How to Paint a Country Road in the Forest | Acrylic Painting

European Art Museum
63 followers
Well hey there friends my name is Chuck Black and in this video I'm going to be completing this
painting tentatively I'm going to be adding some wildlife later but we're going to be completing
the foreground in this fall autumn country road scene. All right so the last video you saw me
leave off with this transition area between the trees the foliage and what's actually going to
be the ground down here so now what we're going to do is basically just pick up from there and
we're going to work on the foreground. Let's go over to the palette I have the same colors that
I had last time I've got raw umber naphthol naphthol crimson is this one cad orange titanium
white cad yellow light and then we have phthalo blue green shade. All right so I'm going to pick
up a large let's see here yeah I'm going to pick up my old trusty large one inch flat brush and I'm
going to get some water on it and I'm going to think about what is underneath all the leaves
when we're talking about the ground. So when you're thinking about painting the ground and
we're going to have lots of leaf litter what's underneath all that well it's going to be
basically just dirt right so we want to paint the color of dirt first and so what I've done
is just taken some red orange I also got some blue and some raw umber and what I'm going to do
is just cover that now it's about the same color that I have up here so to correct for that
what I should probably do we can get to that in a second since I have this color I'm gonna go ahead
and fill this side in as well but I want to get this color down so that I can paint the leaves
over the top because it's really hard to paint this color around the leaves I would rather have
the ground established the dirt established and then just spot the leaves over the top if that
makes sense just gonna make it a lot easier on us so I'm gonna go ahead and get this color
on here now what I talked about down there below the hill line I'm just gonna take a lot of blue
and I'm also gonna take some red and some raw umber but it's more blue you see that goes on
there it's up it's a glaze pretty much and that's gonna glaze really dark so I'm just gonna put it
on I still want to leave some of this area a little bit lighter okay now and actually I could
probably use some of that color over here as well even on a couple of these tree trunks just to make
some of these air we want some areas to be dark so let's just go ahead and shade in some of these
areas now the reason I'm not coloring it all dark and it's kind of patchy like this is because we
want to give the effect of some shadows so we want some light peeking through these trees up here
so some area is going to be dark some areas are going to be lighter okay but now let's go back
to this other side here and let's just pick up some more orange raw umber a little bit of that
blue but not as much a lot brighter we'll just sort of blend these two together so you can see now
we've got a transition you don't need to go well we'll go up about to right there just make sure
the canvas is covered okay so now we've got a transition here and you can clearly see that
this is a little bit lighter that's a lot darker and uh I think we'll leave some of that light area
over here okay now down low I might want some more saturated tones so I'm going to pick up some red
I'm going to mix that with this darker color here so this is going to be a deep red and I'm just
going to blotch on some of those deep reds just down low though we don't want to go too high
so lots of saturation down low now I'm going to grab some blue mix it in I'm going to do the same
kind of go around the red that I just put on so some deep red blue tones make them a little bit
random okay so we got some blue and red tones down low and it kind of fades up so really really dark
looking huh but that subtlety between those tones I'm going to kind of add to it look nice when it's
done okay now let's move on to the road itself and I'm just washing off this brush okay now let's
mix like a gray so we'll take some white and we'll take some raw umber we'll add just a tiny amount
of blue there so I'm going to start to shade the the road so this is just a darker
slightly darker gray it's got a little bit of color to it now there's no right or wrong way
to do this because the shadows can appear however you'd like them to just yeah it doesn't matter
you know what it's probably easiest go ahead yeah sometimes you got to do things on the fly
so I'm going to go ahead and scrub in most of the area with this dull darker color so now you can
see we've got a distinction between the lights up here and uh the actual shaded part of this
painting so now I'm going to go ahead and just add a slightly darker tone here I'm going to take some
red and blue and I'm going to add some more of the raw umber there we go so now we have even
darker shadows okay now I'm really going to define where the the most shaded areas are
going to exist where the darkest portion of the shadows will exist and where those highlights
might be so it's very rough at this point I just want the idea established because we will have
some texture added to this so this is just kind of a foundation okay perfect now we're gonna go
back to some white and also I still have some wet umber right here we're gonna take some orange
and some red a little more red brighten it up with some white there we go a little color to
it a little bit brighter I'm gonna start going over those areas that I left a little bit brighter
all right now we're going to take some white and some orange look at that some nice highlights
