The Cheapest Possible Way To Put Skirting On A Mobile Home !

My Brother Donnie
257 followers
269 Video Views·Nov 28, 2025
This Underpinning Didn't Cost Us A Dime!
Okay, we're out here, guys, this
morning. We're raking out from
underneath this trailer. We're going to
uh get some plastic laid down. You know,
in South Carolina, you got to have
plastic underneath them. So, we're going
to get some plastic laid down. And then
we're going to start putting vinyl under
pinning under it. Same stuff I took up
over at the other place. I'm going to
start laying around it and get it all in
there and get it installed
and uh see what we can do with it. We're
leveling everything out where they drug
the axles and all that up from
underneath it. So, we'll uh we'll see
how this works out. Basically, we're
putting that plastic down for a vapor
barrier and for uh weed control, trying
to kill all the weeds off. And uh he's
trying to smooth it out there while
while he can,
while it's easier without the uh without
the skirting on it, obviously.
be easier to put the plastic down first.
So, that's what we're going to do. Get
it all smooged up and looking nice, and
then we're going to start laying plastic
under it. So, uh we'll come back when we
start laying the plastic.
Okay, here we go, y'all. We're getting
it done.
We got these little sod stickers
that we put down
where we got to cut it and splice it,
all that good stuff. So, we're 10 foot
in here. This first pier pillar or out
here, but we're on the outside of the
trailers. 10T there. That's about
actually eight.
This one's going to be a little closer.
So, we'll get it.
Then we'll do that one. home. It's going
to be a little farther apart it looks
like. Then we'll do those.
We're going to put a uh put plastic
under all of it. Right there, ladies.
The plastic
we're using 6 mil by 100T black.
It's going to take us about uh you see
what's on that roll. About a roll I
guess to do it. But I had half roll. So
we brought a roll in half. used the half
row first, kept the new stuff or we're
going to keep the new stuff. So, we're
just easing through it. When we get
done, we'll go around the outside, cut
the excess off, but we still got to nail
that uh trim work or not trim, that J
channel down underneath the underneath
this lip. We'll have to nail it on top
of it. So, it should hold the whole
perimeter down.
We're making sure we get all the the
wood and all out from under as we go.
And uh he's raking it all back and all
that good stuff under it. So, we
shouldn't have any foreign material in
it. This ain't my normal guys. I'm
running one of my buddies this week. So,
we'll uh
getting that done. So, we're overlapping
about a foot or so.
Okay, y'all. He's working on the last
piece up there.
We've got 90% of it. He's got the little
uh oscillating tool down there cutting
off whatever roots and uh junk that he's
finding little twigs and
mainly roots that stuck up in there. Um
so we're getting all that stuck. We're
putting plastic over it for a vapor
barrier and it's going to kill all the
vegetation and everything under there.
No sunlight, no no light, no air, no
live.
So, we're going to kill it all off and
uh we're fixing to put the skirting back
up underneath it. We've got all the
skirting laying over there.
So, we'll put it back. We might have to
cut a lot of that skirting to go around
there. So, we're going to start at the
back corner and just go all the way
around it one time. And uh hope that we
got enough. We should because it just
come off of where uh where it was
sitting. It just come off from over
there. So, we're going to get it and
just keep right on getting through it
here and see what we can do with it. So,
we want to bring y'all back and show you
that we're putting plastic under all of
it because if you don't show every
little step, somebody will say, "Oh, you
didn't do it. You didn't do it." So, we
did it. We got it down. And, uh, I'm
fixing to crawl back under here, help
him finish this up.
But, we're getting there slowly but
surely.
So, we're cutting around all the ties
and we're leaving it long. It's sticking
way out here. You can see we're going to
put our our um
J molding around it. Then once we do
that, we'll cut off the uh excess. So,
should be good here shortly. We'll let
you know, though.
Okay, y'all.
Started putting this back up. We around
here on the back. I'll show you what
happened here.
It's like a big puzzle.
