How to Brew STRONG Beer - Scottish Strong Ale

Wine World
13 followers
Dec 9, 2025 #wine #winetasting
#wine #winetasting
Can you brew heavy-grain, high-ABV beers on our systems? In this video, we put it to the test by brewing a rich, malty Wee Heavy (Strong Scotch Ale) on our 10-gallon 120-volt electric brewing system. We walk you through the complete brewing process step-by-step, explaining how to make this big, high-gravity beer and why this system delivers the best results for a recipe like this. We also compare it to our 10-gallon all-in-one electric brewing system, explaining how you can absolutely brew this beer on either setup while highlighting the slight efficiency benefits of the system we used.
Wee Heavy Recipe Kit: https://www.clawhammersupply.com/prod...
Our Website: https://www.clawhammersupply.com
Hi, today we're making a beer.
Libby finally got her stoop.
She likes the dark side, in a clean way as in a figurative way.
Today, we're going to make something that's not a stoop, but that will be malted, a little sweet.
I think she's going to love it.
So, let's go.
We heated the water before leaving last night.
We left the controller on.
We're already in Mashton.
It's 9 p.m.
I took some bagels.
We're ready to go.
So, here's our kit.
It comes with all the grains already ground.
15 pounds of Southern Select, regenerated from Riverbend.
2 pounds of Malt Aromatic.
10 ounces of Crystal Dark and 2 ounces of Malt Noir.
Delivered in a sealed paper bag.
And we also put it in a sealed plastic bag so that it stays fresh during transport.
Same for the stoop and the yeast.
It is also delivered with your brewing sheet.
It contains all the ingredients it contains.
There is also a QR code to access the recipe on the website.
You can scan it with your phone and the complete guide is displayed.
If you are new to brewing, you can follow the instructions.
Otherwise, here is the essentials.
It should help you.
Clohammersupply.com
A bunch of ingredient kits.
So, let's go.
You will see that it is delivered with a Camden tablet.
And I'm going to add about three quarters.
In general, we put half of it, but it represents about 8 gallons of water.
It simply eliminates chlorine and chloramines.
We use city water, so it eliminates them for us.
If you don't use city water, you may not have to worry about it.
It's a high cereal bill.
We have about 18 pounds.
And you could say to yourself,
EMTT, I have one of your brewing systems all in one.
Can I brew this beer?
And I would say yes.
But I would say that the grain basket,
the efficiency of this 120 system,
it's going to be a little more efficient.
So, to play a little safety,
I'm going to take about a gallon or two,
then add my grains.
And then I'm going to add water.
With this amount of grains,
this amount of water,
I'm going to be very close to the maximum.
So, I'm just going to play safety.
Take a little water.
I'm just going to keep crushing.
And you can see that it's a good double crush.
It's going to be a beer a little bigger,
but we're just going to add a little at a time.
You can see that we will probably easily add all this water,
but it takes a few seconds to pour a little in a clean bucket.
So, better to warn you than to heal.
We have a little more grain here.
We use River Ben for all our basic malts.
E, it's a local malting in Hacheville.
If it's a German malting, Czech,
it doesn't matter.
We always use our North Carolina malting
because they make very, very good malts
that will be pleasant and fresh
and you will make a beer that looks a lot like them.
So we decided to follow this path
to support a local business and stay close.
You know.
So here's our water.
And you see,
we may not be able to fill our water.
Maybe we will,
but it just gives us a little room to maneuver.
So, if we don't have room,
we can simply add it when we pull the basket.
It will be tight.
Oh, there's a ball of dough.
Since I poured all the grains in at once,
you can see our ball of dough.
And the main problem is that as it breaks,
you see the inside and everything will be dry.
And that's what you don't want.
Because that means that these grains will not be wet
and that you will not convert the starches of these grains into sugar.
Your efficiency will therefore not be excellent.
What I did was a little crazy,
but I'm just going to spend about 20 seconds sorting
and finding balls of dough.
We're going to call this the mash.
You can see here that there is a little water.
Can I force it in?
Probably.
Am I just going to add it after the mash?
Yeah.
So, we're going to put that aside.
