The Biggest Glass Platter I've Ever Attempted - Glassblowing Demonstration

Art Creation
8 followers
Hey everybody, welcome back to the studio. Today we're going to be attempting to make an extra
large platter for you guys. I haven't tried to make one this big before and I think you'll be
really interested in the final results, but let's go ahead and get into the shop we can go ahead and
get started. So my brother Luke is going to pick up one of these colors out of the box right here.
We've preheated this big chunk of glass color to about a thousand degrees and now we can move it
over to the glory hole so we can start to become molten and we don't have to worry about cracking.
Meanwhile I'm going to take my blow pipe and get a little bit of glass out of the furnace.
This glass furnace right here holds all of our clear glass. It stays on 24-7,
it runs off of natural gas and air, and it holds up to 700 pounds of clear glass.
So I have a small bit of glass here and while it's nice and hot I'm going to use my wooden tool,
this block tool right here, to shape it into a nice kind of q-tip looking shape.
This is a perfect shape to blow a bubble into. So now I'm going to do what we call putting in
the starter bubble. I blow into the pipe and cap it with my thumb. The air pressurizes from the
heat and shoots out of the tip. And meanwhile Luke's been heating up that chunk of glass that
we got out of the color oven. This is a color called lagoon. It's like a dark green kind of
blue transparent color. So we're setting up for what's called a color overlay. I let my bubble
cool down, my brother increases the temperature of his glass, and then we can attach it onto the tip
right here and I'll be able to spread it across my bubble creating a layer of like really nice
colored thick glass. So while that glass is nice and hot I need to move very efficiently to spread
all of that glass across my bubble before the bubble starts to heat up. Remember I said that
I needed to cool down the bubble so it's nice and solid and I have something to push up against.
If it was too hot then whenever I press in right here it would just collapse. So I go to my
marvering table and while I have a moment before everything gets too hot I try to push all of that
glass over to where it completely covers the bubble. That sucks. Yeah. I heard there's a Wednesday market.
There is but... And now that we have it completely covered we'll add a new layer of glass and we'll
start to inflate it a little bit. Yeah. Daddy doo doo. People bought things like that day and stuff but
it was hard to tell if it was like a couple big orders that day. My shells I had them for like...
This tool that I'm squirting with water is our newspaper tool. It's about 10 sheets of newspaper
that are wrapped up and soaked in water and I can use it to kind of manipulate the flow of the
bubble. So I'll tell Luke to blow and then as he blows I can move the newspaper around and change
the direction the bubble inflates in. So now we're going to prep this to get our final gather of glass
out of the furnace. So I let it cool down to a nice medium kind of thousand degree temperature
and we're going to put it in the furnace to get our final layer of glass.
Yeah mom hates steely dan because dad loves steely dan.
Right you like Billy Joel. Don't bring up Billy Joel. Yeah dude it's really funny when I used to
give Ernest a ride to school every day in the morning in high school. Uh yeah maybe.
He just sounds like the creepy guy from Family Guy. He's like hey.
This wooden tool you'll see me use a few times and I used a smaller one a little bit earlier
is called a block. They're made out of cherry wood. They live their lives in water and they're
really good at rearranging all of that clear glass to a nice shape to where a bubble will
want to inflate in. You can blow. So in a moment you're going to see me use the marvering table
again. That's this big metal table. It's a nice thick piece of metal that really cools the glass
down and shapes it at the same time. It's one of my favorite tools to sculpt glass.
So we've inflated the glass to a nice kind of medium size and the plan is we're going to add
what's called a wrap to it. So I'm getting a little bit of clear glass out of the furnace
and I'm going to use this to pick up a chunk of white glass out of the preheated oven. Same one
that we got the other color out of before. So now my job is to get this white nice and hot and I
want it to turn into a wrap. So we're going to wrap this white around it and create kind of like
a spiral that goes all the way down the piece. Who knows. And that went on great. You know sometimes
those things can go really badly if the glass is the wrong temperature. If you know the base is too
hot or if my glass is too cold. So that wrap went amazing. And now I'm going to go back to
the marvering table because we're actually going to set this up to go into an optic mold. Which
is kind of like the pumpkin mold if you've seen the one of the pumpkin videos we did before.
It's basically like a cylindrical kind of aluminum mold that has ridges on it. It's kind of in the
shape of a star. You can see the top of it right there. So I'm going to lower my glass in after I
got it nice and hot and I'm going to blow almost basically as hard as I can. And that's going to
really expand it into those little grooves and it'll give us a bunch of ridges. So the mold went
great. That was awesome. So we're looking pretty good so far. And now we're going to have to worry
about kind of inflating it a little bit and we want to squat it up. I want it to be kind of nice
and brown. And right now it's really long. So now we're getting ready to do what we call putting in
the jack line. In just a moment you're going to see me take a tool called the jack. So like a
pair of big tweezers. And basically what we're going to do is we're putting a small incision
right off of the tip of the pipe. And this is the area that I want the glass to break on
whenever we transfer it to a different pipe a little bit later in the process.
Yeah blow. Sweet man. Okay. So the jack line went great. You know we've got a nice kind of
tight line right there. It should break off almost perfectly. And now we just worry about
inflating it to its final size before we do the transfer. When I come out can you crack that door?
I'll need it on this one. I need you guys. I need to go to the gym dude.
Oh. No it's okay. All right blow hard.
Off. Okay. All right. You can paddle.
Yeah just just five pumpkins face them a little bit.
Because it was like 500 bucks. Oh really? I've done a few more. It was like 550 and
there you go. So now we've got some pretty good volume and we flattened the bottom of it too.
