WTFIdea/Whiskey Two Four: Spiritus Systems LV119 Overt Hydration Panel

Ballistic Lab
1 follower
Dec 2, 2025
WTFIdea/Whiskey Two Four: Spiritus Systems LV119 Overt Hydration Panel
All right guys, it's time for looking at the WTF IDEA Whiskey 2-4
Spirit of Systems LV119 Overt Hydration Panel. I believe it's a sub $100 product.
Again, this one was sent to me by WTF IDEA, so I didn't buy it. Hopefully there's no bias
implied or intended. All right, it is a zip-on hydration carrier for the overt model. I know
before the overt models dropped, and especially before the Spiritus back panels dropped,
he also had a solution for the Covert, which is pretty ingenious. So if you still have one of
those or you're kicking one around, maybe you've bought both back panels now, give that one a look
as well. It's pretty ingenious how it mounts. If you don't have 119, the cryo video on the
same product will be up soon, maybe before this one. And then for general awareness,
he also has some solutions. I know for the AC-1 to give it moly on the back.
He might have a Slickster solution too, I'm not sure. But he has a lot of different solutions
out there for a lot of different platforms, whether it be back panels or front panels. So
let's get this on the table. If you've seen the cryo video, it's going to be very similar.
It's an almost identical product. If you haven't, when you go see that one,
it'll be almost the same video. So let's check it out. All right, so WTF IDEA Whiskey 2-4
hydration back panel. I already looked at the cryo one. I'm not sure which one I'll post first,
but this one will be a little bit more streamlined. If you've got more questions,
go check out that video. It is a zip-on solution that is very well done. And while the similarities
between the two products are very, very close, he absolutely looks at the host platform and makes
sure that it is optimized for that one. So obviously, Spiritus zippers are different than
cryo zippers. So that's already a given is that it's going to match up to the Spiritus zippers
intentionally. Looking at the zippers themselves, there's this nice zipper tab retainer on the
bottom. So for whatever reason, even if your panel wants to come undone, it's going to stop
that zipper a half inch of movement and it'll be locked in place. So this is on a medium
with a medium e-sappy and backer installed, and it matches up perfectly. Much like the cryo one,
you've got this wraparound panel that will interface with the plate pocket velcro.
I said it in the cryo video, I'll say it here. It's a very solid solution for keeping the bottom
of your back panel secure. It is probably the best method out there for eliminating any kind
of snagging. Like if you're going through windows or climbing over a wall or something and you're
kind of scooting off of it, your back panel will not snag because you have this smooth surface
for whatever that obstacle is to ride off of. You don't have the bottom of a pouch hanging here
that could potentially hook on something. Now that doesn't mean if you're going over something
that's sharp and it has points and stuff that can get in there that it's not going to rip into the
bag, but you shouldn't have any added snag hazard from the pouch. It should be essentially the same
issues that you would have with a slick vest. So in addition to that bottom flap,
you again have the velcro webbing ribbon, in this case, securing method. So the Crye one,
there was a little bit more weaving that you could do. On the Spiritus, you just have this top row
of PALS webbing here. So you really don't have to weave anything. You're just tucking it through
here and then securing right on the velcro field. And you can absolutely get away with that on here
because the Spiritus has so much more continuous velcro continuity.
Like I said on the Crye video, if you're feeling squirrely, you could even just
push the velcro on there. Once you have both sides zipped, it's fairly secure and you won't
have too many issues with that pulling off, especially with hydration in here where most
of the weight ends up being at the bottom. All right, so we'll get this off the vest completely
here. And there's really no differences between this functionally and the Crye one. So you still
have the shock cord. You still have the one large pocket in here with the kind of interesting
approach to a bladder hanger. Your old school camelbacks should be able to engage on the
webbing. The source, you might hang on the buckle. I can't remember exactly how sources engage.
All else fails, you can run some paracord through here and tie off to your bladder.
All right, you still have the hydration tube pass through here and then some one wrap to help
secure that and kind of route it into your shoulder straps. The shock cord obviously can
be removed if that's a concern. And you do have a decent amount of volume in here. I didn't really
harp on this in the Crye one, but if you don't want hydration, it has a similar capacity to the
Scarab pack panel. It's a pretty small pack, which may be a win or a loss depending on your
experiences with the Crye pack panel. And with Spiritus not having a true pack panel option,
you may not even want the hydration. This may suffice for what you need. So it's a solid tool
for the affordable price that they go for. And I highly encourage you, even if you don't have an
overt, maybe you have a covert, maybe you've got an AC-1 or a Slickster or something like that,
go check the website and see what pack panel or back panel options he offers for your vest.
The Spiritus MOLLE panel, you really can't beat the pricing on that. So I don't know if he still
has a MOLLE option for the back panel, but he might. And potentially if you're buying other
stuff, shipping comes into play and it may work out to be similar pricing. But really well made,
very lightweight. There's danglers out there that are heavier than this thing. So it really
doesn't add much to the profile of the vest or the weight of the vest. And it's a good
kind of emergency pocket or hydration pocket if you need it. Thanks guys.
