Can I Return This Unfixable Classic Cruiser To Duty?

Two-Wheeler Technology
5 followers
2 Video Views·Nov 12, 2025
Can I Return This Unfixable Classic Cruiser To Duty?
I put it on APB looking for unfixable bikes and you guys didn't disappoint.
I got an email about this cult classic motorcycle and it was super close to home so I couldn't
help but hopping in the truck and running over to check it out.
Dan, come here, look at this.
Look at this piece of history.
This is a 1981 Kawasaki KZ1000 and if you're not familiar, this is the OG Superbike right
here.
And it was also made popular on the TV show Chips, written by Ponchorelli and his friend,
the other guy, Eric Ponchorelli.
It doesn't matter, it was on that show.
So the story of this bike is it was at a couple different shops and though it was running,
it wasn't running quite right.
After it came back from the last shop, it kind of got parked here in the garage and
hasn't been ridden in about 10 years.
Today we're going to change that.
We're going to dig it out of the garage, load it up, take it back to the shop and see what
we can do with it.
Let's do it.
There you are.
I didn't get any lighter.
Got the spray.
Yes.
Now that we have this bike out of the barn and cleaned up a little bit, let's go over
it and take a look to see exactly what it is we have.
Maybe I misspoke in the beginning of this video saying that this was a 1981 Kawasaki
KZ1000.
It's actually a 1982.
It was made in October of 81, which would make it an 82 according to the VIN.
Tires are going to be an issue.
We have some leaky fork seals.
The front master cylinder is shot.
Let's look in the tank.
Oh, wow.
The tank is actually, surprisingly, that tank is nice and clean.
Now when we picked this bike up, he said it ran when it was parked, but it didn't really
run right.
Man, that was about 10, 15 years ago.
I don't know why it wasn't quite running right.
He said it was at a couple other shops and it was just never quite right.
So they parked it, kind of forgot about it for 10 or 15 years, and now here we are.
So I'm going to take off the tank and take off the seat.
We're going to kind of start with the very basics.
First thing we're going to do is compression test, and we're going to see what the readings
are between the four cylinders.
Whoa.
Okay, that was a little easier than I expected.
Not much holding that tank on either.
Looks like we have a vacuum line and a fuel line.
There it is.
Now I guess the tank's free.
Yep.
Oh, nope.
So this has a sending unit in it.
So we need to pop these wires off.
There.
Now.
Oh, jeez.
Okay, there's something else.
Okay, now is there anything else?
No.
Now let's see, what do we have here?
So we know fuel line's bad.
All the carb things turn, butterflies turn, enricher circuit looks like it's working.
Yeah, let's start with pulling the plugs.
So while I'm taking this apart, I'm just looking for little things that could be causing any
sort of issues.
So here, for instance, I kept these in order.
Looks like our right cylinder's running a little leaner than our left two cylinders.
So I don't know, maybe that's a clue.
Let's see if we can get the engine to turn over.
Make sure that's good and free.
And then it's going to be time to do a compression test on these cylinders.
Ground.
Oh.
Okay, we're going to not ground that right now.
Turn signal.
Other turn signal.
Is the headlamp blown?
That was four ways.
Oh, those were four ways.
Okay.
I saw an on switch.
I thought maybe that was lights.
Okay.
Nothing.
So, let's pull that battery.
Did you stop shocking yourself?
Gotta stop doing that.
Okay, we got lights.
All right.
Good news is, the motor turns over.
Good.
First step.
Time for a compression test.
Okay.
Key on.
Throttle all the way open.
And we're going to crank the engine over until it stops building pressure.
150.
145.
Just over 150.
We have three cylinders at 150 pounds of compression.
The number two cylinder is at 145.
All right there.
Pretty good.
Now, one thing I did notice here, see how there's RTV, our gasket maker, coming out
underneath this valve cover gasket?
I know these valve cover gaskets are no longer available through Honda, so you have to get
them either aftermarket or find a new old stock on eBay or something.
