Plus check out all of my other favorite tools on my Amazon Storefront here 👉 📍https://www.amazon.com/shop/thepapery... (as an affiliate I earn from qualifying purchase made here)
Music: Green Green Garden by Chris Haugen --------------------------------------------------------------------------------------------------------------------------------- Hi there! I’m Meredith, art school grad and mama of two awesome and incredibly energetic littles. I fell across paper quilling by chance and fell in love with all the amazing things paper can do! Follow along as I roll tiny quilling creations and I promise I’ll teach you everything I know!
Hi folks, this is Meridith from the Paper Craft Freak and today we're going to be making some
bleeding heart flowers out of our quilting paper. To start with I have a few different
colored strips here. I have a rose colored paper and also a light pink for the flowers themselves,
a little bit of light brown and a nice bright green. These are all going to be 1 1⁄8 inch wide.
As far as supplies go you can use any quilling tool that you wish. I'm going to be using my
needle tool but a slotted tool works fine. If you prefer the savvy slotted tool that's always a
favorite around here that will be great as well. You probably want to grab some small scissors
and also some tweezers will come in very handy. We're going to be building our flowers and our
flower stems on our cork board. You want to grab a work surface, cover it with a non-slip surface
like this parchment paper. I have some pins, some Elmer's glue all in a needle nose container,
a ruler and then also a bit of a mat board and that's really just to show off the finished
product. I have some photographs here of the bleeding heart flowers and they're really they're
so unique they don't even look real. They don't look like they would even grow in nature but
they are shaped like a heart and oftentimes they have two little wings coming off the sides and
that's when they start blooming. You can see the white coming from the underside that's going to
be the seed to make new flowers and they grow kind of in a chain along a long branch which we're
going to be making today. We're also going to be making the leaves that go with them. We're going
to start off with the stem just so we can get that ready and put it to the side so we can dry.
We're going to make this nice and sturdy so it's going to be a double thick strip. I have an 18
inch piece of this light brown. It is from Fold Creations and I fold that right in half.
I add a solid line of the white glue all the way down from that halfway point to one of the ends,
fold that back over and zip it through my fingers just to make sure all the air bubbles are out.
If you miss any spot with the glue you're going to want to go back and just fill that in because
any blank spot that doesn't have any glue is going to make a gap or an air bubble in your
double thick strip and you don't want that. You'll be able to see it in the end. You'll probably want
to make a couple of these per branch because one is going to be the body of the branch but then
there's going to be little pieces that come off and connect the flower to the branch. You're going
need a little bit extra. I have some that are already dried here so they're nice and sturdy,
perfect for a branch or I guess a flower stem would be more likely way to describe this.
Ran it through my fingers there just to get it a little softened up. I'm going to take my tool
and just do a couple of quick turns around one end just to make a little bit of a coil there,
just to sort of give a little shape so the branch isn't just pointing off into nowhere.
Then I'm going to use my tool to make a couple of bends in my branch. I want it to kind of go
down and then up again so sort of like you're curling a ribbon. Run it between your tool and
your finger there and we're kind of looking for this shape. If your branch ends up a little
straighter that's okay. We're just taking a little bit of artistic license here just to give this
branch a little bit more movement than the photos we saw. Snipped a little bit off because it was a
little bit long for my liking and now we're going to go ahead and add a couple of little stem to
this piece here that our flowers are going to attach to. So to do that I want to make sure that
my branch is nice and stable first so I just use some pins kind of crisscross them in a few places
just to make sure that my branch is nice and flat against my work board and then it's just a matter
of getting some little pieces, I would say no longer than about three quarters of an inch at
the max. I'm going to dip them in a little bit of glue. I haven't used my glue bottle yet today so
not 100% ready to go. There we go. I'm just going to put a little bit of glue on one end
like so. You can also dip if you'd like to and point them down at a curve but we also
we're going to be putting three on this branch here
so you can tear this strip, you can cut this strip, whatever you like
but in addition to the little stem going down the bleeding hearts also have a little piece of
that same kind of stem but it's going up as well. It sort of looks like that right at the same spot
where that little stem hits the branch there's a little one that goes down and then there's one
that goes up as well. Like I said, I'm going to put three on my stem and get all of those
together here just softening it up again there's one and then there's another one for the long
stems and then just a couple of little pieces just for the top there and get them all glued
into place and then we're going to move on to making our flowers. While the stems are all drying
we're going to go ahead and start making our flowers. The first thing we're going to do is
make the larger of the flowers we're going to make. We're going to make two different kinds
and these ones are going to be more of a like almost fully bloomed bleeding heart so what we're
going to do is take the rose colored paper these are also 18 inch strips and these are also by Quilt Creation
I'm going to roll them all the way from start to finish on my needle tool and we're just going to
be making a basic coil to start with so being that it's a little bit long it can be a little tricky
to do all the way on the needle tool and keep it straight so I usually get about halfway done
and then start rolling it in my hand like I said any tool will work for this you don't need any
special filling tool whatever you're comfortable with will be great for this project. So here we
are all the way rolled I'm going to let it relax a bit in my hands I like to let my coils open up
just enough so that I have a few extra rings on the outside I don't like to let it go all the way
open which is a personal preference that's why the strips are kind of long
for this project if you like more of an open look you could use a shorter strip and you would get
more of a negative space sort of look once you let your coil open up the way you like.
