The "BLUES" Truck has a hidden BAD ENGINE and the customer didn't know!

Engine in Focus
4 followers
In this video we are working on what I call the "Blues" Truck for a couple reasons, other than it is blue. Nice truck overall, but has some serious problems. Trying out the new Milwaukee 1/2" impact as well and seeing Interstate McBee parts for the first time. Thanks for watching.
#machine #engine
In this video we're working on a truck that I'm going to call the Blues.
Am I going to that? Well, it was supposed to be just a valve adjustment and it was run a little off.
So I went up there, did check the valve adjustment, got on the second
valve, well number five cylinder, and I couldn't adjust it. There is no valve lash, which means
they are so receded we have to pull the head. Pulled the head and sure enough, very bad valve
recession. Of course, also found problems with the head gasket. We got some polished liners.
So this went from not good to bad. Also have our new Milwaukee half-inch impact. We're going to
be trying that out, see if we can remove any head bolts with it. And never tried that before with
the half-inch impact. Interesting thing we also have for the first time, I'm going to be trying
to use some Interstate McBee parts that the customer got. Never used them before but have
heard of them. Hope you guys enjoy the video. Hey guys, Josh with DepthDive Channel and today
what we've got behind me is a beautiful blue Peterbilt with a 5E canine and it has some bad
valve recession. How do I know? Well, I came out of here about a week ago to do an overhead and
let's just say some of them couldn't be adjusted. You'd back off a couple of intake valves all the
way, still no gap. So fortunately that means the head has to come off, which he wasn't really
planning for. But what I'm going to be doing is I got the new Milwaukee half-inch impact,
the shorter one that hits super hard. I'm going to see if it'll take the head bolts off
and just video in general, turn it down and hopefully it doesn't need a rebuild. If it does
though, we'll be finding out in this video. So here's the new Milwaukee and it's the half-inch
one and it's supposed to hit about 100 foot pounds harder than the old one, which I actually like my
one quite a bit. The half-inch one, not the one-inch one I had kept in weak sauce, but as you can see,
it's much shorter. It's better balanced. Probably my biggest problem with the Milwaukee's was just
the weight before. So here's number five intake. You can see I adjusted six. I got the five and I
had it all the way backed off and yeah, was not, there was no gap. I could not back it off anymore.
Same with number three. Couldn't back it off anymore, which is a problem obviously because
the valves would close, but your rocker adjustment is just out. So looking at this one, it's the
right side or exhaust side one intake valve that was the problem here. It was about a tenth of an
inch difference, which is pretty significant. And then on number three, it was actually the left
side or intake one, intake side one that was higher. It's kind of hard to tell from here because
the intakes generally sit higher than the exhaust ones, but yeah, they were pretty bad recess
because we're not too happy about that. So first time trying this puppy out, let's see what happens.
Took those cam bolts out pretty easy, but of course they're only about 200 foot pounds.
And, uh, but it is nicer having the thinner body because yeah, it's much harder to get the larger
one in there. And that's my main problem with the older one. Wasn't that it didn't hit hard. I mean,
I could do main bearings with it most of the time. It's just, it was too long and very heavy. Just
Now I got a deep 12.5 inch drive socket. It's a Sonex one. I was going to get a Williams one,
but it wouldn't have been here in time, unfortunately, to try this out. I've had
really good luck with the Williams ones or not Williams, but also Sonex. Most of my
sockets are Sonex. Let's give it a try. No go, but this is only the five amp hour battery. Of course
there's a, I have a 12 and an eight. I should have tried them, but I wanted to try with just the five.
So not, not blaming the gun yet, but let's try the other gun.
So yeah, the first three I checked there, it didn't work. What I'm going to do is try my
old half inch. Cause I have both the guns here to see, you know, maybe there's something wrong
with this new gun. Could be the battery obviously also. Now there is a new battery that Milwaukee
has called the forge battery and they are quite expensive. The battery is almost as much as the
gun. It was only, the gun was about $230 if I remember right, which is not bad at all.
And let's try it with this one. This is the old one. Still nothing. So as I usually end up doing,
breaking them by hand, breaking them loose by hand, I should say, three quarter inch drive
breaker bar with the special socket. And yeah, just breaking them by loose. These were pretty
tight, but they weren't rusted in place or carbon packed tight, which is a good sign when they're
super bad and rusted or carbon packed, it can almost, I mean, you're bending that bar to get
it to move. And I think it's a 48 inch bar or something like that. Quite a bit of leverage on
there, but yeah, I'm going to break the outer ones loose by hand here. And then we're going to try,
cause sometimes you've just got the outer ones or something. I'm going to keep trying with the
impact because maybe you just, these were the tightest ones for some reason. I'm not sure.
So what we're going to do is just break them loose. Like I said, and I've actually, even when
I have three quarter impact with air, I would usually break them loose by hand because I found
even with the three quarter, sometimes they wouldn't loosen. And I really hate going back
and forth with tools. I'd rather just pop them all loose with one tool, but let's try the impact
again, not giving up on her. Like I said, it's also with a small battery, so
that took them off. So yeah, the inner around cylinder two were concerned.
Might be, see me kind of jumping all over the place. I was doing it actually in reverse
head torquing order, which I usually do, but it's, it's outer and then inward. It's kind of weird.
Anyway, I would say the impact took about 80, maybe 85% of the head bolts out. It seemed like those
outer like around cylinder six and cylinder one were the tightest for some reason. I might try
with the eight amp hour battery next. I still have to do the main bearings. Obviously we're
just getting the head off here at this point, but I'm going to try it with the main bearings
because my other gun would always not always most of the time to the main. So hopefully this one
also did. You guys made it this far. How about a little destruction of the week?