So, it looks like somebody was in here adjusting valves is what they were doing.
Just something for me to keep in the back of my mind while I'm trying to figure out
what's going on here.
So, at some point, one of the mechanics thought that it was a valve issue.
Yeah.
At some point, a mechanic went in there and adjusted valves or checked valve clearance.
Whatever he did didn't help.
Well, I guess if it helped, it wouldn't be an unfixable bike.
That's kind of what I'm getting at.
We're going to want to figure out how to move this air box as well.
Carburetors.
I'm sure they're gummed up from sitting for so long.
Yeah.
I think pulling these carburetors off is going to be the next step.
I guess the other thing we could do too is check spark.
Spark.
Okay.
We have spark on all four holes.
That's good.
I think I have to pull this battery box.
And then this air box will move back probably just enough to get to the carburetors.
All right.
Now, let's pull this stuff off.
Okay.
And there's the air cleaner.
Foam's gone.
That's not good.
We'll see if we have enough room to take these carbs out.
Pulling carbs is hard work.
Just don't want to mangle up these intake boots.
These carbs sound pretty carby.
They sound super carby.
How do they look?
Looking good.
They don't look bad.
They're fairly clean on the outside.
That's all good stuff, man.
If those carbs were cleaned by one of those shops beforehand, they didn't ride it much,
but it sat for 10 or 15 years.
Yeah.
So it's going to need done again.
Lame.
Okay.
Now we have a set of carbs.
Nice.
However, I do want to figure out this air box situation because I don't want to have
to fight them carbs that hard to put them back on.
Let's look at the parts booked in.
We got to find a couple of things.
So it looks like these carburetors were cleaned probably again before it got parked.
But one thing you will notice here is this left side.
It looks like it's tarnished more than the others.
So possibly there was a little leaky fuel here because remember that's the kickstand side.
So I'm guessing this carburetor here out of the four of them is going to be the worst,
but we'll see.
Oh, look, that doesn't look too bad at all.
Got a little bit of buildup there on the bottom.
It's not horrible.
The carbs still clean.
Carbs are still pretty clean.
I'm liking this.
And this is the one I was a little worried about.
There it goes.
Gasket's holding this up.
It's not horrible.
So I do have some new parts coming.
I have new float bowl gaskets.
I have new needles and seats.
I have some new O-rings coming and I also have new air cutoff valves.
So we're going to get this rack of carburetors all cleaned up.
We're going to get the new parts installed and I'm going to figure out how to remove
that battery box and get the air cleaner out of the way better so that these will go back
in easier and reduce the risk of us tearing those intake boots because that wouldn't be
good at all.
Don't want to do that.
Well, out of all the problems this bike might have, carburetors ain't one.
Carburetors don't seem to be one.
I got 99 problems and the carburetor ain't one.
Put that on Carb-Tunes.
Okay, so looking things over a little bit, I noticed a few other things.
Our coils are wrapped in electrical tape.
So I wonder if there's a lost spark type issue somewhere where the coils were shorting out
and that's in conjunction with having this rubber hose around the spark plug wires.
Kind of a shade tree type fix.
And I did notice with this RTV gasket sealer, there was quite a bit of oil leaking onto
the heads here coming from between the valve cover and the head.
So I think what we're going to do is I found a new old stock gasket online.
I'm going to get that ordered and get that headed here and we're going to pull the valve
cover, check valves and replace this gasket, stop that oil leak.
Also with that order, I'm going to be ordering replacement springs here for these air boots.
And the only other thing I want to check, I looked in the parts book and I didn't see
that there was O-rings between the intake boot here and the head, but I just want to
make sure that there's not O-ring in between there.
What happens is over time, that O-ring gets smashed, it gets hard, it's not as pliable
anymore, and that starts creating an air leak, which can cause a poor running condition.
So that's another thing I'm going to check.
Let me grab my Allen wrenches and we're going to check that right now.
We'll do this before we forget.
There's nothing worse than hitting send on a parts order just to realize 18 seconds later
that you forgot something.