starting to pop now you can see and sort of envision in your mind beautiful where the
light's peeking through it's landing on the path down here okay now I'm going to just continue
with that color but I'm going to add more red and orange just like that now where those highlights
come across here just gonna add a little bit right there a little bit around there but I'm
not going overboard with this part because I want to detail the highlights around these areas more
so with the leaves I'm just creating a little bit of a glow effect you'll see what I mean when I add
more detail but I want some of this color to be nice and soft but I don't want a lot of it to be
so I'm very careful right now with how much I'm putting down okay let's just leave it like that
wash my brush now I'm going to let everything dry here and then I'll come back in a few minutes
and we'll work on detailing before I get started once I stood back and really looked at this
I think I want some of these lighter pinks and reds to just fade down into the dark a little
bit more just too much of a hard edge maybe especially right here so I'm just going to go
ahead and fan out that area it's red and orange some white let's just see if that will work
I'm just using a round brush this time okay that is much better all right
now for this next step what I'm going to do is I'm going to go back to
what I was using in the last video we've got just a small filbert brush just so you know this is a
shader filbert number two it's just a very small filbert brush now you wouldn't have to use
something like this you could use just a liner brush it would work just as well just something
with a small tip and what I'm going to do and I think the first thing I want to do is I want to
start with the leaves that are in the shadows because if I start with the the bright leaves
I could go overboard much easier and the leaves in the shadows could also exist where the light's
so we'll start with those it's just going to be a lot easier to figure things out once we get
some of these shaded leaves in so I'm just mixing some red orange and some well I'm kind of mixing
everything together I'm just getting a darker tone with some red then I'm also adding some blue to
that okay now all I'm going to do let's start let's start right here in this bank so this is a
pretty dark color you probably see a little bit easier right through here now it's not doing a
whole lot but having these dark textures are just as important as the ones we can see so these dark
subtle textures are just as important as having the obvious bright ones because we want something
to look at underneath and of course this color is kind of similar to what we've got back way back
here so I could even tap some of that on just kind of rolling the brush tapping the brush any way I
can to create just some small minute textures doesn't have to be a lot this is going to give
us a good base though because these shaded areas need to have something so this is kind of the
first color going on so I'm going to do a couple areas of example we'll start with just this lower
area now at any point if you think you painted something too bright maybe you this whole layer
ends up being too rich too bright too vibrant you can always dull it back darken it by glazing colors
over the top okay so that's kind of just a good base now I'll wash my brush and I'll kind of move
on to the next layer now remember we've got lots of different colors of leaves shades of leaves I
should say because a lot of them are going to be orange and red not all of them but I'm going to
mix just varying different colors of reds and orange a little bit of yellows too so now this
next color you can see it's going to be a little bit brighter than this one here I'm going to go
ahead and just add some more red to that and I'm going to go over basically kind of the same area
and I'm going to kind of go in between I'm going to go all different directions I want some leaves
to be round some leaves to have some points some sharp edges now again I said this in the first
video but if you're really looking to pull out realism in this painting you could paint
each individual leaf you could paint all the way down to pointy edges the round bottoms
twig detail stem detail if you're really looking to pull out that realism you could work a long
time on stuff like this but for this example for this painting I'm just not overly concerned
I don't want the focus to be on the landscape itself I think I'm going to have a subject in
this painting perhaps a deer so you could say I'm somewhat loose with how I'm painting these
these leaves I'm just letting the brush do the work okay now our next layer let's say we've got
a little bit more orange so let's just take some orange and white with some raw umber I'm just
adding raw umber to it darken it down so it's kind of the same value but different color and
I'm going to go in between all the leaves over again so now we're adding a third color leaf
and we're going to scatter those around as well so really quite easy you're going to get a great
result by doing this now for this really dark portion as it fades off down into here what we
could do is grab some blue and some burnt some raw umber same burnt we'll take some red
probably a touch of white in that add some more white we'll just pick up some of that color
add it to it there we go so this is a dark gray I'm just spotting on a little bit of texture
not a lot I'm going to blend it as it goes into the shadows
and then pick up some more orange red and mix some of that some darker red orange a little
bit brighter though than what I just laid down and then we'll add just a few but I'm going to
make them more of a thin shaped leaf so it looks like it is going downhill we want them to be a
