Making a Murrine Vase - Full Glassblowing Process Demonstration (1)

Art Creation
8 followers
Hey everybody, welcome back to the studio. Today in the hot shop we'll be making one of our marini
pieces for you, and I'll be there every step of the way to explain the entire process. But first,
go ahead and make sure you're subscribed to the channel, and let's go ahead and get to the studio
and we'll get started. So this is our pattern for today. This marini pattern is going to consist of
a lot of blue, a lot of white, and just a little bit of green. We've got these big windows of blue
in the middle, and we're going to lay out our little marini pieces, these little discs that
I've created before we got to the studio on this little plate. We'll then start to heat it up,
we'll fuse it together so it's nice and flat on our plate, and then we'll be able to roll it up
on a blow pipe and we'll have our pattern established. People make different marini
patterns in lots of different ways, whether it's more lines, bigger windows, different colors,
things like that. So I've kind of been messing around with different ways to make this so that
we get different patterns. This is a new one for me, so we're kind of testing it out today as well.
So we're going to load it into this garage. I'll then go and turn it on, and we'll let this
preheat for about 45 minutes so that it's nice and hot. So when we put it in the glory hole,
so that it can get even hotter and become molten, it won't want to crack or break on us.
So this is my brother Luke. He's going to pick up this plate that we put in there,
let it get preheated, and he's going to move it over to our reheating furnace that I just lit
a little while ago in the video. And then we're going to start to heat it up so that it becomes
nice and molten. We'll start to squish it together so that it starts to eliminate the
gaps in between, and we have a nice flat plate of our pattern. Cool. Good to go.
Yeah, I know it's supposed to rain. We'll see.
That's all he was doing. I was like, oh no, dude, that sucks.
Yeah, you were saying the audio was weird.
Okay, so I won't really, we need to get it off the plate because it's just going to keep
sticking. Yeah, it's here. Okay, there we go. Okay, we'll do one more squeeze and I'll make
my collar. Uh, and then just little heats after that. Really expensive, but yeah, we got a
discount. So here in a moment, I'm going to make what's known as a collar. Like I kind of mentioned
a second ago, I've got a pie divider right here that takes a measurement of the length of my
pattern. And that'll tell me how round I need for my collar to be so that we can roll this up into
a perfect cylinder on the tip of my blow pipe. So I'm going to get a little bit of glass out
of the furnace right here. I'll blow a hole straight through it so that there's a straight
shot through it. There's a hole on the end. I want a hole in the glass. And then I'll use that
little ring on the end of the pipe to roll up the pattern. So I have it on the tip of our pipe
and here's our collar. So I've got a small amount of time while the glass is really hot to really
make this the perfect size that I need it to be to do our little roll up here in a second.
So I'm going to compress it with our newspaper tool. I'll roll it on the marble for just a
second, make sure it's the right size. And if I did my job right, we can go ahead and roll it up.
All right, that went really well. I didn't finish connecting it because I want to make sure that I
get a nice flush connection. So I'm actually going to pass this to my brother here in a second,
and I'll be able to close it up with two tweezers on the outside of the bench.
But first, we're going to brush off any kind of kiln wash that we picked up from the plate
so that we know that we don't have any debris on the glass anymore,
Yep. All right, flip. Okay, you take it to the heat. I'll take it from you. It's just me being
lazy. I should have... All right. So now that our pattern has been made into a full cylinder,
we can work on eliminating the gaps that are left in between the pieces of marini.
So I'm going to roll this on our marvering table quite a few times. We'll press down and push it
around a little bit so that we can make it nice and smooth on the outside and eliminate all the
I do stuff wrong in these videos, and other glass blowers are like, what are you doing?
That's just a walk on me. So now we've gotten rid of most of the bumps and the holes in between the
pattern, and what we're going to do is called a termination. So we're getting rid of a little
bit of glass that's on the tip of our pattern so that we can encapsulate it and close it off so we
air. Just a moment. All right. You can blow. All right. Off. So the next step is for us to get a
gather of clear glass on top of this. So we're going to let it cool down to about 1100 degrees.
You can really see the colors here. And then I'm going to submerge my glass into the furnace and
we'll cover it in a layer of 2000 degree glass. Once we get that last gather of glass, we'll have
all the materials we need to make the piece and the actual glass blowing can start. And just a
little bit of information for anyone who doesn't know about this furnace or hasn't seen our channel
before. This furnace houses all of our clear glass. It's 2100 degrees on the inside, and it
holds about 700 pounds of molten glass when it's full. We leave it on 24-7, 365. We never ever turn
it off unless it breaks so that anyone can come into the glass studio and blow glass at any time,
day or night. So that was a pretty good gather. And now the inside of my glass is quite cold. The
outside is very hot, around 2000 degrees that glass is. So what we're going to do is I'm going
to use this wooden tool called a block to rearrange that clear glass while it's nice and hot before it
starts to cool down. I'm driving and I got our child in the back. The whole time he's like,
dog! He's trying to help. That's so sweet. And so I come, I'm like on this road and I hear all these
other dogs like barking. Sure. And I'm looking around and I can see all the dogs like at the gate
stuff like that. And they're all riled up. I was like, okay, like here's a sign, but right. Something.