Oh, well that was, that was like loose.
This bottom bolt here was loose.
Again, that could be creating, for sure, I mean, that's creating an air leak.
With that bolt being loose, look, you can see the light through here.
See that crack?
Oh yeah.
So again, just something to keep in mind here while I'm going through this.
We're going to check all those others, make sure that they're good and tight.
We're ordering a lot of parts, Craig.
Do we get to the point where we order enough stuff, we get like a new drill?
We got free shipping.
Might be able to get away with a little gasket maker on there just to help seal up any potential
leaks.
Okay, while we have the wrench out, we're going to make sure they're all tight.
Oh, that one's loose too.
Why are these loose?
I don't know.
That is a great question, Dan.
You asked the best.
When I first met you, I said, you know, I think this guy's going to ask a lot of good
questions.
I asked the best questions.
And I was right.
You asked the best questions.
Sensei, I asked the best.
We're going to have to start making some room here so we can get the valve cover off.
That's going to be a step.
And I'm also going to lightly screw in the spark plugs so that nothing falls down into
the cylinders.
It's a couple of days later and some parts started rolling in for this bike.
We have enough to get started, but not enough to finish stuff.
You know how that works.
So here's the deal with the carburetors.
I pulled the air cut valve off this end carburetor and the diaphragm, it was actually kind of
stuck in there.
It doesn't move freely because there's dirt.
See how dirty that is?
That should be nice and clean.
Same in here.
The problem with replacing the air cuts is you can get to this one fine, but you can't
get to this one or this one.
This one here is kind of tricky.
So you have to pull the carbs off the rack.
That's doable.
But then the next thing you run into is these plastic fuel tubes.
They're all molded as one piece and it's a barb.
It's not a replaceable O-ring on these.
I don't think they're leaking right now, but as soon as I pull this all off, there's a
really good chance that they're going to start leaking.
So I found some aftermarket ones that are metal and have an O-ring on.
They just didn't come in yet.
So I'm going to set the carburetors aside for now because I want everything here so
I can just take them apart and put them right back together.
Because when you're pulling carbs off of the rack, you have to really watch what you're
doing.
There's a lot of linkages.
There's a lot of springs.
There's little detent balls in here.
It's kind of a thing.
So I want all the carburetor parts here so I can just do it all at one shot and I know
everything's going to be right.
So I'm going to set the carburetors aside for now until those fuel tubes come.
Then we're going to attack them and hopefully we're all good.
So that leads us to, what do we have here?
Fork seals and one of the caliper kits came.
So I'm going to do things a little out of order.
Generally, I'd want to get the bike running, hear the bike run, make sure all that's good
before I go spending time and money doing the brakes, the forks, everything else that
needs done.
But I'm confident once we get these things cleaned and everything going on with the engine,
it's going to run fine.
I'm going to get some of this stuff done while I wait for the other parts to show up.
It's just where we're at.
Right, Dan?
Got to get something done.
You guys want a video.
Blame it on the audience.
Okay, so I'm going to start at the front end here and I'm going to work my way through.
So now normally when I do fork seals, what I do is I pull the front tire and fender and
then I drop the fork tube out of the triple clamps and take everything over the bench,
pull it apart and do that.
I was talking to an old timer friend of mine last night and he's like, you know those you
can just do right on the bike.
Hmm, tell me more.
So I'm going to remove the lowers while leaving the uppers on the bike.
Plan is, I'm going to pull the brake calipers, pull the tire, pull the fenders, dust cap
comes up, snap ring comes off and I should be able to drop the lower right off the bottom
after I take the bolt out.
And it comes up in here, replace my seal, do everything, put it back on, put the bolt
back in.
And then what I'm going to do is loosen this top clamp bolt a little bit.
These are air assist forks.
So I'm going to loosen this pinch bolt here a little bit, pull this cap off, put fresh
oil in it and we should be set to go.
If this all works, it's going to probably save me a bunch of time, which is cool.
