HOW TO MAKE FUNERAL FLOWERS | HEART DESIGN

Flower Arranging Art Short Videos
7 followers
Hi guys and welcome back to another floristry tutorial with me, Gem. If you're new here,
I'm Gemma. I own a floristry business in Staffordshire, England and today I'm going to be
teaching you how to make a funeral heart tribute with this oasis heart. Now you can buy these
pre-cut so it's pretty simple just from your supplier. This one's 18 inches and today we're
going to white base it and put a spray on there. Now we're not going to use any edging because my
client just wanted it all white with just a spray at the top. Now first things what we're going to
want to do is just soak the oasis foam. Now if you have a sink big enough you can fill the sink up and
put it upside down and soak it really well but because my sink isn't big enough and most florists
actually aren't, I'm just going to soak it from the tap but making sure it's got enough water in
as possible. So really make sure that all the oasis is soaked. Go around really slowly
making sure that it soaks itself basically so these gaps here when you see them turn dark green
you know that the oasis is properly soaked. So making sure everything has turned dark green.
Now you want to do that for about a minute and a half to make sure that it has a good soak.
Then when we have given our oasis a good soak and it's all turned dark green we are then going to
on to cutting our chrysanthemums. Now for this 18 inch heart I will be using six packs of white
Bonita chrysanthemum sprays. The reason that I use Bonita instead of Yoro or any other sort of
white chrysanthemum is because I always think that the Bonita are consistent because if you get white
Yoro sometimes the heads can be so much smaller and you're going to end up using more but with
the Bonita they always got large heads on them and I know that I'm going to have enough for my
tributes. And the nice thing about doing a funeral tribute is that you don't actually have to
condition these, well if you buy them on the day that you're doing them so it's really really easy.
So all you need to do is cut every individual flower head off. So what I do is use two fingers
and then cut to the measurement just below my two fingers making sure you don't chop them off.
So the stem length is about that big. Now you're going to have to cut all of these, all the six
packets, all the heads off these and then just put them by your tribute and I always pre-cut them
so then when you're going around you can just grab them and it doesn't take as long actually
doing it where I know that some florists just cut as they go and it just takes so much more time.
So let's get into it. Right so now you can see I have cut all six packets and then I do recommend
getting a seventh or a spare one just in case for peace of mind. So now I'm going to go on to show
you how to actually base the heart with the chrysanthemum sprays. So if you were going to do
the ribbon edging or foliage edging you would do this first but we're not having any edging on this
so we're just going to go around the whole base in a straight line so get the end of your
chrysanthemum and put it, I'll bring it more towards you so you can kind of see,
oh that was a bit of a squeak, okay then just pop it on the line where the oasis meets the base
okay so then your chrysanthemum is then covering the foam base and you just want to go around
and do that again leaving no gaps in between each flower okay like so and then just do that
all the way around the heart. So now we have made our edging with the white Bonita chrysanthemum
sprays and you cannot see the foam at all so now we're going to be working in sort of a line effect
so whatever we just did here we are going to do on top so just repeat the next layer
just like you did the first layer with the edging making sure that you do not leave
any gaps to see and if you do see a gap you can then just fill those in as you're going along
so I'll just hold this up to you so the top of the neck of the stem and the bottom of the flower
is sitting nicely to the oasis now when we are going to do the front of the heart we are then
going to elevate this so leave about half an inch of the stem still showing and this will give it a
nice sort of 3d look so we are still going to be doing the same lines but we are just going
to leave about half an inch of the stem still coming out so if I turn that round I don't know
if you can actually see that but if you see this one you can see some of the stem still coming out
about half an inch now you need to continue doing that until we get to the center so I think now
you can really tell that the flowers have been more elevated than the edging and you can already
see that it's making that sort of 3d look to it now we are going to do exactly the same until we
get to the center now because we are going to do a spray about here I always make a little mark
so that we don't put our white chrysanthemums there I mean no that's where the spray is going
to sit and we don't have to base that bit right guys this is an example of why you really need
to have a spare packet of chrysanthemums because I have still got a bit of an area left where I've
got not enough chrysanthemums and about half a packet of the seventh packet that I'm going to
use will probably do that so yeah so that was a prime example of why you need a spare packet
so the white base is complete and I did actually use about six and a quarter packets
of white bonnie to chrysanthemum sprays okay so this is what it's going to look like and that's
our little bit there to put our spray and I will go through in detail about how we do this spray
right I've just got my pack of leather leaf here and I'm just going to cut into the bag
and cut into the elastic bands open my bag fully so that the top of the heads don't break
and we're probably going to need one or two stems of the leather leaf so what I usually do
is get that sprig of the leather leaf here and then if I just bring this towards you
I'll put the camera down a little bit so you can see it better
so from this top corner I then insert the stem right into the oasis not until it goes into the
foam obviously because it will have no water so that one at the top then I'll get my second one
got exactly the same length of the top of the leather leaf and put that at the bottom
I'll move you more towards there we go that's a bit better isn't it you see probably see my
crocs now and then what I do is so you have like four stems still left on your stem of leather
leaf so I just get one of the stems like this and it creates the diamond shape in the middle
so it's very easy like that so it really creates that diamond shape it's just like making like a
mini coffin spray if you haven't seen our videos on how to make the coffin spray I shall link it
but we basically just want that diamond shape so I'm going to put another one here and then
that one hasn't got a twin so we're not going to use that and then another one here
I think of like turn that around put it back there okay so you've really got that full diamond
shape on the spray so now we have got this diamond shape I'm then going to add the roses
so I'm going to use three pink roses and five yellow roses so I'm going to put this pink one
in the center making sure it's nicely in the floral foam but don't go too hard so it goes
through the actual foam base because it won't get water and just put one there and then put one at
the top here to create a line and then I'm just going to go around with the yellows creating a
nice sort of line as well so I put two there one on the other side one in the middle and one up
there so that creates a nice sort of flower effect in the diamond and it looks like a mini coffin
spray now I'm going to go in with a bit of jip for the filler flower just to give it that nice
sort of fluffy look okay so I've just got a few sprigs of jip here and I'm just going to go around
and fill in the gaps so that it just looks more full so that is what a filler flower is
they still cost as much as the other flowers if not more if not less but it just makes it look
more so I'll put a bit here a bit at the top here and I think that is enough jip for that
and here is the finished product so just to recap this is an 18 inch foam base heart
based with white bonita chrysanthemum sprayed we've used two stems of leather leaf to create
the diamond shape at the top we use three bright pink roses five yellow roses and a few sprigs of
jip for the filler flower and this is it complete and please remember lines with no gaps now this
principle can also be used for cushions pillows letters so anything base basically is this
principle lines and no gaps okay so if you did find this video super duper informative I would
love it if you could subscribe like and comment so I can make more videos for you and please check
out our other videos we do full in-depth tutorials I found youtube really helped me when I was on my
floral journey and I'm trying to make videos that I never found and would be useful for you as a
beginner or if you are an experienced florist and you've got any other tips and tricks to tell me
I'd love to hear from you any comments helping each other building the community is key so thank
you so much I hope you have a lovely day or have a lovely day and I'll see you in the next video