That's really funny. So now we're going to start to inflate the piece. I've got my newspaper tool
right here, which is about 12 sheets of newspaper that's folded up and soaked in water. And here in
just a moment, I'll call for air, tell my brother to start blowing through the pipe and we'll start
to inflate the piece. The wet newspaper slows down the expansion of the glass. You know, the
bubble is always going to take the path of least resistance. So any area that I cool down is going
to start to slow the expansion and any area that I don't touch is going to start to kind of let it
inflate more because it's still nice and hot. The same thing kind of goes for this marvering table
right here, where I can roll it at this angle and the metal table cools down the glass on that flat
plane that I'm creating. So the back area is going to start to puff up whenever I call for air in the
future.
So this move right here is called putting in the jack line. The tool in my hand is called the jacks
and we're establishing a small incision right off the tip of the pipe that's basically going to be a
spot where we'll end up breaking it off of the pipe a little bit farther down in the process.
A little bit later we're going to have to transfer this to a second pipe then it'll flip the piece
over and that's going to be this line right here is going to be the line that we break it off of
this pipe on whenever we transfer it to the next one. All right, you can blow. All right, off. Hey,
what's good? Good. Cranking away. Yeah, thanks. Yeah, it's going according to plan so far but I'm excited.
So the plan with this piece is for it to be a little bit of a wider flatter shape. So I'm going
to take these cork paddles and kind of flatten it. My brother will flip the piece. I'll continue to
flatten and we'll keep squishing it until it's the right kind of flatness and the right shape that I want.
Flip. Flip. Yeah. Smokey. Yes. Sure, I bet. Yeah, I was happy when I saw you on the schedule.
Cold working. Last one. What's going on?
Oh, really? We'll just do the bottom. This is great. I'm glad he's sticking to it but it's
that's tough, you know, that's really tough. Yeah, that's awful. Just just in like in life
in general, you know what I mean? That's that's tough not being able to use your hands.
Okay, I think this looks pretty good. So the basic shape of our piece has been established
already but now we're going to have to transfer it to another pipe like I was talking about a
little earlier. This pipe my brother has is going to be the new pipe. We call this a punty rod.
So he's going to make this little punty which is a little bit of glass that's on the tip of
his pipe right here. It's going to act as a little glue bit for us to do our little transfer with.
So he's in a second going to roll this on our marbering table and he's going to shape it up to
be a nice little kind of q-tip shape and we'll be able to attach it to the bottom of our piece,
break it off of the pipe we've been using so far, and then we'll have it flipped over on the new
pipe with a hole exposed where the bubble was first put into the piece. This will allow us
to put our tools inside of that bubble and we can then manipulate it and turn it into our final
piece. Push in. Get down on it. Get down on it. Get down. You ready? It's pretty. It kind of got
out of the, you know, it was uncontained down there. You can see. All right. Ready?
All right. So now that our piece is transferred to the other pipe,
we've got a little bit of chunky glass on the lip of it where it was connected to the previous pipe.
So I'm going to thin that out with my tweezers and we'll end up cutting this off. This process
quick. That looks great. Thank you. We'll get it with a big one. Big crack. Yes. All right.
So the piece is basically done now, but we're not out of the woods yet. My brother has some
Kevlar gloves on and here in just a moment, we're going to have to break the piece off of the pipe
and he'll catch it in his gloves. We'll transfer it to our annealing oven so that it can cool
overnight. And then we'll finally be able to come back tomorrow and we can see what it looks like.
I think it'd be perfect. You know, all right, I'll take last flash.
This song always reminds me of the men in black song.
No, this is the something. Forget me nots. Make it be nuts.
No, I'm pretty sure it's not. No, it's a, we are the men in black. They have their own,
uh, theme song for it. Ready? All right. So now the piece is disconnected. I can use my
small little map gas torch to get rid of any sort of a sharp spots from the disconnection point.
And then, like I said before, we'll load it into our annealer so it doesn't break or anything.
And in the morning we can come back and take a look at it.
Sweet. All right. And here's the finished piece. I'm really happy with how this turns out. You
know, um, I love the blues. I love the whites, the little striations and stuff. Um, you know,
the flat pieces are always really cool to make too. Um, you know, when you're making these
marini patterns, you never really know how they're going to turn out. So it's always kind
of a test. And this new one, I think it came out really well. I really enjoy how it looks.
And guys, as usual, this piece is available for purchase as of now. So you can check the
description box below and find it on my website or my Etsy page. And as usual, thanks for watching.
I love y'all be safe out there and we'll catch you in the next video. Bye.