Let's get to work.
There it goes.
I was going to try to relieve the tension before the bolt came all the way up, but the
bolt came all the way out before.
Pull them off.
That didn't move.
Easy.
Okay, so then that's going to be ready to go back on the bike.
I need to get this stuff cleaned up though.
A lot of seepage coming out of this bike.
Whee, I tell ya.
Sounds like a pharmaceutical side effect.
Okay, now these here are marked, see that?
There's an arrow.
So I need to look to see which way they want the arrow facing.
I'm guessing forward and I know which was off of which fork.
So that will all go back together the way it was supposed to.
Just as Mr. Honda intended.
That's right.
Honda trivia question.
What was the saying that put Honda in the map on their first big US campaign?
What was their slogan?
Why are we talking about Hondas?
We're working on a Kawasaki.
We're not Ford.
You find the nicest people on a Honda.
Oh, I forgot we were working on a Kawasaki.
Okay, so here's where we're at.
New tires on the front wheel.
That's all mounted and balanced.
I need to go through and clean the brake discs yet.
I have my fork seals in.
I need to put fork oil in the top, but I also need to rebuild the front brake master cylinder
and the front brake calipers.
So I'm going to work on that next.
I'm going to start by taking the line off the top, getting, blowing through that, getting
all the fluid out and then taking the master cylinder off, getting that all cleaned up
and seeing where that goes.
Okay.
So what in the tarnation is going on here?
I think this is the horn.
They moved the horn button and put it here.
Okay.
So I'm going to start by cracking the banjo bolt loose.
Why do they call it the banjo bolt?
That's a great question.
All right.
So this, this is what we're after.
This wire here comes down to here.
Hopefully we can salvage these brake lines.
So Dan, so me and everybody, this is a banjo bolt.
And what this allows is fluid to come in here, go up through the bolt because it's hollow
and then through this hole.
So if you look at your brake line, see that hole down here, when this comes in, so fluid
is transferring up through the bolt and then into this fitting that makes sense through
that side hole.
So that's how they allow fluid to move back and forth.
Pretty cool.
And then it flows through and it makes music.
Okay.
So we need to get some air blown through here to make sure that they are free.
Boy, this is going to be a chore, I tell you what.
I guess let's start by taking this off.
What?
The wrench hit the sight glass.
Oh no.
Oh, Craig.
Never had that happen before.
First time for everything.
Apparently.
Better be careful, I'm going to break that mirror next.
I'm kind of asking a lot to save this master cylinder anyway, so.
Are you thinking it's going to need to be replaced?
It could be, yeah.
Until we're done cleaning this, honing it, rebuilding it, painting it, fixing the thing
I just broke.
It might just be better off.
There we go.
That's ugly.
Oh, Craig, that's nasty.
Sure is, my friend.
Okay.
So it's already, I broke the sight glass.
So I'm not sure how these come out.
It's like a press in.
And apart from just breaking the glass more.
This is just me learning, Dan, how to fix my screw ups.
We're all still learning.
Always, all the time.
Always, all the time learning.
If you think you're done learning, you're wrong.
You're done giving up.
Okay.
There we go.
There is one sight glass ring.
What do you think is the price difference between the whole new master cylinder and the sight
glass?
I don't know.
I, my guess is we can no longer get the master cylinder new.
I can put an aftermarket one on and it's going to be fine, but I'm, I'm curious.
I'm curious to see what they offer there and what our options are.
Since I've done screwed up.
Okay.
Let's pull this off.
Yeah.
And now while we're here, let's check the switch to make sure we got pixies flowing
through this thing.
No.
Depend on, depend on how the wires contorted.
I'm wondering there's probably a, an issue here with the wire.
What we need to do is replace the piston and the seals inside this piece here.
We have all this nastiness in there.
So we have to figure out if we're going to be rebuilding this and fixing it or replacing
it.
Let's set that aside for now.
Just kind of act like that didn't happen.
All right.
What do we got next?
