Shekkin Gears: Replica Crye AVS Padded Yoke

Ballistic Lab
1 follower
Dec 5, 2025
Shekkin Gears: Replica Crye AVS Padded Yoke
Alright guys, hey, I made a post about this on or its story on Instagram and
I got more questions than I thought I would or more comments. None of which were what I was looking for
So I want to make this video quick
So that my thoughts are out there and then I can just link this to answer the rest of the questions
Alright, so I've gotten a lot of questions about the cry padded yoke and a lot of comments that it's amazing
people love it with their ABS when they don't want the harness and
And then a lot of questions about what plays well with it
What doesn't work and I didn't know the answer to any of those because I've never had one in hand
All right. I still technically don't this is a replica from check-in
I was working on putting together something in
woodland
There's woodland when I wore it. I don't know it as I'm 81
It was only I'm 81 when it was cool
All right
So so I picked this up to use for a different project and to kind of dip my feet in the water
Figuring out what it's about and if it's worth it and five minutes after having it. I'm sold
All right, I'm gonna get a cry one so I can answer all those questions. All right
But I think this thing has a lot of possibilities in it
even this replica that's missing a couple of things and
I kind of want to run through those with you real quick. All right, so
First of all, it is a full set of suspenders. All right
so this is the thing that was immediately enticing to me about it is it is a very nice set of
Suspenders that you can hang war belt on or even just your trouser belt. Whatever you want. All right, and I noticed
that even with these
Suspenders which are removable and I'll get it on the table and show you more
There's exposed hook Velcro here or loop Velcro, I'm sorry
so the the question that I posed in the story is
How come nobody is making anything that that plays with this outside of cry?
So what I was kind of getting at is with this exposed loop
You've got a couple of different options and this isn't gonna articulate it super well, but it was handy
So I've got the the Shaw
Placard here. So there's a couple different options you could do one you could make
some vertical
Feeder straps with a female buckle on them that mount on here and then you could just plug and play a chest rig with that
or
Something like this where it's got this one wrap granted. It's the wrong orientation. You could just put
Velcro on there
All right, which is what cry recommends if you're putting the the ABS chest rig on here is you just run the the Velcro
Back straps up and then because it's you know, inch and a half an inch and a half with full continuity
It's not gonna go anywhere. Plus you've got these straps to help retain it. So
the story
on Instagram was
For the dudes that are making
Kit and selling it piecemeal
Why is nobody capitalizing on this with all the hype that these have granted?
There's not a lot out there on them as far as media goes
You can very easily tie in at least the vertical straps on a chest rig to this
And then you've got a player on with a little bit about how you're gonna attach the sides
Which isn't nearly as straightforward. There's a couple different options. None of them are overly complicated
But that's kind of what I was getting at is
you could put any platform that you want it on here whether it be
Something like a micro fight that just plugs right in or something a little bit bigger that wraps around more
There's ways to make it work. And and this harness granted. It's I think a $200 harness is
Ready to go. It's a very very nice kind of
Hx hybrid even a why if you want it to be a why a lot of people when I was
Clowning on X harnesses said the why like from the taps is something that they enjoy
So I'll get it on table so you can see more of it and I'll kind of show you how this works
I'm sure I'm gonna have to do more videos on this as questions come in
So this will just be kind of wave tops and and how it works and what it can play with
The crime manual on it just like most of the crime manuals is actually pretty good. I just never dipped into it
I don't I just didn't think of it
So hopefully this sparks some interest and then you guys can look at that and see a little bit more of the capabilities
All right. So before I get too much grief on
buying a replica product my kind of my moral baseline for buying replicas is
If it's something that is still available from the manufacturer, I will not buy a replica
All right
If I need it in a pattern that doesn't exist or it's something where I'm gonna have to pay collectors prices because they're not
Actively made anymore then I'm alright getting a replica. Alright, so this fell in my opinion into that kind of acceptable
justification category
Plus I just wanted to see what all the hype was about now that I know I'll go pick up a real one from cry
All right
$200 to answer some questions not knowing if I can make a video on it was it was kind of a bridge too far
but now I know and
We'll get that fixed in short order
Alright, so like I said in kind of the intro and explanation there are I've caught at least one thing on here
That's different from the cry. I
Looked at the manual as close as I could granite was on my phone. So I might miss other things but
we'll go through kind of how this works and how it's set up and
Hopefully it's not too far off from the real thing
But I'll have a real thing soon enough and I can fix those mistakes as the time comes
All right. So what I noticed was missing
Right off the bat is these from cry are built to interface with their war belt suspenders
Which is a little odd to me it's a lot of steps
To get to kind of the same point. All right, so
this
Velcro portion here should be a pass-through on the real one
So you can see I can get my fingers under it on this side, but I can't
Pass all the way through on the real one. This is essentially a inch and a half two inch band that goes across
So those those very recognizable cry suspenders that that vertical strap feeds under there
And then the front straps feed along here
so that you're essentially just adding padding and kind of a hanger to your suspenders, which is
Useful, it's just $200 to get to the point where you have some padded trousers suspenders
On top of buying the suspenders is it's quite a process especially when it kind of already comes
Set up for that purpose. So you've got
This back strap which just feeds through a metal d-ring there
And then you've got some
Some ladder locks or try glides there so that you can mount this
They they say to an ABS belt, but really you could do it to anything a scuba belt. It would work really well on
Because the belt is is bearing
The load as opposed to the molly loops. I think it would almost work better than the ABS belt
But that's just my opinion. So this is obviously, you know free-running you can take it on and off as needed and
Then on the front you've got these
straps and this is just a
velcro sandwich here
So you've got this velcro that mates with the velcro on the yoke and you can remove these if you want to it doesn't change
Anything that's going on up top actually
Because any velcro that's that's on the suspender is mimicked on the the yoke itself
So that's kind of the first use right there is you've got suspenders
Next up you can integrate this with their
ABS detachable chest rig
Very very similarly. So instead of having the suspender leads here. You have the vertical straps on the chest rig
They made up exactly the same way here and then on the back you would use
This strap or or a strap that comes with the chest rig
I can't remember how that works and it's not explained in the manual and I don't have my chest rig anymore
But this would be your your top set of side buckles would feed into here
So even if it doesn't come with a strap
You just need a couple of probably male buckles to weave onto here and then that attaches
And then obviously the back strap on the chest rig is its own thing. It doesn't relate to this at all. That's the lower strap
Additionally you can use this as a way of making ABS plate bags
Suck much less as a standalone plate carrier without the harness
So you would made up the front plate bags on this velcro
just like
You would made up the the straps on the back plate
All right
So if you want one side quick release you plug that in there if you want both of them fixed mount you just extend both
Shoulder straps coming off the bag and they mount in here easy-peasy if you can't figure that out
You probably shouldn't be messing around with kit anyways, right?