We're going to put our lid on
and we're going to start moving it around.
Plug the pump.
It's a little pipe.
Oh, yes.
Always stretch it a little.
Make sure everything is tight.
Turn on the pump without it being fixed to the lid.
Clean all the air very quickly.
Close the tap with a spherical brush.
Put your lid back on.
Fix it.
Put it back on.
A new bagel shop has opened in town.
I'm pretty happy to take a look.
So, I have a bagel all in one.
Peas, shallots and onions.
You took nature.
I think it's you.
It looks pretty solid.
People come from New Jersey,
so we'll see if it's good.
There's one thing I'm missing.
It's a good bagel shop in town.
So, I feel like I have to break my jaw to eat it.
I know.
Look how thick it is.
Good blood.
We crush and we crush.
And once again,
that's why I removed the water.
And if you brush with our all-in-one system
or any other all-in-one system,
do the same thing.
By using our original 10- and 12-gallon
mainly because a little more volume can go in,
the efficiency will be a little better.
The other advantages that I like about the original system
are always a low load.
The possibility of evolution of the pump.
You can easily use any cooler with this system.
You can use a counter-current cooler,
a plate cooler or an immersion cooler.
You can go from 120 if you are in an apartment or a house
and you don't want to bother with electricity.
But you know you're going to have to do the electricity again in a few years.
Then, in a few years, you can go to 220, 240
and you can use the same boiler.
And you can do a lot of these things on our system with the external pump.
You can plug it into a plate cooler.
You can plug it into a counter-current cooler.
A lot of all-in-one pumps are inside.
So you don't have that flexibility.
And that's something we wanted to put on the market with our all-in-one.
It's similar to many others,
but we wanted to add some subtleties that make it a little different.
The other thing is that this grain basket is a little better.
Your efficiency will be a little better.
Just the design with the mesh all around
allows a better flow,
a better conversion of starches and sugar.
Both systems are fantastic.
Both systems make beer.
After all, we just want people to brew beer.
We want this pasta to grow and prosper.
There is no bad answer.
There is no good answer.
A personal preference.
That's why we offer options.
My 60 minutes of brewing are over.
I'm going to turn off the pump and brew alone.
We have a high cereal bill.
I don't know why we don't use it more often,
but we sell a very resistant pulley,
especially to remove the cereal basket.
And for some reason, we never use it.
I'm going to use it today.
I brew alone.
What I'm going to do is close my spherical bucket.
First step.
Make sure your strings don't hang in your beer.
Second step.
Oh my God.
No one saw it.
But I always go up a little bit.
I break this superficial tension.
I let the work go down well.
And I'm just going to do a quick and dirty rinsing.
And you could tell me.
Hey, E.M.T.T.
You shouldn't heat that up to 170 for a rinsing.
And I would answer.
Yeah, you should.
Am I going to do it?
No.
Is it going to affect my efficiency?
Probably not.
Am I going to get all the liquid volume I need?
Yes.
Slightly pull on it.
Super easy.
This pulley.
I mean, if you brew alone at home,
it's the way to do it, honestly.
Even if you have a friend,
it makes things easier.
I'm still going to put it on the hooks
because you can then detach the pulley
and let it drain a little
and remove it from the way.
Very good.
I'm just going to rest it gently
and remove our pulley.
If you play the game,
an amount of grains,
you can see that they are very dry.
It smells really good.
Very good.
Let's bring this bad boy to a boil.
We're going to put it at 100% of its power.
It's ready.
Make sure it heats up.
It takes about 45 minutes
to go from the temperature of the puree
to the boiling temperature with 120.
So we're going to remove the grain basket
and put it in the compost bin.
We might as well enjoy the hottest weather
while we can throw the basket
outside if possible.
And how many liquids do we have in there?
Libby, a little less than 7 and 12.
Yeah, cool.
Very good.
Hot basket in it.
On the 110, 120,
you have to use the lid
to bring to a boil.
Use the hot basket as a spacer.
Steam can escape.
And then once you've reached the boil,
adjust the position of the lid
so as not to overflow with foam.
An ounce of Northern Brewer in progress.
There are 60 minutes left.