Moving on.
Put that somewhere safe.
Don't break the mirror.
Don't break the mirror yet.
Aye, aye, aye.
Let's see here.
Okay.
So we have new seals to go in there and new brake pads to put in.
Let's get that done.
I tucked rags in between the piston and the other side of the brake caliper, because when
I put air in here, this is going to pop out and it's going to come out with a tremendous
amount of force.
Never, ever, ever have your hands, fingers in here.
It will maybe even take them off.
Should I be wearing safety goggles right now?
It's up to you if you want to be that kind of guy or not.
Dan puts the camera down, goes and gets his safety glasses.
I'm literally going to put the camera down and get safety glasses, because I am the kind
of guy that likes to see.
There it goes.
So this is exactly why I pulled this off.
See all this crud in here?
So what that does is, that gets hung up in the brake caliper bore in here.
When you let off your brake lever, these pistons will actually just move back just a hair,
and that takes the drag off the front brakes.
So if you ever pushed a bike and you heard like a little scraping on either your front
brake rotor or the rear brake rotor or something when you have disc brakes, that's what it
is.
The piston isn't returning all the way back in the caliper.
Maybe it's got some grime like this on it or something.
That's why we're doing this.
And we're going to do all three calipers.
That way we know they're all fresh, they're all clean, they're all ready to go.
I'm going to be replacing this outside seal, this inside seal, and these two rubbers.
And I'm going to get everything in here nice and clean.
And I'm going to get this nice and clean.
And then I'm going to blench bleed.
Then I'm going to bench bleed the brake.
So I'll actually get fluid in here.
I'll make sure that this cavity between the piston and the caliper isn't trapping air.
So then when I do a final bleed on the brakes, I don't have to get all the air that's trapped
in the caliper out of the caliper.
That can be a real nightmare.
So generally with master cylinders and brake calipers, we're going to bench bleed them
first.
Then when they're on the bike, you do the final bleed and you're set to go.
Say bench bleed the brakes five times real fast.
I can't even say it one time kind of slow.
Yeah, these pistons aren't the best.
They're pitted through the chrome surface.
Those are pits.
So that's never good to have on a sealing surface.
But I think what we're going to do is get these cleaned up the best we can.
Then we're going to make sure that we have those sharp edges knocked down.
That should be sufficient to get this bike back on the road.
After all, this is just a, you know, run to the hardware store kind of thing.
Oh my, is that all goop?
Oh yeah.
Look at this old brake fluid here.
Delicious!
That's not supposed to be.
Yep, that is crusty as can be.
Yeah, seeing that bleeder is clogged.
I'm sure we got all of our parts and pieces here.
New ones, old ones, all the ones, and then these here, just simply pull off, we'll get
that cleaned up.
It's pretty gross.
We'll stick this in here while it's warming up.
And we'll start taking this one apart.
See, these pads were really contaminated from the leaking fork seal.
That one didn't take a lot of pressure, so that one wasn't really stuck that bad.
I bet you that piston's going to look a whole lot nicer on this one.
Eh, we still have some issues there.
Yep, definitely good we're doing this.
This is the stuff you run into, you know, when you're trying to get old bikes back on
the road.
I mean, just be ready for it.
Damn, I'm wearing safety glasses.
Geez, I got it sparkled on my speckles.
That'll get hot.
And once that's up to temperature, we will hit the button there and go bzzzzz.
And we'll let it do that for a while.
And I have more brake pads coming.
I have more of these kits coming.
And then we have this here.
So we went now, as far as we could go there on those brakes.
Oh wow!
What?
Um...
What happened?
Ha!
Oh, it's not supposed to do that.
Here, wait.
I don't think it's supposed to do that.
I don't think it's supposed to do that. That's like a separated exhaust. Right. That's beyond cracked.
Welcome to my can of worms.
Biscuits and daisies. Okay. All right. All right. All right. All right. Hold on here before I get too worked up about all this.
