Crafting an extraordinary Pavise shield with only authentic materials

Shield of Antiquity
8 followers
3 Video Views·Nov 13, 2025
Well... I messed up the woodwork at the start, but the Result was still awesome. So join me on my journey to craft another extraordinary shield using only authentic medieval materials. We'll make our owen glue, basecoat and paint.
I also tried more of the "show, don't tell" in the videos second half. If you want more details watch one of my other Pavise shield Videos ;) .
Comments are disabled for this video.
Servus and hello there. My name is Andrew. I'm from the Shieldery and I love medieval shields.
So thanks for checking out this video because we're gonna build an awesome extraordinary type
of pavisi the so-called wedge pavisi because as you can see it has well a big wedge in the middle.
This piece is from 1480 from southern Germany and measures 88 times 40 times 14 centimeters.
So we got a lot of depth and I had to correct that on my printout because otherwise we would
have like double depth and problems. Let's start by choosing our wood. We're gonna use
those awesome spruce wood planks. They measure four times 27 centimeters. Let's transfer the
shape and cut it out. Let's take care that we don't have a wood hole at the edge because that
could break out pretty easily. But it will be difficult with this piece because it also has
the knot hole right in the middle. Okay maybe like that. Yeah then we spare those three too.
L for left. As you can see this side deformed a bit so I think it's better to just copy that
twice at least for the shape. I nearly forgot to turn it around. We want the direction of the
natural bending because of the drying process to go in the same direction on both sides.
Now we gotta connect them on the correct angle. I calculated 55 degrees per side. Let's hope that
everything goes according to the plan. Let me just check that the power cord and everything
is long enough. Yeah. Oh I cut off too much. How could this happen to me? It also doesn't
look that straight. I'll have to change something back here. That's when you have to keep like five
different things in your mind. It's always when you think this won't be so difficult and then you
don't pay attention and f*** it up. What if I just glue it on with authentic glue of course and then
do the cut again. Let's see whether the measurements fit. At least halfway. 40 centimeters broad.
Huh yeah well nearly. Two centimeters are missing of course but otherwise I have to glue that part
back on and redo it. Why did I cut the shape out first? I could have avoided that mistake. I could
have. It's not enough material to cut it out again. Okay this angers me extremely now but I think the
best option is really to glue it back on with authentic glue of course. Put some dowels in it
and make the cut again. It's always the thing when everything is clear when you thought of so many
things and place the camera in the position you would like it to have and then this happens. Come
on. At least not a few thousand people will see that. Okay always check twice. At least the authentic
glue is quite easy. It's cheese glue we're going to use that consists out of casein which I mixed
one to three one to two with water and now I'm gonna add two thirds of the weight of the original
casein in marsh lime. Then you get approximately 10 minutes to apply it and it's water resistant so
I don't think that it will make a difference in the final result at least. Now in order to press
it together properly and to keep it in place we're gonna drill some screws through there now and
revisit it in two days. Now you see how it gets pressed together. That's what we want. Yesterday
the connection makes a good impression though. Let's not forget to remove the screws that held
it in place. Yeah that's okay. Ah finally. Dang. As you can probably see it would be quite difficult
to carve here on the inside so that's what we'll do before assembling it. If you look at the picture
closer you can see that the cross section changes over its length. We are quite pointy here at the
and get flatter on the bottom. We want something like this at the top which means we gotta
subtract more here but in general I want to keep the edge quite thick because that's like the main
breaking point. Now before gluing it together we can do all of that just with the electric planer.
That looks quite good. I think if we remove more then we can't glue the fabric in there properly
so this is enough. Now we'll have to remove a lot of the outside. I want to bring it down to like
1.4 1.5 centimeters maximum. The electric planer is also a very good tool for that. Now I'm afraid
if I leave it at the vacuum cleaner I just have to empty the bag like three or four times for
that and it's already quite dusty in here so I'm gonna keep continuing with a breath mask.
As we say in Germany and I think that's beautiful. It's time for a montage.
Now that was a very short montage but that's you know a good sign because everything went
okay and now we gotta remove this part up here which we can't reach with the flat electric planer
so we're gonna use the edge grinder for that but we will also need the mass here for gluing the
two pieces together so I'll wait until we glue them together to do that. For the gluing part
we will use the casing glue again which I described before but this time I'm planning ahead.
I want to do something before that because after you set up the casing glue you only got like 10
minutes in which you have to apply that and we will have to glue those together quite precisely
but as you can see here we don't have a 90 degree angle but some unholy 110 degrees. Because of that
I will use the screw trickery because it's so uneven and unsure. I think I'm gonna pre-drill
some holes for the screws. With the board I can keep it in place better. Yeah now they are touching
as good as I'd like it to have. Now let me keep that in place with another clamp or like mark
where it's supposed to be then. Now that fits. Luckily I also got a long eight millimeter stick
for the dowels in reserve because otherwise it would be way too short here. I'm trying not
to glue on my merch shirt in that time because if you got that on your clothes you will never
get it out. It's so water resistant and hard. I'll also add a bit more in yesterday's mistake
and maybe in that knot hole here that also looks kind of suspicious. It's also a good
thing if we got a bit for the dowels left.
Let's set the screws now but with big washes to make sure that they don't
like drag themselves into the wood.
Now the wood will probably splinter a lot when I drill it with the eight millimeter
uh drill but as I said we will sand those parts away where we exit now so that's okay.
I think I'll also add some straight ones in both directions. That makes sense, doesn't it?
Look at that! See you in two days!
I gotta admit at the moment it doesn't look very good but after we finish the carving job
it'll be very good. So let's do that now.
Now the glue we're going to use to connect the fabric and the wooden core is so-called
hide glue. It's a gluten temperature glue which means we can't work with it on room temperature
and have to heat it up to 50 to 60 degrees celsius. If it should get warmer than 60 degrees celsius
the molecules would break down and it wouldn't glue anymore. So we gotta heat it up very carefully
in a water bath and keep a close eye on the temperature. I won't attach the fabric after
the first layer though because we want to give the wood some time to soak in the glue correctly.
This also helps to fill in some of the holes, dents or other mistakes we maybe made before.
It also looks pretty awesome.
It's not as dry as I would prefer it. It's still a bit tappy but we gotta continue because it's
quite late and I want to make a seamless transition between the fabric on the front
and the back side which will also take some more cooling time. Let's attach the fabric now.
Okay I just applied a bit of water on the fabric because it usually shrinks when it gets wet and
in order to avoid that while we are gluing it in place we want to wetten it beforehand so it won't
happen when we don't need it. Now I'm gonna flip it and start from the top to the bottom
applying the glue. I hope I made enough glue. It doesn't look like that much and usually the fabric
Let's keep that warm now and then hopefully in like 10-15 minutes we can continue.
beautiful they are. They again have been done by Einars Schmiede. Thank you. Now let's see
where they belong. We'll have to pre-drill that but that's not a big problem here.
Those are handmade and not that even so make sure that you remember where which was.
How are we gonna flip that? It only sticks out like a millimeter. On the original you can see
that it has been put out to the side but I think when we hit it like that we'll just press it out
again. So we'll have to do it that way now. Similar on the other side. Let's apply two more layers of
our fantastic base coat on the front now and then we can start to paint. By the way don't forget to
like this video if you enjoyed it so far. The YouTube recommendation systems are also getting
weirder and weirder and I'm not the kind of channel who publishes like three videos a month
so if you don't want to miss that consider subscribing and clicking the bell button.