So now I want this to hang on the wall so we need to put a foot on it. So my brother Luke is going
to get a little bit of glass out of the furnace and he's going to bring it over and we're just
Okay that looks great. We're going to roll with that. And a punty please. Big punty.
All right so adding that foot went really well. We've shaped it into just the right
shape I want it to be in and now we're going to prep for that transfer I was talking about before.
So my brother has a pipe in his hand with a small bit of glass on the tip. It's going to work kind
of like glue. It's called the punty rod and we've attached it to the bottom of the piece and we're
almost bullseye in the middle as I can. And now all we have to do is add a few drops of water
onto that line we wanted to break off on and then we'll give the pipe a tap and we should be good
to go. So unfortunately this one actually broke on us. You know I took a really long time to get
it off of the pipe and onto the punty. We kind of sat there for way too long. I think my jack
line could have been tighter. There are a lot of things I probably could have improved on but when
we put it back into the heat it just split. It's reminding me of a broken bladder.
All right we're just gonna get rid of it. No we'll just kill it.
No I'm not trying to do a big explosion in here. So this was kind of a bummer. You know I was really
excited about how it was looking but you know one of the things about glass is you know you mess up
one or two little steps and it can all kind of go sideways in an instant. So it was a pretty big
bummer in the moment. I was pissed but that's how it goes. You know we just gotta try to move on
and get on to the next thing. Sucks dude. Good for nothing. That's how it goes. That's okay.
You know we'll try again soon. Hey guys so I just kind of wanted to come here and talk to you guys
a little bit about what happened in the video. You know obviously the piece kind of went south.
Everything broke and that happens in glass. You know it happens a lot. It's a really not like a
lot I guess but it's a very like kind of like high failure kind of art form and things are just
over in like a second and it can be super frustrating. I get really really frustrated
when I'm in the studio sometimes. Sometimes more than frustrated you know and I just wanted to
come on here and say like for any glass people out there or people who are trying something new
and you know they're not exactly flowing with it and things are kind of fighting them.
You know things like this especially new environments and new kind of things that we
try in life can be really abrasive sometimes and I just kind of wanted to come on here and
talk about some of the things that I've learned from like my failure and glass blowing and my
failure and you know a lot of the other things that happen. We all fail right but you know glass
has taught me a lot about being resilient and like resilience and getting back up and dusting
yourself off and trying again. You know especially when I was younger I used to really let this stuff
affect me like it really really affected me. I would be you know I've had a lot of times in my
life where I've had to completely just start over like what career am I going to like end up with.
Hey Curtis stop the cat's bumping up you got to get out of here bud. You know we've all probably
gone through that sort of same stuff right like I got to start over what am I going to do for a job
what am I going to pursue in life like you know a lot of things like that and there were a lot of
moments where I was learning to be a better glassblower and things just weren't going my way
and I felt like I needed to start over and you know starting over is difficult especially when
you get to the point where you've done it like so many times right and I think especially in my life
I hit a point where I was just tired of starting over and I really had to push and really try
hard and glass is where I landed when that was going on and you know the glass and I mean a lot
of things in life right but the glass especially I found for me it really humbles me right like
some days I come in and everything's great and I make everything like it's been like that lately
I've made made everything without breaking anything for like the last couple of weeks
and then I had a day like the day we recorded right the platter broke we did a second piece
afterwards that thing broke and you're not going to see that one because that one like horribly
failed I'm not willing to post it on the internet but you know it's it's really difficult especially
in the moment when you're so fired up and and things just kind of like fall flat on their face
it's really hard to pivot right and just be able to like say nope I'm not going to let it affect
me I'm going to kind of just push forward right I always struggle between like do I kind of like
sit on this for a little while and really think about the mistakes I've made and let it kind of
sink in and then kind of retry later or do I get back up and just kind of like go at it almost
like nothing happened right that's something I get stuck in still kind of often you know it's
difficult to to really like be able to turn 180 in the moment and go but I but I know that that's
the best thing to do right especially when you know it's just broken glass like all glass breaks
right it's just how that's that's life right things are gone in a minute and then I think
that's one of the tough parts especially about being human so you know I I just think that the
glass you know glass blowing and really learning through failure which is what I've done in my
entire life but really it's been my glass journey has just been you know trial and error more than
anything it's it's really taught me to be resilient and I it's something that I carry with
me you know when I'm not in the glass studio or at least I try to right none of us are perfect
but but yeah you know there's like I said before there's a lot of things that I've learned about
my life and who I am through making art and through glass blowing just as like a form
and learning how to become a better artist and glass blower so you know some of those things I
think translate into life the lessons that I learned in the studio and I think you know
hopefully somebody out there especially new glass blowers we've been getting lots of messages about
like new people learning from the channel and stuff which really just warms my heart it's crazy
like I'm just I'm just a guy I'm just having fun man I'm just blowing glass and having fun and
trying to sell some art you know and it really makes me feel happy that like people can come
and find my videos and learn something even if it's not related to glass blowing and it's about
life and uh and things like that even if you know even if you're just watching to relax and
kind of hang out I just I appreciate all of you guys and um the channel's done a lot for me and
it's really surreal so I like to I want to do more of these talking videos and stuff but I
I want to come on here and talk to you guys a little bit more about life and art and things
like that so um you know so stay strong you're trying something new keep trying don't let it
knock you down and even if it knocks you down just get back up you know you can do it just get back
up so um keep chin up do your things holidays are tough uh you know so try to get through the
holidays together um hope you guys have a good time with your family and everything Thanksgiving's
next week um so I hope everybody has a good Thanksgiving if you're stateside um but yeah
thanks for everything you guys and um I'll see you in the next video be safe out there