This line
right there
simulates number one. Well, number one,
don't go there.
It's too short to go there. So, number
one
goes um
number one goes down here.
So, we went 1 through five or seven or
something
through 12, but 13 wouldn't fit. So, we
had to jump to 85.
85 through
96. That fit,
but then they started getting too short
again.
So, I had to jump back to 81. go 81 down
to here to 84, but then it wouldn't fit.
So, I had to do 79. Now, I had to do 80
and then 78
and then 83 and then 74 and then and
then 32 because it jumped up a lot. So,
I went 32, 31, 28, and then it got low
again. So, I had to jump back up to 33,
but then it was too low. decided to jump
back to 25.
So, it's like a big old puzzle here.
After we get all this on here, there's a
trim ring that goes over all this. It
snaps down here. So, it don't matter
what the top looks like.
But, I've got the back done. Um, I still
got to come back and cut the plastic
off.
I got lucky on this side of the house.
This side of the house is sitting lower.
So, all the tongue
the tongue uh uh plastic should work.
So, I've got that.
But there it is looking down the side. I
got it all got it all done. Um I've got
to put about a foot more plastic. You
see the plastic there? I thought I might
be able to use the trim. That's why we
didn't do it. But I'm going to crawl up
under there and get the rest of that
down. That's why I haven't done anything
on this side yet.
And then none of the front's done cuz
all this stuff I believe is going to
have to be cut, every piece of it. But
that's fine.
That's why I waited on the front. I
wanted to make sure it was right. I used
all that small stuff on the back to make
sure I could do what I needed to do
there. And then uh I'm going to uh we're
going to come back down it again here
and see exactly what we can do. All
these are big pieces now. It's all I've
got left. So we got to cut some up and
uh see if we can get them. I believe
these two
will go they'll go here. But they might
also go down here. So let me go down
here try to put them in real quick and
see. I think these two will go in down
here where you don't have to cut them.
keep you two less so you don't you don't
have to cut
these.
>> Yeah. So, these two will go right here
where we don't have to cut them. You
see? So, that'll save us a few minutes.
Um, but it's a pain to figure all this
out. So, you got to constantly be
looking at all these and see these have
little tabs on the bottom. And I don't
have no way to make that little tab
there. And that's what holds it in the
bottom down there. I think this one
might go here, too. Yeah. So, he's got
three that he can use there. But, it's
32 in pretty much all the way across the
front of it. And we'll have to cut all
these small ones down or all these big
ones down to 32 to get them to go.
But, uh, that's where we're at.
Um, killing them. Killing it. Getting it
slow and easy. Ain't that right, French
fry?
>> That's it.
>> So, this French fry is my one of my new
workers. You'll see him on a couple of
these videos. So, uh, we'll get to it.
Don't cut that. Don't cut that. You got
to cut the other side. Huh?
>> You can only cut the top
cuz them little teeth,
>> right?
Okay, y'all. This trim piece goes up
underneath there.
Goes under there.
Hang on. And then you got to pop it in.
It's a pain in the ass to get started.
Sorry, y'all.
Get in there.
Nope. Nope. Got to get it down in there.
There you go.
Oh, there it is. Now the whole thing's
got to come to me. Got to bring it down
here and lock it in place. Hang on. Hang
on. Okay. Come on. Whoa.
>> Back a bit.
>> Nope.
Need just to get that lift to roll.
There you go. There you go.
So, that's how it is before
right there. And then you get it locked
in
and it looks like that. So,
we're getting it locked. We still got a
few more put in, but we're getting
there.
So, y'all, we'll come back to you when
we get some more in.
So, there's the back of it.
Got the back done.
It's pretty rough.
Got the back.
We've got this side
and we got the whole front.
done.
So
that was our job for today.
Get the underpinning under it. So we got
it
plastic and underpinning
about 10 hours
something like that.
So we're going to pack up and go to the
house. If you like what you see, give us
a thumbs up for filming. Subscribe to
the channel if you hadn't already, and
we'll catch you on the next one.
