We made $10,485 in one weekend selling 3D laser cut door hangers at a single craft show and it was not luck. In this video we break down the exact product mix, pricing formula, batching system, tools, and materials we used so you can turn your laser from an expensive hobby into a real business.
We start with the three types of 3D door hangers that sold the best for us at high end curated craft shows. Modern farmhouse rounds, interchangeable signs, and viral niche designs that stop people in the aisle. You will see real examples, price ranges, and why each category works so well for buyers, gift givers, and impulse shoppers.
Then we take you behind the scenes in the shop and talk about production and profit. We show you how we batch cut and paint on our xTool P3 80W CO2 laser, why moving up from a smaller desktop laser can quadruple your output, and how we use consistent laser ready MDF and Foxy Hues outdoor craft paints to keep quality high and rework low. We even share our simple pricing formula so you know exactly what to charge.
In this video you will learn:
- The 3 door hanger categories that made us over ten thousand dollars in one weekend - How we batch produce 16 inch rounds in minutes instead of hours - Why laser ready MDF and outdoor rated craft paint matter for profit and durability - A simple pricing formula for your laser projects so you stop guessing - How we choose high end craft shows and build a booth that sells
If you want the full craft show strategy and high profit selling system, make sure to click the link below and join the waitlist for our new course: Show Up & Sell Out: A Craft Show Masterclass https://kandgmakeit.com/pages/craft-show-course-waitlist
FYI: We are not professionals, and we don’t claim to be. This is what we found worked for our project. Yours may need a little different approach. We have just enough woodworking skill to make some basic furniture. Safety first!
FTC Disclaimer: This is not a sponsored video. All opinions are genuinely our own. This post may contain affiliate links and we earn a small commission if you make a purchase after clicking on my links. It doesn't cost you any extra. Thank you for your continued support to keep Making It!
We just made $10,000 in one weekend
using one product. It was 3D door
hangers. And it wasn't luck. It was a
scalable system using the right tools
and a ruthless batching strategy.
>> And if you want the full laser crafting
business blueprint, stick around. We're
going to start with our bestsellers.
[singing]
[music]
>> What is up? Welcome back. Do you like to
do it, build it, or make it, and make
money?
>> So do we. We just wrapped up our last
craft show of the season.
>> And what did we learn over the last five
years?
>> So, what did we learn?
>> We have a couple of tips for you today.
And we're going to start with the three
main categories of door hangers. We've
kind of broke them all down and figured
out what three main categories are the
right mix of products to bring for a
craft show.
>> Category number one, the absolute best
seller, the modern farmhouse round. The
look, it's going to be a stained backer,
maybe with some shiplap, some 3D
letters, either out of acrylic or
painted wood.
>> Some of the key features, as you'll see
it with a monogram or a simple welcome,
hi, hello.
>> Here's another monogram where the color
scheme is opposite. The backer is
painted, but the monogram is stained.
This one will bring in a few extra
dollars because it is personalized with
a last name. You'll sometimes see a
messy bow like this one or a bow with
some greenery like this one. Why do
these sell? Because these are neutrals.
They are timeless staple that works for
every door. Great for realtors,
>> housewarming gifts, wedding gifts. I
mean, they just make a great neutral
gift that you can give somebody that
will match most decor.
>> Mhm. And they'll sell anywhere from 45
to 65. If I've got personalization and
greenery, I'm selling it at 65.
Something like this that's pretty
generic that you could pick up anywhere.
We sell it for 45.
>> And most door hangers are between, you
know, 16 and 18 in. These here are 16.
And this big guy is just 18. And see the
difference. Category number two, the
highest value trend, interchangeables.
>> So the look here is a standard welcome
or home sign, but with some sort of
interchangeable element. I know you've
seen the home sign with the
interchangeable O. We have one of those.
Uh we do a top and bottom
interchangeable.
>> We also do the truck bed where you can
change out the cargo,
>> the little gnome.
>> Yep. We have the gnome where you can
change out the things that he's holding.
Yeah. The seasonal accents or the
monthly accents. It's usually monthly
that go with these signs.
>> These command a higher price point.
These are somewhere between $60 and $100
because it does come with all the
accents. and it allows for recurring
revenue because you can have them come
back and buy new seasonal accents. Why
this works, these are usually purchased
by people buying for themselves and it
solves the storage problem so that you
know after you've make a couple of these
in a workshop, suddenly you've got 12 of
them in a bin that you're trying to
store. If you use an interchangeable
version, now you're just changing out a
top interchangeable seasonal accent or
maybe the little O or the the gnome
holding the little pieces. Those are
much easier to store than 12 separate
reads.
