I’m the placard man according to @TheFull9_YT . Spiritus MK5, Shaw Arc V3, F9 Gear ammo hub

Ballistic Lab
1 follower
Nov 27, 2025
I’m the placard man according to @TheFull9_YT . Spiritus MK5, Shaw Arc V3, F9 Gear ammo hub
Alright, hey guys, it's placard season. I don't know if you guys are aware, but we're gonna go over a bunch of placards today
I don't really like showing
Multiple products in the same video because I've been looking for things in the past and run across those and it's kind of frustrating
So you've got a longer video and you got to figure out where what you care about is
but I
Think we'll cover all these in one video. If not, I'll introduce them all here and then I'll make separate videos. So
F9 gear
Has a placard. Oh, yeah, I'm by
first fear
really cool placard a super good guy behind it and
It's got some interesting features that are not
Are not reflected on all the the placards that are being released right now. So we'll talk about that one and then
spiritus mark 5 we'll talk about that one for sure and
the
Shaw concepts
arc v3
This is an interesting approach and we'll go through this one as well. And then well, I was pulling these out. I
Forgot I've been sitting on these for a while the the vxv concepts
Retention kit, so you'll notice it looks a lot like the oh goodness. It's all like real mess here
like the top of the mark 5
Vxv did put these out before
Mark 5 was available
And I I don't really think it's a like a even if it was a blatant copy of the design
It it doesn't hurt spiritus in my opinion
It just gives you the capability to use that particular feature on placards that you already had
Which spiritus didn't seem to have any interest in making this portion available
So, I don't know six in one hand half dozen the other but it's a cool product and we'll talk about that, too
so
We'll get some of these on the table. Maybe one maybe all three and we'll take a look at them
All right, guys, I think what we're gonna do is we'll look at all three
Somebody somewhere will probably hook me up with timestamps and then somebody else will accuse me of not caring
But they'll eventually make it onto the video
so
the reason why I want to talk about all three is because they all bring a little bit something different to the table and
I don't want to make you guys track down three videos to compare these because they all kind of came out at the same time
and they all
essentially fill the same role, but they
interestingly enough take three
Completely different approaches to it in my opinion. All right, so we'll start with the spiritus mark 5 first because I think it is the most
simple to explain
So looking at surface level all three of them are single layer placards
Kind of getting away from the micro flight footprint
Down to
You're only forced to use a single layer and then you can add to it if you want
All right, so bring them back a little bit of modularity through molly
All right. So on the mark 5
Just like the micro fight it is lined on both sides with loop. So if you have
Inserts that work with the gista or the micro fight or anything else that spiritus puts out they'll work on this
You need hook backed
Inserts to work with it. All right
It has a full
molly footprint on the front with six columns of
Molly so you could in theory put on a whole nother three mag setup if you wanted whether that be something like blue force gear
10 speeds that's super popular to do. They add a lot of flexibility
Or you know individual molly pouches frags and what-have-you
Okay on the bottom you have two
Kind of they're not grommets. They're they're laser-cut holes for
Anything you want to lash to the bottom and then on the sides you have a single column of molly and then some more
holes for lashing things
You also have
sewn
one inch loops for adding on
side release buckles if you want to use it as a chest rig or tie it into your cummerbund and
Then on the back it is lined with
hook and it comes with the
sheet of
Loop so that you can cancel that out if you're using it as a chest rig base
The side release buckles on the top are fixed. So you're forced to use a side release buckle compatible
platform
Which isn't a big deal if it's going on a like a LV 119 this, you know spiritus keeps their stuff
At a minimum functional with what they sell in-house there's plenty of other side release buckle platforms out there
So what it comes with out of the box is exactly what you see here plus four
female side release buckles
For mounting on sides to plug into whatever other chest rig accoutrement you want
it does not come with the
bungee setup to
Set up your mag retention nor does it come with an insert? That's not a huge deal
It would be super annoying if some of this stuff came with inserts these days because I'm sure most people have them laying around
So no harm. No foul there kind of would have been nice to just include the retention kit
But I get it if you don't want it, you don't want to pay for that portion either
I didn't actually put any thought into whether or not it came with it when I bought it
So I wasn't surprised that it didn't have it
But it was something to note that it does not come with the the bungee and the tabs
And so that's the spiritus mark 5
I'm also not going to talk about prices in this video
Mostly because if I try to I will misquote something and I'll get more grief for that than I will for not mentioning them
In the first place, they're all fairly competitive
Pricing I think bang for bang for your buck the f9 gear pricing
At least when I bought it was super solid and I'll go into that a little bit more
Okay, but yeah all all told it's spiritus. It's well put together
Some people have been poo-pooing spiritus
Quality control and I know that spiritus said that on this one. They wanted to release it publicly before
Contract stuff to make sure they had it nailed down which it's kind of taking the sig approach to quality control, but that's fine
I don't see any issues on here. I haven't seen any issues with any of my spiritus stuff
I don't think they have any true quality control issues, and I'm sure there's lemons in every batch from every vendor
So maybe that's what's going on. But all said it's a it's a very nice single layer placard that adds a lot of capability
And it's pretty straightforward. There's not a lot of gimmick to this
Aside from potentially your view on the the laser cut holes along the top. I think it's kind of neat
But again, it does not come with the retention
So if that's something that you're gonna want to add make sure you look into that
All right. Next up. We'll talk about the f9 gear
F9 is a new company
