Building Nice Brick Steps For Our Mobile Home

My Brother Donnie
257 followers
59 Video Views·Jul 4, 2025
We've finished making brick skirting or underpinning for the trailer, now we're going to make a nice Brick landing on the front... this is how we chose to do it.
Okay, y'all. We're going to put a We're
digging in a u
for a uh front porch. Basically, we we
stubbed these out for the porch where
they'll tie into that uh foundation
or whatever you want to call it, brick
wall, skirting, underpinning,
whatever the word you want to use.
Um they'll tie into that and it'll keep
it from separating. So that's basically
what we're trying to do there.
So we're going to make it about 7 ft
out,
6 and 1/2 ft wide, something like that.
6 ft wide, but you got copper bricks,
too. Whatever you want to count that as.
But that's what we're doing. We're going
to dig it out, fill it up, and uh
concrete it in. So hopefully it'll look
pretty good by the end of the day here.
So, here we go at it.
Okay, y'all. So, we dug a hole.
We put up a steak.
We got to put one up over here. I'm in
the way.
So, we got to get something started
there cuz it's got a lot of gravel on
top. So, we get a hole started
and then we uh put us a steak in there.
We got a steak over there.
And then we drive it in.
We got to get down to that halfway soft
stuff. You know, this used to be a U
driveway for the uh
liquor store. So, liquor store used to
be right there, but we moved the liquor
store. So, we didn't move it. Somebody
else moved it and we uh we bought the
problem. So, we got those
um teeth out there to grab a hold of it.
Got to put this in here like so. Then we
got to get boards back on it or wood
back on it. You just see to me laser
the um
So, I take a laser and lay it up against
the brick though. We shoot it out here
and we'll know about where it's at,
about where we need it. And um then
we're good. So, stick that back down in
there.
We use this as a packing rod.
Pack the dirt around it. We get good at
it here. We're going to pull a string
line.
We're going to use that right angle
there to make sure we're at the right
angle. That means we're straight. And uh
bada boom, bada bing, there we have it.
So, that's what we're doing. All this is
feel broken bricks and stuff like that.
We're putting it in there so we don't
have to pay for it to go to a landfill
and we're using it for fuel. We don't
have to buy field material for this.
So, we're going to do that and uh see
what we can get up with here.
Okay, y'all. This is the hard part.
Getting that line level across there.
Basically, you've got to figure out how
to level that line up. So, we had to get
creative and find out some
something we could stick in the brick to
tie our string line to the side and not
let not let it.
He's scared of a daddy long leg.
So, we had to get up and create a way to
hook to the brick. So, we did that on
both sides. Then, we come out here and
we're using a level
to level the string.
It wouldn't be nice if we had to level
line or whatever level whatever, but we
ain't got it. We've got them, but we
ain't got it with us. So, it's all that
kind of stuff.
Then we're going to make another one
here.
And we'll have an X then. And then we
can do our right angles here. And make
sure we're straight there and straight
here. And then we should be good to go.
Should be.
I don't know if that's correct or not,
but we should be.
So, that's what we're trying.
We hope.
And uh if we get it right, we'll come
back. If we don't, we'll dig another
hole.
So, that's basically what's going on.
We're still trying to get our line
straight.
Okay, y'all. So, we got our footing in
here. And the trick is with a footing,
make sure you have a flat bottom. cuz if
you got a V bottom, it's just going to
drive it deeper. But what we're trying
to do here is give this thing plenty of
footing to where it don't want to flip
over one way or another in such a short
run. We probably didn't need it that
wide, but we did it that wide anyway.
So, we got that going good. And it's
about 5 in thick in most spots there.
So, it's pretty thick footing. We got it
all the way around. So, now we're going
to start. We're going to give it a
little bit to dry up and then we're
going to start laying bricks around it.
So, we'll lay uh
we'll lay six courses of five courses of
brick. Five or six courses. I ain't
decided yet. Probably five.
Maybe six. Six courses of brick. And
then we'll uh
then we'll put a concrete top on it. So,
that's what we're going to do there and
get it all done and get it looking good
and we'll be good with it.
So, the process goes, you cut brick and
you make mortar. Cut brick and you make
mortar and you cut brick and you make
mortar and uh you hope something comes
out of it.
That's a MK Diamond tile saw. I bought
it used. We used it just for cutting
brick. We might cut some tile one day,
but as of today, we've used it solely
for cutting brick. This is what we're at
now.
We got our line going that way. We got
our line in over there. We're fixing to
make a match here in the middle. And uh
that's how we're doing.
So hopefully we'll get it done.
Okay y'all, we're up five courses here
on that side. We're starting to fight
the fifth course here. We're at the
third course here.
Got it about halfway filled in. So
we got plenty of sand over there to fill
it in with.
But we're going to get all of our brick
work done and throw the rest of our
bricks in there and all that good stuff.
Let's get rid of them. So, I'm not
paying to get rid of them at the
landfill.
Um, so we'll have them right here on
site, but we're getting close.
Getting up there.
Let's get right on climbing up the hill
and uh we'll be getting there.