>> Category number three, the viral niche.
These are usually the funny, snarky, or
pet lover, a hobby.
>> The look for these, it's pretty much
anything really. You're just looking for
something that's going to evoke an
emotional response.
>> Some of the key features on these is you
got like different categories inside
this category. We have sarcastic like
welcome is welcome to the show.
Don't be a prick. Let's get toasty.
>> Or signs for pet lovers. Things like
hope you like dogs or dogs welcome
people tolerated. Cats welcome people
tolerated.
>> Then you have things like hobbies and
icons. Things like gardening because
murder is wrong. Or something from a
movie that will evoke emotional
response. Oh, that's my dad's favorite
movie.
>> Mhm. We have uh some from A Christmas
Story. You'll shoot your eye out when
folks see those at the shows. They're
like, "Oh my gosh, we watch that movie
every year. I got to get it." Dad's
going to love that.
>> Oh, that's my dad's favorite movie.
>> Yeah, I get that a lot. Why these work?
These are great impulse buys. These do
evoke an emotional response,
familiarity, something that you've seen
before, something you know a family
member will appreciate. Or it could be
something on social media that's going
around. Could be trendy.
>> Mhm. And what these sell for. These sell
anywhere from 55 to 75. It just depends
on how much effort we've got into it,
how much paint, how many layers are in
it. Now that we've shown you and told
you about the three categories of signs
that make for a great mix of signs at
your craft booth, how do we make this
happen?
>> You're going to need the right material
and the right tools. We say it all the
time. You're going to need the most
powerful laser without busting your
budget.
>> Laser
>> with the largest cutting area that your
space will allow. It might be time to
take this from a hobby to a business. If
you're working in a home studio, an 80 W
laser with a cut area of 18 by 36 and a
small footprint might be perfect for
you.
>> Today, we're showcasing our X tool P3.
This is our 80 watt laser and you can
cut a full 16inch door hanger in one go.
We can put the backer and the top pieces
and the welcome word all on the one bed
and cut it at one time. Running a full
size 16inch door hanger on a 55 watt
desktop CO2 laser might take you about
70 minutes. Now that same cut using our
P3 is only 17 minutes. So that
quadrupled my production time. I can get
out four signs in the same time it would
take me to do one. Time is money. So,
you've just quadrupled your wage.
>> We produce our signs in batches. We will
cut three to five of the same design and
then we will batch paint and batch
assemble them all at one time.
>> What's the number one question you get
asked when people find out you have a
laser? Can you cut metal? No. What's the
second question you get asked when
people find out you have a laser? Can
you make me an acrylic sign? And yes,
with an 80 W CO2 laser like the X tool
P3, yes, you can cut acrylics, all the
acrylics, the flat opaque acrylics to
the mirrored acrylics up to a/ inch
thick.
>> Up to a/2 inch thick clear acrylic.
>> Yes.
>> And the next question is always, well,
how big can you go?
>> That's another feature of the 80 watt
CO2 P3 laser is it also has the pass
through capability. So, not only can it
cut a full door round in the 18x 36 in
bed, it will cut with the pass through
24 in by pretty much infinity. So, next
time you're looking to level up your
side hustle into a small business, you
can say yes to those larger projects
like, can you make me a sign for my
business? Yes, you can. You can use the
woods, you can use the acrylics, you can
use the fancy standoffs and really
create a professional largesize business
sign. And bigger signs mean bigger
profits.
>> Now that we've told you the types of
signs that we use to bring to our shows,
we've talked a little bit about the
tools that we've used. Let's talk about
some of the materials.
>> The right materials is just as important
as the right tools. We like to use MDF
because it's consistent. It cuts the
same every time. It's the same settings.
I'll throw it in there, pull up my file,
hit go, and I don't have to worry about
it. Now, if you purchase some of your
MDF from the big box stores, it's not
always as consistent. It's going to be
more smoky. It's going to have more
char. And it's not always going to be
the same settings. Ask us how we know.
We have been there. When we first had
got our Glow Forge, we started with one
sign, we got more MDF, and tried to
finish that same sign, and it just
wouldn't cut through. So, we're using
our brand of MDF. It's Swiftox Laser Co.
That's our brand of MDF and it cuts the
same and it's consistent every single
time. We also have 8 inch MDF, quarter
inch MDF, and 8 inch birch.
>> Now, that stuff is rated for lasers, so
it's meant to be cut in the lasers, so
it comes out with cleaner cuts, more
consistent cuts, low char, and it cuts
like butter.