I'm taking a second strip of the same size and doing the same thing rolling it all the way from
end to end I want these two halves to be about equal these are going to be two halves of the
same heart shape remember in the beginning we saw the flowers and they get their names because
they look like hearts so we're going to be making a basic heart out of pulling paper which is
something you're going to see pretty often I know I've done a bunch of projects where I've made
hearts out of my paper and since I want them to be even I want them to open up around the same
size so I take the one that I've already have glued and I just sort of measure the second one
up before I glue it just to make sure that it's going to be about the same size get that all
down and then we're going to go ahead and burnish this a little bit make sure it's thick
I'm going to go ahead and make the heart and that is just two teardrops we're going to hold
one holding the eye right in the middle make sure that stays where I want it and you have
your teardrop we're going to do the same thing for the other side here's a close-up of what I
was talking about holding the center the eye with one hand pinching the other side is going to help
you keep everything even you're not ending up with your eye too far down towards the point
or maybe a lot of gaps in between your layers just to help the tip next thing we're going to
do is make the two little pieces that we're sort of winging out from the side of our heart as it
is blossoming so I have two strips of that same rose colored paper this time they're about five
roll that up all the way to the end and let that open up
and instead of gluing it we're going to start shaping it right away so I'm just pinching it
really far to make that teardrop point and then we can glue
you can always glue first if you like but sometimes in the smaller pieces it's just
easier just to go right into it and there we have a teardrop but it's a little bit more smushed
than that last one I'm going to do two of those exactly the same way and then we're going to be
doing that lighter colored bit that's coming from the heart shape you can use white for this
I have just a really pale light pink that I'm going to be using instead
and for that one another five inches we're going to roll that all the way to
the end just like before and just like before we're going to go ahead and get that pinched on one side
but instead of leaving the other side like a true teardrop we're going to
push up from the bottom as we're pinching and that's going to widen that other end quite a bit
and that's sort of what we're looking for the tricky thing about the bleeding heart flowers is
as they blossom there's so many stages that they go through we're taking a little bit of
artistic license with this like I said we're kind of simplifying this all the way to the next
here are all of our pieces for the first blossom that we're going to be making
and we can go ahead and put that together it's going to be helpful if you use pins and a cork
board for this just to keep everything in place while they dry it's not necessary but it's going
to make your life a little bit easier and make these go quite a bit quicker and if you had to
hold each individual piece really close as they dry so I have my cork board here I have my stem
setting but I have my pin so I'm just using a little corner here
and I'm going to put a line of glue down one heart and then a line of glue down the other
side of the heart and we're going to put them together but that light pink piece is going to
come from the bottom so the top of the hearts are going to be hitting each other and the point is
going to be on either side of that light pink piece coming from the side this is going to be a
little bit of a juggling act here because these pieces want to stick to my fingers today sometimes
don't be afraid to put the pins in between the layers of your culling paper not going to really
move them around too much and once they everything is dry and you take them out you're not going to
really be able to notice remember you're not putting the pins through the quilling paper
itself you're just putting it in between the layers and that's what's going to keep everything
nice and snug and make it look like one piece instead of a bunch of shapes of paper kind of
stuck together randomly at this point I'm going to put a little bit of glue on each of those
little winged bits that are going to come out from the side
and glue them right at the base of my heart you can use tweezers if you need to get your
hands on these little tiny pieces I have my needle tool here just to push everything into place
and at this point I am pretty much done except I don't like that little bit of a gap that's still
at the top of the light pink so I went ahead and put a couple more pins in just to close that gap
up don't be afraid to do that as well now remember there was a lot of bleeding hearts
on each of those stems that we saw in the beginning I'm only making a couple you can
make as many as you like I have two that are the same size kind of the larger end
of the blossoms and I'm going to make one that's a bit smaller sort of in a different stage of
blossoming so instead of the 18 inch strips to make the heart I have two halves that are about
nine inches each and get those all pinned together get them snug all the way and this time instead of
a light pink or white piece coming from the heart we're going to be using a five inch strip
of the same rose color similar idea as the last one that light pink but instead of pushing up