And this is the moment
when you have to slide your lid
a little more so as not to create damage.
So we have a 10-minute edition
for the ECG.
And then, wow!
The water pipe is already plugged in.
There are about 2 minutes left to boil.
I'm just going to run the boiling beer
through the plate cooler
in case there are any unpleasant things in there.
We're going to boil the beer
for about 2 minutes.
We're at 67.3.
So we're going to transfer it to our funnel.
And we're just going to send it into the funnel.
It should be a nice golden ruby brown.
I guess the foam will have a light caramel color.
Grilled caramel notes.
A little sweet and not too bitter.
It's a style of beer
that really highlights the malt itself.
I'll say it's done.
What do you think, Libby?
Yeah!
So, we use a floating plunger tube.
There aren't many holes in this beer.
We used the hot basket.
There will obviously be yeast for the fermentation
that will settle at the bottom
when we do a cold crash later.
We're going to serve directly from this funnel.
So, we have two packets of Ousso 4.
And the reason why we use two packets
is just because it's a beer with a higher density.
Two packets will give us the right amount of yeast
to nibble on these sugars.
We're going to release the seals.
So, there's no pressure on it.
It's basically like a S.A.S.A.R. at this stage.
All you have to do is squeeze them by hand.
And squeeze them a little.
Make sure it's tight.
The last thing I like to do
is put my PRV in the star sand.
Since this beer ferments at about room temperature,
that's what we do.
No special refrigerator.
We're just going to let it rest at room temperature.
We keep our desk between 65 and 68,
depending on whether we're there or not.
You can do the same thing at home.
We're done.
It's time to clean.
Very good.
We're heavy.
We're done.
Fermented in the fermentation fruit
and served in the fermenter.
It rests on the yeast.
You can see that it is very clear.
So, what do we have?
So, right here,
we have a French Broad We Heavy.
I've never had a We Heavy before.
You said it's been a long time since you've had one.
Yeah, it's been about years.
I thought we were going to compare the color and maybe the smell,
the taste,
and let's start with French Broad.
The color is quite similar.
I would say that ours is a little more reddish.
This one also has a red tint.
Ours could just be a little more red.
I think ours is just a little darker.
Yeah, I mean they're very similar.
The smell and the aroma.
They smell good.
Malte, not Oublon.
Not aggressive,
a little like we expect.
Not the same for ours.
Not a huge aroma,
which is logical.
It's a Malte Malte bomb.
It smells pretty much the same.
Okay.
Period.
Yeah, it's been a long time,
so I'm excited.
Yeah.
Let's drink the French Broad Weavy first.
M.
I like that.
Taste the alcohol.
Malte, not Oublon.
A little alcohol.
We really feel it.
It's a little what we expect.
If ours is as good as that,
I would be delighted.
So, Libby took the lead
after I put the yeast.
She put it on the gas, I think.
And it stayed on the yeast all the time.
And you can see that it's great.
Clear.
Libby still added gelatin.
Just because we wanted it to be super clear.
You don't need to do that.
But it's on the yeast
with a floating plunger tube.
So, I just thought I'd mention it.
I found that pretty cool.
Okay.
Pretty close.
Yeah.
Really Malte too.
We clearly feel the alcohol.
I would say that the big difference is that
I can feel that it's still a bit
what we call a green beer,
which means it's young.
At the moment, I feel that the alcohol
goes down a bit, which I like.
That's what we expect from this kind of beer,
but with a bit of this green taste.
For me, it's just a young beer
and Malte has a strong alcohol tolerance.
Compared to this one,
it doesn't seem as consistent or
consistent.
Period.
It's as if it was very fresh.
It's almost there, but not quite.
Five, six weeks.
Nag, I think this beer is going to be
really nice to drink.
It's almost there.
I think so too.
It looks like it's 90% on the way.
Brew it now.
You may have it ready for Christmas,
New Year's Eve, or all winter.
It's going to be cold and you want
a good beer at 7%.
Yeah, yeah.
Dude.
I'm glad we brewed it.
Yeah, dude.
Me too.
It's good to find the old kitchen space.
It's good to brew at our brewery.