We got 20 bags of concrete. I think
that's going to do the top. Not sure
yet. I'll let you know when we figure it
out.
But we're getting there slowly but
surely. That's uh one, two, three, four.
It's about six B uh
buckets of mud or Portland cement and
sand or
um
um h why am I not figuring out what
that's called in English? um
drawing a blank.
But anyway, that stuff, six buckets.
We're starting on eighth, seventh, and
eighth bucket. It's called messcula in
Spanish. But um
uh mortar mix. There we go. Mortar.
Mortar mix. Mortar mix. We make our own.
It's Portland cement and sand.
It's a lot cheaper that way. 14 cement.
It's about $20 a bag and you get about
uh
six, eight, maybe 12 14 buckets out of
it. Where if you buy a bag of mortar
mix, it last time I bought something, it
was about $6 a bag and you get um maybe
a buck a bucket and a half out of it.
So, um, that pile of
it's over here. And I'll show you that.
Can't get around it. Better go around
the other way.
I had this pile of sand delivered. This
is u this is mortar sand, what they call
it, in this area. You can see we done
took some of it out there. But I had
this pile of sand delivered. That is a
uh uh dump truck load. Full size dump
truck load like a blue max truck load.
Um
that was uh
that was 200 I think $250 delivered. So
you figure uh I'm only going to use
maybe to do all the bricks on this house
and that front porch. I used maybe uh
I don't know maybe four wheelbarls, five
wheelbarls full of sand. But I bought
that because I knew I had to fill that
in. Also, I want to regrade here a
little bit. And I've got a couple big
holes in the back back there I want to
fill up. So, trying to knock all that
out at the same time and uh you know,
cut down on delivery charges. So, we
went ahead and bought that. Got it over
with and done. The San Corey is just up
the street about maybe five miles. So,
it was pretty reasonable to have it
brought in. I could go get it with my
dump trailer, but
last time I did that, the guys at the
Corey didn't know what a half ton pickup
truck was. They they put um
I think I was weighing about 30,000 when
I come out of there on that half ton
truck. So, with this trailer behind it,
I think 20 28,000 27 28,000 right at
30,000 lb. So, it was like, uh-oh. And
then the trailer wouldn't dump. They had
it level with the top full of sand. So,
I had to take my excavator and drag it
off and all that good stuff. But anyway,
we made it back with it. But, I still
had to go get two loads. So,
it's uh it's easier just to have it
delivered sometimes.
But, they're going like crazy on this
and trying to get it done. And we'll get
back to you here in a little bit. Okay,
y'all. We got it up to height.
There's where we're going to have it.
This relief here in the front's going to
be a step. We got to bring another one
straight across here. We got to fill it
in first.
So, we're going to start filling it in.
We got old brick and block. It's busted.
All these little chunks and pieces and
half bricks and all that. We're going to
throw that in there. Start filling it
in. And uh we got a little bit like
stuff when we did the the actual rest of
this build. We got little pieces and
broke up broke up pieces. We're going to
pick up all that stuff, put it in there
with little pieces of concrete and
stuff. We don't Right. There's a big
spot where we was cutting. We don't want
anything that will uh
that will uh decay. So, we don't want to
leave anything in there that we don't
want to put sticks or wood or anything
in there because that will break down
over time and leave a void. If it leaves
a void on us, that will uh that will
mess us up. So, we don't want any like
trash or anything in there. But anyway,
we got to do that and then we'll get
back to you.
Hey, y'all. This is look looking at it
from the street up here.
Still dumping broke brick and broke
a piece of concrete, all that kind of
stuff in there. Trying to get rid of all
of it.
Get rid of most of it here and get rid
of all these cut pieces up here on the
saw.
So, we could use all that, but it ain't
worth saving it. I mean,
be better off it is fuel and uh them
little half blocks ain't as good to
save. They take up 10 times more room
and just a pain. So, we're getting it
cleaned up here. We're going to start
hauling sand
and uh
we're going to start hauling sand and
then we'll uh start hauling concrete.
We still got concrete on the truck.
That's next. Okay, y'all. We got it
filled in.
We're reinforcing our wall here. Tapping
it down. We'll do the same thing on this
side.
Reinforce it. Tap it in. And uh that
will uh
that will get it um steady, sturdy,
whatever. Reinforced so it won't blow
out when we start putting all the weight
on the inside. We ain't got it packed
down tight against some walls yet.
That's why we got extra there. So, he's
going to go around and pack it, lock it
in place, and then we're going to spread
that out in the middle. Pack it, lock it
in place, and then we should be getting
somewhere. So, we got to lay two or
three courses of brick right there in
the middle
um for that step to hold the concrete
back. And then we'll probably pour that
front little spot there and see what we
can do with it.
Ron, we're going to have to cut this one
right here on these bricks. Mhm. It's
105° today. Ain't working. We uh we
ain't trying to kill them. Yeah, we're
trying to take it easy, people. It's
105°. So, uh something like that. We'll
uh this one's getting long. Anyway, give
us a thumbs up for film it. Subscribe to
the channel if you hadn't already, and
we'll catch you on the next one.
