JTACtical Solutions: Elastic Mag Placard and MOLLE Wrap

Ballistic Lab
1 follower
Dec 10, 2025
JTACtical Solutions: Elastic Mag Placard and MOLLE Wrap
Alright guys, bear with me on this one. I'm gonna try something different. So I like simplicity in videos
I try my best to do one product per video
Because I think it's just easier to find that way and a little bit more digestible when you're doing research. So
That said I'm gonna do one intro video and I'm gonna reuse it a couple of times here
So we're gonna be looking at J tactical solutions products. So first up we're not first up
But one of the items is gonna be the the j-hook which is kind of a g-hook side release buckle replacement
Which is crazy low profile because it's Tegris and then we've got their
Double column Molly add-on and their single column Molly add-on a little bit different features in both of those
Show you how they work
Their tuckable Molly platform, which is pretty innovative product not
Not the most
Widely usable anymore
but if you have a vest that this works on pretty slick solution and then
Lastly will be their new
Placard system, which is kind of unique
maybe a little bit too much modularity for your taste and potentially mine, but pretty cool setup and
It leaves a lot of room open for figuring out how to use it
So with that said introduced all the products, so if you watch any of these other videos, I apologize
You're gonna see the same intro again
But we'll do one product at a time and then that'll be all you have to deal with for this video. Alright, thanks guys
All right. Now we got the J tactical solutions Molly or a placard system, right? I should have put this out there of
The other J tactical stuff that I've shown I paid for all that out of pocket
I think it's just slick stuff and I wanted to try it out
But this one after the fact he offered to send me so I did not pay for this placard setup
Hopefully there's no implied bias there, but we'll see as we go through it. Okay?
So it's kind of a unique placard that perhaps gives too much modularity. I don't really think it's at a cost
Couple millimeters of bulk maybe
But we'll talk through that. So it's a two-part system. You've got your
Internal elastic placard here, which is where the the side of these buckles mount and then you have this molly wrap
Which secures in the back here. So we'll split this apart
Solid continuity
All right, so there's your elastic placard which can be used as a placard by itself without any issues
You have a little bit less velcro contact for when you close your your cummerbund
If you're one of those weirdos that likes to close your cummerbund on top of your placard, right?
If you're closing it underneath no issues. You got all the velcro back there. Okay, so that's a
Nice easy way to have three m4 mags up front without any drama
They are open on the bottom if that's a concern. So just have note of that, right?
Plenty of velcro on the front though for whatever you might need to close on top of that
And then you've got these webbing loops here
I don't know I forgot to check specifically for this if he's gonna have a retention kit
But you could tie in your shock cord there and then have a velcro tab on the front to get some retention on these
Mags if you needed some
active retention
Right looking at the the molly port or the yeah the molly wrap here
All right, so it is exactly what the name implies. It's a molly panel
it looks like it's eight columns wide and then you can wrap that around your
Magazines to add some molly onto the front of those if that's something that you need. This one also has tubes mounting
So you're gonna tie your cummerbund directly into your placard
Which helps keep everything a little bit more stable, I was just kind of nice
What else could you do with this thing well
the buckles are on
the
Elastic portion. All right, so to use it
Traditionally you really need the the internal thing there
That said there is so much velcro on the back of this thing and with the tubes tying directly into this
I really think that you could forgo
side release buckles or g-hooks or whatever else all together and
Stick any insert that you wanted to inside of here
Wrap it up and throw it on the front of your vest. I don't think you would have any issues with that at all
So it would work in function a lot like the brave castle
Chest rig in that it's kind of fielder's choice what you want to actually
contain within the molly wrap here
So I think that leaves the door open
For a lot of possibilities, especially if you already have inserts this thing
I just looked at the price and I'm spacing on it is is pretty affordable
For what it is
So you could absolutely use inserts that you already have
Would need opposing velcro, right? So you've got a hook away from the body and loop towards the body
But you could use that for whatever you wanted and I don't think you'd have any issues with weight bearing on there
So if you wanted three three or eight mags between all that continuity on the back and the tubes
I don't think those would go anywhere on you
Same thing with if you wanted a K mags or something like that. I don't think you'd have any issues
You would have an open bottom which could potentially be a concern depending on the inserts that you're using. Some inserts are
open bottom completely
And a straight pass through so you'd have to deal with that
But there's plenty of folks making inserts that have closed bottoms that you could you could throw in here
Let's see the retention on this elastic insert here
P mags fit really nice in there almost almost too nice. See how metal mags fit in here
some metal mags
could potentially
Cause you some issues if you didn't have a secondary retention
P mags, especially with the over insertion tab there on the newer ones
I don't think you're gonna have any concerns with that's that's plenty tight in there unless you're doing free fall type stuff
But I think that that's a good setup
And then once you threw the the molly wrap on there, which again is is optional
You don't necessarily need it. You could you could tighten everything up even more
I think that's cool setup. I think
Both pieces together. I want to say is right around $100, which is not overly expensive for
Current day placards and I want to say this was $30 by itself
Perhaps without tubes included
Might just be the loops there, but I'll told I don't I don't think it's a bad deal at all
And if you if you needed to tweak this a little bit to get used to those
eight columns I
Think you could
Just fine. You gotta kind of struggle bust that fold there
And hopefully you don't have some some chonky
webbing there to pass through there, but mouse clips or
Most tuck tabs, I think would get through there just fine
Even with it going around that corner there
If I had to nitpick anything
The standoff on the tubes is a little a little unappealing but no issues functionally there
And be neat to have those those loops just a little bit tighter
But that would be a real pain to get the tubes on there then
Yeah, I know
J tactical solutions elastic placard and molly wrap pretty cool setup in my opinion. Thanks