Started by the gentleman that runs the full nine
YouTube channel and Instagram page all-around good guy as long as you're willing
To accept that he's from Europe. All right, so
Really good guy though. I talk with him fairly frequently and
I'm excited to see him
make taking the steps to at least design his own gear if not make it right because
First year makes this form so very similar to the capability that you get with the mark 5
However being first sphere you have their kind of in-house fabrics that they use
So the entire inside of this thing is lined with loop
So to work with all the same inserts as the spirit of stuff
It's a it's just a different loop. It's interesting
You have a full molly footprint on the front
Which is pretty pretty useful. You have a single column of molly on the side
Which is you know, just just dandy there
along the bottom you interestingly enough have a
Column if you will of horizontal molly, so if you had
A pouch that you wanted to run along the bottom you could probably do
Like two pistol mags leading into each other for multi tools or something like that
You could put a longer if you had like a suppressor pouch you could put that on there
But what's neat is he also had it cut
so that you can mount a
Tube connector on the bottom and then have a dangler running off of that
If that's something that you're interested in like the Shaw concepts dangler
So that's kind of cool that he thought to include that and you can see those extra notches cut out right there
really cool
What's nice on the sides is it has dual?
Compatibilities so you've got a tube on the side
You can take that off and you can put side release buckles one inch side release buckles on there
You'll see it's got that extra notch there. So that adds a lot of capability, right? You can tie this straight into
cover buns that terminate with tubes or
One inside release buckle the same thing if you're using it as a chest rig base
You can pair it up with either of those. That's really cool that he added that I
Appreciate that touch as well as the bottom tube capability. I have never
used a
tube mounted
dangler
And I'm not totally sold on the need for it
But it makes sense if you're using it as an IFAC or something like that and it's cool that he thought to include that
on the back interestingly enough
First we went with rows of one inch velcro thought that was a little interesting. I don't know why they didn't just put the
Solid chunk, but I'm sure somebody will point out some something having to do with the construction on here that that makes sense
And that's totally fine
What I do appreciate is the top portion on here you're not stuck with
Only side release buckles. You can use g-hooks as well. And then you just tether that down with the one wrap here
And that's also fully adjustable for height
Like you can get really crazy with this thing and give yourself all sorts of height if you're using it as a chest rig base
You just unroll that as as far as you need to
Actually give you quite a bit of velcro here, so I might go back afterwards and research
Why I would I would need quite that much velcro because you can see if I really took all the slack out of here
Say about right there makes sense. We've got some leftover one wrap, but you just cut one wrap off. That's totally fine
It's not going to cause any issues if it's too much for you
What is included in the package is?
Myriad of
side release buckles
So you essentially have the same side release buckle capability out of the package as you do with the first for your option
but it also includes the g-hooks if you're running this on a ferro rig you have g-hooks on top and
Then three of the male tubes, which is no
No small feat there the tubes depending on who's selling them carry kind of a premium
So for those to be included is really nice
And I want to say this thing was right around $50
I know I said I wasn't gonna mention prices, but this one specifically. I think was right around $50 when I bought it
Which is a lot of a lot of hardware is included
at that price and
You are kind of set up for however you want to use it right out of the box
You still don't have
Organic retention on your mags, but nobody has really offered that in the past on these placards anyways, so that's not a huge huge loss
I know I kind of hit on Spirits not including their retention, but that's also because it's actually set up for retention
So this one is not you're just gonna have to pick a insert that covers your retention needs if that's something you want
All right before we get to the Shaw we'll talk about the VXP concepts
Retention kit he sent these to me for a while ago
And I totally lost track of them, and I feel really bad about that
so I want to work those in here if you have an existing placard or
You know something like the f9
You can pick up this and it gives you the same capability for
Selecting whatever level of retention and spacing and what whatever have you that you get with the mark 5
and they are fully reversible, so if you had a
Something like the spiritist where the inside is loop lined
You've got hook on both sides you set that up, or if it's you know one and the other you can flip one around
And you're still good
And then he includes three chunks of
shock cord as
Well as some pull tabs there, so it's a neat setup
I don't remember at all what that costs, but the XP doesn't charge anything crazy for any of his stuff
So if that type of retention
suits your fancy
have at it and
Check that out, right
okay looking at the
Shaw arc v3 this one is kind of the most novel approach of any of these as
Far as how it works
the big selling point on
This one to me was that it can host a 4m 4 mag insert
Which I think is huge there's room on the front of a plate carrier to make it work
Especially once you start going around the radius of the plate. I think 4 mags up front is a good deal
It's 30 rounds better than 3 mags up front, but it also fits
extensive number of sub gun mags or
Three 308 mags if that's something that you want to do which was also appealing of it to me
It incorporates a lot of the same features that the f9 one does so you can see on the side
It will also take tubes or one inch side release buckles
The bottom I don't know I would imagine it'll take a tube. Let's pull one out real quick. I'm sorry
Take a gander at that it should work spacing somewhere on here is gonna look right
I
Think you get it on. I don't know how how great the fit would be, but I'm sure it'll go on there somewhere
if not you have
Molly along the bottom that is perfectly usable as Molly as well as lashing points
All right now what's going on on the sides here?