Our first destruction of the week comes from Caesar and Caesar said he was having a boost
problem and he couldn't find it for a little while. And then he pulled the turbo off and
something looks a little. Yeah. I cracking between the flange here is normal. I have
never seen one completely disintegrated like that though. That is crazy. He obviously replaced it
and that helped us boost out pretty bad. So this engine here is a six NZ actually did the overhead
on it last year and helped fix his Jake's, but he said it ran great for a while. And then all
of a sudden the Jake's were a little bit weaker for some reason. So pull the valve covers off and
look at that number two, the little elephant foot or whatever you want to call it. The cup
was missing. Look, see on the plunger, you can still see the little retaining ring there. So
that is probably part of his problem. I'm fishing for them. They were right there.
And that freeze plug area right there. Both of them just broke right in half. It's almost like
they were cut in half. That's pretty crazy. Not sure if you can get just that piece. It would be
nice if you could. I guess we'll have to find out, but it looks like that took care of that problem.
So successfully able to remove, or well, loosen all the head bolts. You can see they're still
in there. Taking a look at them just for carbon packing and rust. Pretty clean. They're fairly dry.
Usually you'll have more molybdenum paste or oil around the threads there, but I'm not sure when
these head bolts had ever been out before. So, but pretty clean. You could see them with being
that dry how they could be a little tight. Like especially that one, which actually I believe
that one I was able to remove with the impact. No, no, not that one. The one that connects with more
towards cylinder five there. But yeah, most of them all, pretty much all the center ones, came out
with the impact. Loosen the head here with the beautiful crane. Rigging's a little suspect.
Actually got a better way to rig it, which I'll show you next video, hopefully. So here's our
valve recession. Now look at the lip there, right in that valve. You should not be able to see that.
That means that valve has moved up considerably compared to that one where you cannot see the
ridge. So yeah, that is basically, even though it's still sealing now, unfortunately your rockers don't
have enough movement in the adjuster to make up for that. And if you had kept running it like this,
big problems would happen. I mean eventually that valve will just keep moving up.
And since you're opening and closing it in different phase than the other valves, it can
cause a drop valve, a bent valve, something major that you generally, you know, you don't want it
for your engine. So looking at the health of the engine here, we have the head gasket. And you
always want to take a look at fire rings, especially between the cylinders. So there's some discoloration
there. Not completely blown out, but especially around cylinder two and cylinder five. Not looking
too good. Like I said, not blown yet, but there's some there's some marks there. Didn't video it,
but we did liner protrusion and two and five were sunk. They had some sections that were about two
thousandths low. Cylinder condition, not great. Basically polished. There's almost no crosshatch
left, which unfortunately the customer opted, which I think correctly, to pull the cylinders out and
rebuild the engine. So as you can see guys, we've made some progress here. I got the oil pan off,
mopped the floor, which I actually got a mop. Well this customer had their own mop, but
I bought a mop and a mop bucket and a wringer because it's been
annoying not having my own. Kind of always not keeping the floor as clean as I would
like, so we fixed that. So what's going on here? Well, of course valve recession was our main
problem. That's going to get fixed. We got a new cat head, but pull the liner. Well, liner protrusion
on two and five was off. It was sunk. Five was starting to lose the head gasket. So pull the
liners out. Number six is already cut. Had a 32,000 shim. It's cut to 32. Cut this one to 30.
These ones looked fine as far as liner protrusion goes on the inspection area.
One also, two looked, if I was just looking at it, I'd say iffy. But it measured low, so we cut it.
So six had already been cut. We did two and five. One, three, and four already good to go.
Customer went with an aftermarket kit, although it's kind of a hodgepodge because we have a cat
head. But Interstate McV. I believe they're out of Ohio. Yeah, Ohio. I've heard of them, but I've
never used any other stuff before. So this is the liner kits that we got. Is not assembled,
as you can see. It doesn't come with a rod. The customer did buy rods separately though.
From my initial impressions, they seem decent. We'll see. Some other stuff, like this one says,
made in the USA. They're made in the United States. Wrist pin, made in Taiwan. I'm not sure
where the liner was made. Same with the piston and the skirt. It's a two-piece aluminum skirt.
Appears to be a forged piston. Could be wrong. Pretty good instructions here. Better than cat
gives you for initial run-in. Piston installation guide, ring guide. Also for the liner protrusion
being inspected. Tells you what to use, where they go. Instructions are pretty nice so far.
So I'm going to do liner protrusion first, then we're going to try our new Milwaukee on the
Alright guys, so we got our kits out. Getting ready to do our liner protrusion. Got our six
liners. First big problem. Liner seals, right? Seem to be good quality. So we got one, two,
three, four, five. I re-looked through all six boxes. I even looked in the piston ring kits.
This one, which you know they're not numbered, but this is going to be number six.
There was no liner seals in the kit. That creates a problem. You don't know this folks,
this is actually Saturday morning and I don't know if you could run cat o-rings
with an aftermarket kit. Maybe you could, maybe you couldn't. This isn't something I'd gamble with
though, so I wouldn't say let's put cat o-rings on it. Which I think I actually have a whole set on,
I believe. Probably want to use interstate mcb, which up to this point, which just looking at
initially, will seem fine. But where's the one on the ladder kits? So that really makes,
this sucks now because I can put these in dry, do a liner protrusion, but I can't do final install.
Which if I can't do one of the packs, I can only do five. That's really going to slow down
everything. I guess I could do the main bearings and five of the liners, but kind of dumb.
So I'm getting at the end of the video here folks, kind of a post script. Customer reached
out the interstate mcb on Monday, they had this liner seal there the next day overnighted.
You know, it's, everyone can make mistakes, but they fixed it right away. So you know,
simple mistake. We'll be looking at the rest of the parts though in the next video. Thanks
for watching.
