaches out to me saying that there's no way these are
strong enough to
support a placard
in a worst-case situation
Which I don't necessarily think is wrong, but I wanted to try it firsthand
So as you can see, I got a bunch of these so if I break one, no worries
And I didn't tell him what I was having him make this for but I asked him I forgot I'd given away on my webbing
So I asked him to make a couple lengths of webbing with a pull handle on each end so
What this is is a J hook
Which is his his name
And it is a replacement for G hooks or side release buckles when mounting placards
so
We'll just use this
placard here as an example, we could replace our side release buckle our field repairable buckle with this and
Then we could field repair this on to our plate carrier
It would not be true quick release at that point like placards usually are but these are not too hard to fish on and off
From either end. All right, if you've got something like this shawl, that's adjustable
You can just feed it through there and it's almost as fast as using a side release buckle
All right
But as you can see
incredibly minimal bulk there
So any issues with clearing mags or having push to talks above it or something like that is kind of negated
When you use these things
right, so I
Jtechtoolsolutions has also got in the comments that these might not be strong enough if for whatever reason the velcro
Securing the placard ceased to exist and you caught something and all of the sheer force was on this
So he posted a video a while back with
Some weights
Hanging from this a lot of weight. I think it was like 60 pounds or something like that
And it was it was just fine
So I shared that and then the complaint I got was well, that's a static load. What about a dynamic load?
So what I'm gonna try to do here is I'm gonna try my best on camera to break this thing
I'm gonna get critiques
That I didn't put enough effort into this and I didn't go until
Failure, but we'll see what happens. So I'm gonna try not to lose this off-camera here and make myself look like a dummy
But let's see here
I would say that that is
plenty strong
to secure a placard
All right, I think
about the only
realistic way to put more
shearing force on that would be if you were climbing something and
For whatever reason your placard got snagged and you felt like for real fell
So your body weight was actually on it. So I am
Pulling that and jerking that as hard as I possibly can and let's take a look at what that looks like
And I can't even I can't see
anything on there
To imply that that is gonna give out anytime soon. I actually had to make these straps
Because I was concerned that if I put it on like a plate carrier and placard and tried to throw it around or something
That I would destroy the plate carrier or the placard
Before the g-hook, which I honestly think is the case. I think stitching is gonna pop before this gives out
If you guys don't think that's enough of a test, let me know I'll try to come up with something stronger
So that we can really shock that thing, but I'm not sure what it would be without just being wildly unrealistic. So
Thanks for checking this out. Definitely give these things a look. They're dirt cheap and
Can really eliminate some bulk on the front of your plate carrier if you're not
Swapping out your your placards on the regular. All right. Thanks guys