so we're just changing the angle of the brush that's going to give it a different result
it's going to give the illusion that this hill really is going down of course where it flattens
out we're going to be able to see the leaves more so they're more round and flat pretty easy though
huh so now we've got kind of an edge that goes off right here I'm gonna go ahead and wash my brush
and I think what I'm going to do now is I'm going to take some deep red we're just going to add some
red to some of this mixture here I want some of those red leaves to be on the ground as well
so this is a nice deep red now yeah there we go and we'll just add this layer of red leaves
I keep trying to go in between the leaves that I made already so that we add as much
texture to the canvases as possible leaving just a little bit of that dark in between
that ends up being kind of lost in the mixture as well I could put some of those red leaves
going down that edge just a few okay looking pretty good got some nice looking leaves here
now for the next thing let's say we want to move into the area of highlight so what we could do
there let's think about what colors we're going to have basically I could probably use the same
pile of colors here but let's just add some red orange and some white to the mixture
a little more orange okay so that's probably the brightest color that we've mixed yet
let's just start with that a couple up here
and remember as we get further away we want the leaves to appear smaller
the texture is going to start to just all kind of blend together as you get further up into here
okay so now we've got some brighter leaves go back to some of this more of a dirty color
we'll add some of those let's add some white to that though now you could take this brighter color
and add just a couple in the area of shadow as well just a few just makes things pop out a little
more okay now you can see that things are starting to take shape we're starting to be able to
envision in our mind what is illuminated by the light source and what's not we're just going to
have to keep working on blending this out just a little bit more of course there's kind of a hard
edge just above that so I would just go back try to make something in between and just kind of
fade it out the more you do it the more you'll notice oh I need to go back add some brighter
brights or some darker darks but you just got to play it by ear now you could always add just a
few I wouldn't go overboard on this but you could take some orange and some yellow and some white
let's add just a little bit of an off color into that as well we could add a couple even brighter
highlights this is just a good example of what I was just talking about adding brighter brights
back and forth back and forth just gonna have to just feel it up see what works best what looks
best okay now let's move on to the road before I forget now the road I think what I want to do
is move to more of a liner brush let's just take out a liner brush and pick up some of these same
tones these are kind of the tones that were in the road add some brighter white to that
and go even brighter areas of the highlights I'm just going to take the liner brush just like this
I'm going to add some texture so I'm just sort of just sporadically moving the liner brush back and
forth back and forth I'm adding on different shapes of texture leaving some of the values
that I've already got in place visible I don't want to cover everything up underneath I just
want to add some random texture to this whole area so I'll use these brighter colors add that
to the areas of highlights I could even take some brighter white I want to be pure white
a little bit of an off white look at that just tapping it on really easy and in a matter of no
time you can texture a whole area and then when we move into the shadows take some of this blue
take some blue and white so we got kind of a blue gray so I just took some of the mixture we had
of this dark tone and I added some more blue and white to that you can see this is a little bit
brighter than the shadows so I can go right over the top and add some texture to that
this is going to give the road a very nice texture and I could add a few
to the highlights as well just sort of blend it in just like that remember the
textures should be a little bit larger as you get way down close to the foreground here the
bottom of the painting and look at a little bit smaller as we move up so that's all I'm going to
do is just texturize this whole area of the foreground and I'll just keep on going just like
this and I'll slow it down and I feel like another step is coming on
well as always thank you so much for watching I'm thrilled with how this one came together all I did
if you had any questions at all was just continue to pixelate the foreground I adjusted the road
just slightly a little bit I thought that it could have been widened up back through this
area so I did a little bit of that just added a few minor things but for the most part the process
was exactly the same before I sped it up but if you had questions of course please be sure to
leave them in the comments below and I'm gonna bring you back into this painting one more time
a third time when I do probably a whitetail deer I've got deer on my mind lately so probably do
that and then also finish the painting perhaps with some oil paint and I'll include that all
in the final video and of course if you'd like to support my channel please check out my free
print giveaway as well as my ebay auctions and website all of those links are in the description
below if you didn't already I auction off all the paintings I do here in the videos
through my ebay until next time we'll see you then