a lot from the bottom we're just pushed up a little bit and then I have two pieces that are
about three inches long shaped into a teardrop with a tiny pinch on the other side and they're
going to go on either side of that so this is another stage of the bleeding heart before it
gets into the little winged bits coming off the side it looks similar to those shapes so we have
process of blooming here on the bleeding heart next we're going to do is make some greenery
for our our flowers and I did something different this time and I'm making sort of a 3d leaf that's
bent over and that'll make sense in a second but for most of it it's going to be the same shape
just different size strips so for the biggest section of the leaf I have a nine inch strip
of this called leaf green also called creation and it's going to be a long pinch on one side
covering two-thirds of this piece and then a little bit pinch on the other side it covers
about the top third it's going to be really long on one side and a little bit of a peak
on the other side and then I have a strip that's about six inches and a strip that's about four
inches so there's three different sizes of the same shape and then we're just going to glue them
all so the peaks are at the same spot and they're all just snug one right next to each other so
there's the nine inch and the six inch and then we're going to put a little bit of glue on the
end of that one and then put on the four inch so the points are all in the same spot like I said
and then it sort of fans out from the other side so I have another one that's a similar size
and then I have one where it's like a four inch piece and then a six inch and another four inch
we're going to put all these together on a little piece of stem that's going to come
like it's branching off of the bigger stem that we already made
and it's all going to come together into one piece so all of my flowers are dry at this point
I'm going to get all the pins out
and then all my branch is done and it's at this point that I realized that that last
piece of stem that would attach the flowers to the branch I do not like the look of that
I'm going to end up putting everything on there but I'm not going to attach everything
just yet because it's just in a weird spot it's too close to the one stem
and then sort of coming in a weird place at the off the branch but it was kind of too late to do
anything about that now I'm going to go back and fix that later but I didn't want to have to redo
everything and make this video even longer so sometimes I like to show my mistakes because
then you realize not the end of the world everybody makes mistakes we can figure out how to change that
but I want to go ahead and keep pushing through I'm going to make the leaves off the end here
the idea is that they're going to come from the bottom of the branch on their own little extra
stem so that involves me repinning the stem a little bit and curving another bit
so it's right underneath so I'm thinking about not only how to make this look similar to the
actual plant but also make it an interesting quilling to look at as well so trying to make
everything even and balanced and dynamic and just good composition all around so that's sort of
where I'm playing with at this point so I want my first chunk of leaf to not have glue on the end
but glue right there on the peak of it that's going to come right off the edge of my little
stem and then I want to take that piece that has this the two different sizes with the longer one
in the middle place that right next to so now we have what looks like the side of a leaf but I
really want to go in and make this look three-dimensional so that's where that other piece
of leaf comes in and I accidentally put glue on the top again did not want that
we're going to put a little bit of glue right here on the top of the branch and the leaf that
we just made and we're going to end up placing this next chunk of greenery right on top of that
so that it looks like it is one individual leaf one big leaf that's kind of folded over on itself
I just thought that was a fun way to kind of make this
look more alive then it's just a matter of putting some glue at the peak of your heart
where they're going to meet the stems like I said that last one is not going to work out
I ended up taking a a craft knife or a x-acto knife and gently separating that little bit of
stem from the branch itself and then repositioned it later on down the road but for time's sake
we're going to take one that I've already made in a similar composition and I'm just going to put it
on this matte board just so you can see the branch it kind of blends into my table here
so this is what it could look like when you're all done super simple really works with filling
some of our projects lately have been very involved and we're kind of moving away from
the beginning filling a little bit so it's nice to kind of get back to basics and just do some
simple flowers that anybody can do no matter their skill level but look really unique and
something that you don't see every day as always if you have any questions leave those in the
comments I'll answer them as soon as I can I'll link to all my supplies and tools in the description
box for the video as well as links to my buy me a coffee page where you can find some filling
extras and learn how you can support the channel and keep it growing always greatly appreciated
in the meantime don't forget to like and subscribe so you can be around for my
next video and I'll see you then thanks so much for watching bye