Okay, there's a clamp here so it's gonna come off number two cylinder number one cylinders welded
So it looks like number one cylinder and I'm gonna have to pull that up here and then that'll come off
Okay, let's hope that these nuts come off
Okay. Well that one was pretty much loose
It was that one
Need to do it without
Pulling the bike off the stand. Can you see the problem now? Oh
Might be a little leak. Yeah, I think it has an exhaust leak there
We're gonna pull this crash bar in order for this all to clear
So I was hoping everything would slide out
That's not gonna slide out because it's like this needs to go
Now what's
this is like a
Puzzle, but you like puzzle. I do like puzzles. I'm not having a bad time. I'm just having a
unexpectedly
Good time. Yeah, right. Yeah. Yeah
Sometimes you got to break up an exhaust before you make up. Yep
That's right got to break a couple exhausts to make an omelet
I've made some omelets and almost broke my exhaust if you know what I mean
It's so close. Just wiggle it off. You know, the problem is once we fix it, it's not gonna wiggle back on
Maybe that's why it's broke. They couldn't get it off
And it looks like the only other thing holding this on is a hose clamp possible
Now we're getting some wiggle room my friend
That is it's not supposed to be like that this thing was broken for a while though and see all the rust and dirt
Okay, so that all gets
Stuff just keeps falling off now where'd I come from up in here somewhere
I'm sure it was important if it was important. They wouldn't made it that it could fall off like the front of the boat
Okay, so let's heat that up. Maybe I can knock everything out this way
Is it coming out no, you know what that means I
Saw this move snap crack a pop. Yeah, see
Just took a little heat
Now is it moving? I couldn't quite tell
Yes. Yes, it's out
It moved and I think it moved a little bit. That's to say something then the exhaust attacked me. Yeah, that's what it was
Yeah
Fun. All right. Well, that's gonna be a thing. We need to do to let me wash my hands
Well, that was a lot of unexpected doing just to get the rear wheel off
I didn't have to see him and I build the exhaust system back together
Yeah, they're just happy little fun things that you get to do happy fun little things I get to do now
We're back at it. Where were we?
I'm loosening up these brake lines a while because they're all coming apart because everything's getting cleaned and freshened up anyway
So so I'm just loosening this stuff here while it's still secured on the bike. So it's uh, you know easier to work with
So I'm gonna pull the brake line and let that drain
As flimsy as can be
Oh yeah, oh yeah, buddy. Okay, I'm gonna lift this up a little pull that axle
Oh glad it knocked that over
Spent all that time trying to keep things nice hasn't been enough things seeping out of this bike all over your workbench
I feel like a doctor. I wash my hands. I am kind of like a doctor. Mm-hmm
Oh, you don't wash your hands enough though. You're more like a you're more like an 1800s doctor. Oh you hurt
Let me put leeches on you bullet wound. Here's alcohol to drink, of course
While we saw the leg off shot in the thigh. Let me do a lobotomy
Push drive excellent
Bike looks amazing, right?
Sometimes you got to crack a few ducks to have an omelet. That's what they say. What's the difference between a chicken and a pig?
That's one of those farmer jokes
Yeah, what's how's that go? What's at breakfast? What's the difference between the chicken and the pig?
The chicken may be dedicated but the pigs committed
Cuz the chicken just poops eggs for you every morning, but the pig you have to kill to get the bacon. Oh, there you go
Okay, gotcha
Jokes are so much more better when you have to explain another person
So we made some really good headway on this bike so far. We have the front forks redone
We have one of the front calipers redone
I broke the master cylinder, but I think I can find something to make that work. We have to weld the exhaust
I have to put on the rear tire
I have to pull the valve cover to check the valves and get that in still have to rebuild the carbs
I am waiting on parts to come. I think we got everything done
We can get done here at the moment and it's Friday at about 4 30. So have a great weekend guys
We're gonna get this bike wrapped up when the parts come. Thanks for watching. Don't forget to Like and subscribe Dan
Put one of our two best videos right here. Thanks for watching. See ya
