Conservation of a Romano-British Urn (Episode 6): Reconstruction

Historic Conservation
284 followers
1 Video View·Nov 24, 2025
The sixth episode in a weekly series that tracks the in-depth conservation work on a Romano-British cinerary urn.
Cinerary urns were designed to carry ashes, especially the ashes of cremated bodies.
Follow conservator, Dr Duygu Camurcuoglu as she conserves this beautiful glass object.
As you can see I started reconstructing the glass urn. Prior to this process I evaluated what kind
of adhesive I would be using to reconstruct the urn. So one of my choices was the cellulose nitrate
which the glass urn was previously reconstructed with this adhesive in the 1970s. So I decided that
this particular adhesive, although it's easy to use and apply during the reconstruction process,
may not be so strong to actually withstand the whole kind of traveling and handling process
for the urn. And the second adhesive I kind of thought and evaluated about was epoxy resin.
Because the edges of the glass fragments were really really thick I would have to use a lot
of epoxy resin. So in order not to create a stronger bond than the glass itself, because
it's an archaeological object, it is really old and we do not want to introduce anything stronger
than the glass itself, I decided that this would not be a good option either. The third choice was
the Paralloid B72 which is an acrylic adhesive. Again we often use it in ceramics and glass
objects conservation. And as I talked to colleagues and discussed and evaluated the
strength of the adhesive, Paralloid seems to be creating quite a good bond for the object to be
kind of traveling and being handled within the next five years. So my decision was using a kind
of conservation friendly Paralloid B72. As you can see here I have been working on the object for
the last three weeks now and most of the fragments are started kind of going up. It's a bit like a
jigsaw puzzle really. So basically I either put individual fragments together, like small
fragments together to build up like bigger fragments, or I kind of just add the whole large
fragment onto the kind of base of the glass urn and start building up from it. I use for example
sand trays like this and sometimes to put the glass in if I'm kind of adhering a fragment on,
I put like cling film to actually protect the abrasion from the sand. So obviously it creates
this kind of you know support mechanism. The good practice is that you know we pour a little bit
onto the little kind of glass jar so this prevents the contamination in the bigger jar. So I can just
use the adhesive in the small jar here, then I actually take a little bit of it with a bamboo
skewer and I put it along the edge of the glass fragment and I apply it along the edge of the
glass fragment. And during this process I'm trying not to kind of interfere with the adhesive
much because I don't want to create any kind of air bubbles within the adhesive because if that
happens it may actually create an aesthetically undesirable effect. Once I actually place the
fragments on the larger fragment and find the correct position, I try not to move it and then
because my adhesive is thick enough to hold it together as well, it's around 40 to 50 percent,
I can use cork tape to actually apply along the join to give some strength to the join.
And then I leave it and if necessary sometimes I may need to use you know these clamps to actually
you know hold it in certain areas and to give more strength and support. And yes and I leave it until
adhesive completely sets around maybe two, three hours. I prefer not to touch it before I start
adhering or applying the other fragments you know onto this one. So because we do not want
to introduce any kind of movement onto the fragments and spoil the kind of good join
before the adhesive is set.