Well, it's closed with a chunk of shock cord on both sides and the reason why is because
When you open this up
If you go with the 4m 4 mag insert it gives you a little bit of room to stretch out beyond the sides
There a little bit so the footprint itself doesn't have to be quite as large
And then if you're doing the three 308 mags
It'll clean up a little bit and you could still put three m4 mags in here if you wanted to and it wouldn't be
excessively bulky
so if you'll bear with me for just a moment, I will configure three 308 mags in here and
I'll show you one small area of concern that I have on this placard. So just one moment
Alright, if I had the spongebob caption several moments later, I'd throw that in there
But we got our triple 308 insert in here. I know
The scaling is gonna look goofy on here. It looks like m4 mags, but they're the tall boy P mags. So
Inserts in there. You can see the three 308 mags fit pretty well
This particular insert is not
Loop lined on one side, so it's not fully attaching
Which is fine. I kind of like that Shaw has opposing velcro on the inside
So if you don't need anything in here
you can close it all the way up and just use it as a molly platform like if you were switching to
Belt that or something you can close that up. Well, but that said I don't have any compatible inserts right now. So
Don't don't fault Shaw for this not marrying up on the front
But you can see width wise everything checks out and looks pretty good
And that's gonna drive kind of the conversation here if you're running four four
Five five six mags in here, and I apologize. I didn't get the four mag insert. I just figured I'd sort that out later
But I kind of needed it to show this so if you don't have a full length
Insert or full length elastic or whatever kydex, however, you're doing it in the pouch
If you try to reindex a mag which isn't typically super hard on these types of placards
If the if the elastic we'll say is cut off right here
What will happen is as you spread out to four mags
You'll start coming past where the shock cord just wants to lay naturally right now. We're right at that point
so you can see if we had a shorter insert which plenty of people make short inserts as
You reinsert the mag and it comes past the bottom of the insert
this shock cord will kind of fill in that void and
The corner of the magazine will start to catch that shot court and make it harder to completely reindex the magazine
You can kind of see on the bottom here. We can mimic that a little bit if I
Pull some of this mag out of here
It's tricky when it's not mounted to anything you'll see that shot cord now
I know I'm pushing it there
But I got to drive home the point it will kind of lay in its path and as you reindex that mag
the corner of the mag will catch that shot cord and
It's not a durability issue or anything like that. It's just gonna fight reindexing that mag a little bit
and that is
Made much more apparent when you have four mags wide
Within this this placard, right?
This particular insert has a little bit of spacing built into the the footprint
Which is why these are not right up against each other and it's making my point a little bit easier to see
But when you get four mags in there, you'll for sure see it
Now that said I don't think that really
Limits the utility of this. I would just recommend that
When you're shopping for inserts you try to get a full-length insert if not
something with a little bit of a
Side panel to it whether if you could get kydex, that would be great because it would keep your channel open all the time
But if it's gonna be a soft structured insert definitely try to get one that is the full
Five inches tall and sink it all the way to the bottom of the placard
Looking at the back real quick. So I forgot to mention that
It has a similar approach as the f9 gear where you can change your top connection to whatever you want
Whether it be side release buckles or g-hooks or some crazy new thing that somebody eventually makes so that is the
Shaw
concepts arc v3
Placard really cool placard in my opinion. I like the flexibility that you can have three 308 mags or
Four or five five six mags
You just need to understand that that will drive a little bit of consideration on the sides if you have three m4 mags in there
You're not gonna have any issues at all
There you go. So Shaw v3
f9 gear
Ammo hub is what it's called. And then the spiritus
Mark five all very nice single layer placards
I'm super excited that plenty of people are doing awesome work right now and
Putting out solid products for you guys to buy. So thanks for your time
