The GENIUS New Backwash Idea People are Using in Watercolor Seascapes

Collect Watercolor Paintings
41 followers
If you've struggled with watercolor crashing waves, this technique changes everything!
PAINTS
Phthalo Turquoise - Daniel Smith
Phthalo Green - Daniel Smith
Indanthrone Blue - Daniel Smith
Yellow Ochre - Qor
Raw Umber - Daniel Smith
Burnt Sienna - Winsor Newton
Serpentine Genuine - Daniel Smith
Undersea Green - Daniel Smith
BRUSHES
Princeton Neptune Quill size 6
Escoda Optimo Liner size 6
NicPro round size 8
PAPER
Arches 140 lb cold-pressed 9X12 inches
#Arts #FineArts #watercolortutorial #watercolor #watercolorpainting
Forget everything you know about painting crashing waves in watercolor. For years,
I struggled with capturing the raw power of breaking waves until I discovered this
unconventional method completely by accident. While other artists recycle the same methods,
I'm going to reveal a breakthrough approach that allows you to capture the raw movement of waves
without the need for masking fluid, negative painting, or white wash. If your beach scenes
fall flat or lack energy, this is the video that changes all of that. This is the drawing for the
seascape. I'm starting with the sky and dropping in some indanthrone blue and then dropping in
some water to get some fading and blending. In this part of the sky, I'm pre-wetting the paper
so I can work directly wet on wet. This gives a really soft effect. With a few dabs of water,
I can get some blossoms in the clouds. Now I'm mixing up the color for the water,
which is a combination of phthalo turquoise and indanthrone blue. I've dropped in a little bit
of phthalo green. Now this is the part that's leading up to the first crashing wave. I've
slowed the video down so you can see how I'm continuing to work with wet paint.
And now I'm dropping in the paint on the right side so that there's wet paint on both the left
and the right. Though the paint is wet, it will start to dry. So it will cause a back wash
on purpose. Why do artists hate back washes? Well, I'll show you. Here's a quick demonstration
of back washes when I don't want one. So I'm doing a gradient wash or I'm doing a flat wash.
If I drop in pigment or water that is wetter than what's on the paper, you can see this back wash
form. But it can be tricky. Sometimes when you think you've got the same amount of wetness
on your brush as you do on your paper, you can still get a back wash. See, that doesn't look
so bad. But just wait. Here's another example. Nice little flat wash. And then I go back and
I fiddle with it. Here's how they look when they're dry. If you want a flat wash or you want
a gradient wash, you certainly don't want these. And you can see in every single case you've got
hard lines, uncontrolled lines. If that's not what you're going for, it just doesn't look right.
Back to our painting in the use of a back wash that we want. I want you to see the setup with
the drying but still wet paint both on the left and right side of this wave that's going to crest
and crash. I'm taking a brush that's loaded with clear water. Now it doesn't look that way because
it's picked up the pigment that's on the paper. But just wait. That water is moving into the pigment
on both sides of the wave. On the water coming into the shore and on the underside of the wave.
And already you can start to see that that water is moving down and up. So we get the splash of
the waves up and then the curling of the wave going down. Here's a comparison. Right after I
added the water and now after the water has moved on the paper. Now I'm adding in a little bit of
the shoreline while this back wash is still wet. Now I've just lifted a little bit but what that
does is now you're seeing spray that is in front of the land. Normally you'd have to use masking
fluid or white gouache to get that effect. Water is moving into that land because it's still a
bit wet. That's the beauty of this method. The water is working for you. Now I'm going back and
actually lifting and then going back with more clear water to get more control over this back
wash. Again I want you to see it before and after. It's pretty dramatic isn't it? All right moving on
to the next breaking wave. I'm using the same technique where where I want the wave to crash
I have wet paint on either side of it. And while I'm doing this setup take a look at the wave that
I just did. It's continuing to change. So I'm adding just a little bit more wet paint just to make sure
that I've got what I need. And there's a still so you can really study and see what it's like.
And here's the clear water. So I've added water and now I'm lifting. I'm going back to that original
wave because I'm trying to get a little bit wider. See how just dabbing in a little bit of water
really pushes the pigment out of the way. I mean this is kind of an addictive technique.
There's a little bit of a hard edge because the paint was starting to dry. I'm going to deal with
that. See so so lifting a little bit. So I'm smudging that line that I created accidentally
and and now it's looking a lot more rounded. Now I'm just filling in some of the the water behind
the wave and that'll help with the contrast between the wave and the the water behind it.
And you don't have to use a liner brush. You could use a rigger. You could use just a brush with a
really fine tip so you have the kind of control of being able to put down the amount of water
that you want. Right now I'm just putting in some dark value with some indanthrone blue to start to
nicely with the phthalo turquoise. So now guess what's happening. This is the setup for the third
crashing wave and there's a still just so you can get a good look at it. All right time for the
you expect. In wave number four I pulled in some of the raw umber that I had put into the the water
behind it so I tilted the board so I could control where I wanted the water to go. So now I'm starting
to get that crashing effect with the water. So I discovered this really by accident. I was getting
ready to teach a class and practicing some face-on seascapes where you're just standing on the shore
looking at the waves coming in you directly no angle like this composition has. I laid down some
cobalt blue and then I came back with some yellow and I got a backwash. I got a beautiful backwash
and I was stunned. So I thought could I use that with clear water? What would that do? And so I
tried it and it was really stunning to to see what water could do it with a technique that
it tends to be the bane of watercolor artists always complaining about backwashes and blossoms
and blooms and you don't want them you don't want them you don't want them. Well sometimes you do.
Now now this is a little out of focus but I wanted you to see with just a little bit of water
because that pigment's still just a little bit wet. It's still making a shape. You can you can
see it better now that I've pulled the camera back. A few more touch-ups on the waves and again going
back and adding in some deeper values so you can see the shadow that you'll see in a wave.
It can be tricky because depending on the light you might see shadow, you might see light filtering
through the wave, you might see light at the top of the wave and shadow on the bottom. The crashing
water itself can cause shadows. So for the sand I'm using a combination of yellow ochre and burnt
sienna. I'm alternating between the sandy color and some green color which is mostly diluted
undersea green because in the distance the vegetation is going to sort of blend in with
the landscape. Now that's a little bit of shadow green on top of that.
These are the shadows on the foam. Dropping in some dune grass. This is serpentine genuine
with some yellow ochre and making the shadows with undersea green. The shadow color on the sand
is a combination of phthalo blue with some raw umber. I definitely had to practice to get this
to work right. I sure hope you give this a try for your seascapes especially if the detail of
painting a crashing away seems overwhelming. And start small. Start on something that doesn't
matter very much. Do it in your sketchbook. That way you can practice and you don't have to show
anybody.
