Three Steps for Painting Realistic Trees

European Art Museum
63 followers
In the last video, I sort of challenged you guys on, uh,
wanted to see what you could come up with in terms of the foreground. Well, in,
in my version, my foreground,
I decided to go with some subtle trees,
some tree line back there and I thought they really turned out quite well.
I was very happy with these trees.
I thought that came out really realistic and it gave me an idea to share this
with you.
I thought it was good enough to share it with you anyways and show you kind of
step-by-step how I put these trees together and share with you three
steps on how to improve your own trees in your own work as well.
So let's just jump into it.
So this begins with myself adding the pine trees.
And the way that I get started is by placing a black dot at the highest point of
the trees, the lowest point, as well as for the widest part of the width.
I'm using a small round brush and chromatic black paint.
With some medium added to it. Before I go any further,
I should also tell you the supplies that I'm using.
I'm currently using oils over the top of an already thoroughly dried acrylic
painting. And I'll have all of the materials, the brushes, the paints, et cetera,
listed in the description below, along with links of where to find them.
And the two brushes that I'll be using mainly will be the small round brush and
the dagger striper, which I love so much for fine details.
So if you're wondering about anything that I'm using or the colors I'm mixing,
check below the video. And so for me, this first tree was sort of a trial run.
I started out by filling in the wide area at the base,
but later decided to go with more of like a skeleton approach.
And so I lay the trunk of the tree down and then start to speckle on the
idea of some branches.
I'm trying to go very slowly and carefully so that I don't overdo the
branches and take out too much of that light shining through.
Once I get close to my desired width of the tree,
I switched to an even smaller round brush so that I can get a sharper point.
And I begin to brush outwards with a light amount of pressure to create
the tips of the branches.
I worked my way up and down throughout the tree,
just extending those branches further outwards.
It starts to get a little more sparse as we get towards the edges.
And so I want to work carefully a little more slowly.
And so I'm trying to be more careful and more precise with each little
pine bough that I'm adding.
So let's look at that again with the second tree.
This time I start with that skeleton approach right from the start,
feeling like it's kind of the right way to go,
the easiest path to get to where I want to be.
So I add the trunk in the middle, the spine,
and then I add the bare bones off to the side,
which will kind of begin the idea of some branches,
which I kind of think of as a tree skeleton.
We got the overall proportions, the height, the width,
kind of the structure of our tree.
And all that's left to do is fill it out,
add those pine boughs and little details.
And at this point I kind of thought to myself,
I think I need to restructure this tree on the left a little bit.
Once I kind of got that other one started,
it looked a little too symmetrical to me.
So what I'm doing here is going back and adding some more variety to these
branches. I'm extending some of the branches, making some of them fatter,
some of them longer, and I might add some of the background color back in,
just trying to reshape or reform. You can kind of see that there.
Reshape the tree into something a bit more realistic, like nature intended.
And then of course I just repeat that same process with this tree to the left.
So once those pine trees are finished,
I move to these trees in the background,
which you can see I've already added a few so far,
maybe some large cottonwoods or large Oak trees, something like that.
And I'm basically going to go about this the same way.
So I start with the tree trunk and the large branches,
which kind of gives me the same skeleton look. So the skeleton of the tree,
once I'm happy with the proportions, the height, width, same as the pine tree,
I'm ready to fill it out, add those small details.
So creating these small branches,
I feel like is always a struggle when facing any painting,
when you've got lots of trees, especially trees with no leaves on.
It's really easy to paint them or paint too many of them,
make them appear too thick. You got to have really thin lines.
You want to make it appear like there's thousands of little branches on that
tree because there is.
So one of the ways that I battle that is by thinning the paint down with a lot
of medium. So I'm basically glazing on those small branches.
And I'm going to talk about more in a bit,
but very thin paint when I'm painting those small branches and filling out the
tree. Once I've got it filled out to what I think is adequate,
I go back to the tree trunk and those larger branches and just darken them up a
little bit, just make them stand out from the rest.
And so you can see how those darker tree trunks,
those bold branches start to really stand out against that fine detail.
And that fine detail,
all of a sudden starts to blend together with the background.
It really does look like just tons and tons of little branches there. Okay,
so let's move to the area right beneath the sun and I'm going to switch to a
very bright orange color. So I use more or less black with the other tree.
Now I'm using orange, white,
and maybe just a touch of Brown or burnt Sienna.
And I'm basically going to about this in the same way, the large tree trunks,
large branches first, and then moving to those small branches up above.
And I do the same thing.
I wait to do the small branches until I either run out of paint on my brush.
I have a little bit left or I actually will go back and add more medium to my
paint to make those small branches up top, more transparent,
very, very,
very light amount of pressure on the brush to the canvas when painting those
small branches.
I think we all can easily paint the skeleton portion of the tree is easy to lay
in the trunk and those larger branches, but it always,
at least for myself is most difficult when I get to those small branches.
And so my one big tip or piece of advice for painting those small branches on
trees is try and make it a more of a glaze or transparent layer so that they're
not so harsh.
It's kind of pleasing to the eye and also make sure the paint is thin and most
likely if you're going to try and make it transparent or make it into a glaze,
it's going to be pretty thin anyways, but just keep that in mind.
Not very much paint on the brush and thin transparent layers.
And so now once I'm happy with all those little trees back there,
I kind of go back in with a darker color,
the same way I did with that black tree and I'm darkening those large branches
and darkening up the tree trunk.
And I'll just kind of repeat my way across to the other trees from there.
It's just a matter of moving my way across those smaller trees.
You can see I've laid down sort of a base layer of trees back there,
but now I want to go back and add the detail.
So it's almost like little skeletons back there with no small branch detail.
And so all I'm doing is using the same brush and you can see that paint is
going on very transparently.
It's pretty much just a glaze and I'm adding on some small details to give the
appearance of some distant trees back there.
So let's go ahead and sum this up into a few steps. Number one,
lay down the skeleton, paint the larger branches,
the tree trunk. Don't worry about filling anything in.
Just get the proportions, the height, width,
and overall feel of the tree established. So number one, paint the skeleton.
Number two, using light pressure, fill in the rest of the tree,
add those small branches and fine detail.
And if you're working on a deciduous tree with very small branch detail,
try and thin the paint down, use a glaze instead of an opaque layer.
And with a very light amount of pressure,
brush on or wash on those small branches or the appearances of small branches.
You don't have to get them all,
but try and give that appearance as something light and airy.
And then number three, if you feel you have to, you can make adjustments.
And so just like adding the tree trunks to those trees in the background for the
pine trees, I'm adding some highlights instead.
So making an adjustment here using some red,
orange and white and just brightening up that side of the tree that faces the sun.
And so that's pretty much it.
I finished this painting here with a couple more trees,
some further back towards the sun and I had myself some pretty good looking
trees.
So here is the result of all of that and how these trees ended up looking like
as a whole. I hope you guys enjoyed this. If you remember,
if you have questions, just leave them in the comments below.
I'll be happy to answer. And of course, if you love this video,
hit that like button, subscribe. I've got more videos planned coming up,
but until next time, thanks guys so much again for watching.
We'll see you then.