So that mounts there very easily and then your rear plate bag shoulder straps
will feed
From the plate bag into these metal D rings and then back down
To the interface of the plate bag and secure there
So much like you secure the quick release on the front plate bag where it goes through the buckle and then back into the plate
Bag, it's the same way here. So the
rear plate bag
shoulder straps
Never interface with any velcro on the yoke itself
And you can mimic that same process
with a JPC plate front plate bag and then an AVS 1000 rear plate if you would like a
JPC rear plate bag on here
if that was something you want to do you would kind of only be using this as
Essentially a padded a shoulder pad and you would probably have to mate those up
Running under this velcro here
Or this band here and then just have both shoulder straps on top so you could do it
I don't know how much value there would be in that
I've never felt like I really needed to invest $200 in padding for a JPC
All right
I don't know and I forgot to check if if this webbing is mimicked on the real one
So I'm not quite sure where that comes into play if anything
You do have a little bit of
Cable routing and organization on here. This is some
Opposing one wrap here. So if you've got some comm wires or something that you need to
To mount you can do that. These are just straight webbing
Which just helps keep velcro from tearing away from itself
You could do some routing through there
Like if you had a cattails antenna or something like that, you can run that through there
Looking at the interface again
I don't know how true to reality these are. I don't know if that 3d spacer spacer mesh is there
I don't know how much different the padding is. This is pretty minimal padding like you could wear this under a rock without any issues
If you wanted to
Use other chest rigs with this one thought that I had had I've been having a discussion with another gentleman for a while now
About how to kind of counterbalance a chest rig without necessarily needing to mount anything to the back. I don't know how
Intensive the setup would be or how annoying it would be but you could use these rear straps
To tie into your pants belt, which would keep
Purely front mounted weight from pulling the harness up into your neck
I think that could be kind of a cool idea
If if you needed to carry, you know
Just some radios or something on a chest rig and maybe some mags
And you didn't have a way to counterbalance the back. I think that would work out pretty well
Especially if you could also tie in to your
Trouser belt use these as suspenders and then kind of clip in your chest rig when you need to
Which is kind of what I was getting at in the intro video
And I think kind of what what made me think of that was
Night fighter with his
Fenris chest rig and his his covert covert infantryman
thing that he's that he's his concept that he's playing around with you know, you don't have to have a
Chest rig on here all the time and and it's not
Concealable, but you could you could keep this, you know attached to your pants
Fairly low profile
especially if you had a jacket over or something like that and then you could clip in a chest rig as needed and that would
Kind of fill that gap across your chest, which is you know much more obvious that something's going on there
But you know having having seen this in person now
I'm very much a visual person and knowing all of the different ways that can plug and play with things
I am I'm much more excited about it, and I definitely want to pick up a real one
To actually try with some plate bags and try with the AVS 1000 and a front plate bag and just see how that works
All right
So yeah, that is kind of your intro to the cry
AVS padded yoke hopefully that answers some questions
Hopefully it sparked some more. So I know things to try with this that folks are wondering about
I know
That several people are interested in kind of what plate bags will play with this
so what you need for your plate bag to to cooperate here is you need a
front plate bag that has
inward-facing hook
And then some way of securing your rear plate bag either with the d-ring or to your your front plate bag
You you could again use it as a very overpriced
You know shoulder pad and just run shoulder straps through here, but I really think that defeats the purpose
So you need some sort of velcro interface in there?
To make it worthwhile
Another option would be if you only need a front plate
you can just drop a JC JPC front plate bag on here and then again counterbalance it in the back attached to
Your war belt or your your trouser belt or something like that, depending on how easy you want it to don and off
All right, so play around with this some more
Look at all the different possibilities
Probably gonna try to find somebody that'll make a chest rig that'll integrate with this directly
I think that'd be a cool concept, but we'll see how that goes. So thanks for your time guys
And and sorry for buying a replica item