>> Now, we know what wood we're using.
Let's talk about finishing.
>> The right finish is just as important.
What will set your signs apart from
other signs will be the vibrant colors
and the durability. Your average craft
paint will fade in the sun and require
some kind of clear coat to make it
weather resistant.
>> Another option is using spray paint, but
spray paint is pretty expensive. It's $7
a can. You might get one or two signs
from that spray paint and it requires
ventilation. So, you're going to need to
use that with some sort of a ventilation
or spray booth or you have to take it
outside
>> and outside's not going to work. It
doesn't work in the heat. It doesn't
work in the wind or even the cold.
>> So, we like to use our outdoor craft
paint, which is our Foxy Hughes paints.
We found that this is the most
economical solution. One 8 oz bag of
Foxy Hughes paints will get you 10 to 20
signs. It comes in multiple sizes,
affordable sizes. You don't have to
spend $50 a can per color of paint. You
don't have to buy it in a gallon size.
It comes in multiple sizes and it has
all those poppy bright colors. This is
an outdoor rated craft paint. It is UV
resistant, weather resistant. You're not
going to need any kind of a sealant coat
on it. It's the same kind of paint you
paint your house with, so it has all
those additives and makes it great to
put on MDF to hang for outdoor door
hangers.
>> And if you want to learn how to paint
our signs, we have a video series that
every Tuesday we go live with what we
call Test Cut Tuesday, where we have a
new design and we try to paint it and
assemble it, make sure it works. We have
a little craft and chat. You have a good
time for like an hour and it's a new
design every week.
>> Sometimes I even get into some paint
techniques.
>> Here is our number one tip for painting.
We use a 4 in dense foam roller and we
reuse it. Every color that we have has
its own 4-in foam roller and we keep it
in a Ziploc bag and we reuse it. We use
it till the wheels fall off. A one
roller can easily paint 180 signs. Let's
talk profit.
>> To make sure you aren't just running an
expensive hobby, you got to have the
right pricing formula. And we can use a
pretty simple pricing formula to start
with. If you're just getting started,
here's a real basic formula so that you
know what your retail price should be.
It should be your materials plus machine
time plus some labor times four.
>> That's it. It's pretty simple. So all of
my hard cost, things like paint, glue,
ribbon, wood, and all of my time, and my
machine time comes to about $15. So I'm
going to sell this sign for about $55 to
$60. Never price based on your
competition. Price based on your
expenses, your cost, and the value that
you provide. Let's talk about our craft
show strategy. We don't just sell at any
vendor market, popup, or farmers market.
We sell almost exclusively at high-end
curated craft shows.
>> Those buyers are looking for quality,
not bargains. That's why our high value
signs sell so well. The total breakdown
for the weekend was $10,485
in gross revenue. Now, this wasn't luck.
This was the right mix of signs and
optimized production system using the X
Tool P3 cuz we're able to batch out our
signs. You could do a full 16inch round
with the tops and bottoms in 17 minutes.
So, I'm able to get like four or five
signs out in about an hour or two. It's
also using the right materials like
quality MDF and the right finishings.
So, you only have to finish the sign one
time. You don't want to sell low value
singles. You want to build a high-profit
system. If you're interested in learning
our full craft show strategy, including
our high-profit selling system, as well
as our booth setup system, click the
link below to get on our weight list for
our new course that we'll be offering in
January, where we go through the full
process of how we do craft shows. We
talked a lot about the X Tool P3 today,
and it's the holiday season, end of
year. Now might be a great time to take
your hobby and turn it into a business
with some of the seasonal sales that
XTool has.
>> We'll leave our link to X Tool down
below. That'll take you to some of the
holiday specials happening now.
>> Well, we're about out of time. I got to
get going, but we want to give a big
shout out to the Make It Mafia. We love
you guys. And over there on Patreon, we
get to talk about craft shows and
selling at craft shows, all the
different strategies during monthly Zoom
calls with the Made It Master folks.
>> And if you're interested in joining the
Patreon community, we'll leave the link.
>> And if you're interested in joining the
Patreon community, we'll leave it
>> same spot.
>> We'll leave a link below with all the
perks that come along with joining the
family.
>> Are you ready?
>> Uhhuh. We'll leave a link down below
with all the perks that come with
joining the family.
>> The mafia family, the Make It Mafia
family.
>> All right.
>> All righty. Uhhuh.
>> We'll leave a link down below with all
the perks of joining the Make It Mafia
family. [laughter]
>> It's really not that heavy.
>> Damn. You know, we're getting good.