The M36 Tank Destroyer—often called the M36 Jackson—was America’s forgotten giant of WWII. Armed with a powerful 90mm gun, the M36 gave U.S. forces the firepower to take on German Panthers and Tigers when other tank destroyers were falling short.
In this deep dive, we explore the full story of the M36 Tank Destroyer: from its early development and conversion from the M10, to the vehicles in NMMV’s collection (and why they’re technically not M36s at all), and finally the remarkable story of 1st Lt. Alfred Rose—credited with the longest M36 kill of the Second World War.
Along the way, we’ll cover: • How the 90mm gun transformed America’s tank destroyer doctrine • Why NMMV’s two vehicles aren’t technically M36s, but T71 prototypes • The surprising Cold War story of Yugoslav M36s and their service into the 1990s • The longest recorded tank destroyer engagement of WWII
The National Museum of Military Vehicles preserves these artifacts to honor veterans, educate future generations, and keep history alive.
Timestamps: 0:00 – Introduction to the M36 Jackson 1:15 – Early development: T53 and adapting the 90mm gun 5:30 – Production of the T71 and standardization as the M36 10:20 – NMMV’s two T71s and restoration insights 11:45 – Yugoslavian service and Cold War upgrades 12:30 – 1st Lt. Alfred Rose and WWII’s record-range engagement
It wasn't just another tank destroyer, this was the US Army's answer to German heavy armor. The M36,
a 90mm cannon, a battlefield legend, and the machine behind the longest tank destroyer kill
of World War II. This is its story. The 90mm gun motor carriage, M36,
often called the M36 Jackson, is the United States' last tank destroyer.
While we've already briefly talked about this vehicle before in another video on the channel,
today we would like to do a deeper dive. We'll cover the M36's early development history,
the vehicles in the NMMV's collection, and how they aren't technically M36s,
and finally, the story of the longest kill ever achieved by an M36,
one of, if not the longest range tank destroyer kill of World War II.
The M36 is quite honestly just an upgunned M10. Granted, most M36 models used the better M10A1
but even that upgrade is a part of the M10's development. With that in mind, the development
of the M36 is pretty straightforward. That said, it does not start with the M10.
Rather, we need to go back to August of 1942 with the 90mm gun motor carriage T53.
This was the US military's first attempt at adapting the 90mm gun, previously an anti-aircraft
on a much more mobile chassis. The need for such a weapon was already on the table due to the less
than adequate field performance of the M10 tank destroyer's 3-inch gun. As early as 1942,
that weapon was already having difficulty penetrating thicker armor anywhere beyond
a few hundred yards. Upgrading tank destroyers to a larger weapon, either the 76mm or 90mm gun,
was the next logical step. The T53 sought to mount the 90mm gun in a much more limited
capacity than the M10's 3-inch. It had no true turret and so the gun sat reverse mounted on a
butchered M4 Sherman. Needless to say, this design proved to be less than advantageous.
While other tank destroyer designs like the M18 were designed and produced after the eventual
end of the T53's development, a desire still existed to utilize the 90mm gun. Eventually,
the weapon itself was modified from the 90mm gun M1 into the 90mm gun T7 and subsequently
adapted to use on the pre-existing turret of an M10 tank destroyer. Mounting the gun was not
difficult but the turret was designed for the comparatively smaller 3-inch gun and required
a few changes. On March 3rd of 1943, Chevrolet worked up a wooden mock-up turret which hoped
to solve all the problems the 90mm experienced in the M10 turret. A larger bustle was developed
to balance the gun, which could also fit 11 ready rounds of ammunition. Additionally,
a power traverse was added alongside a manual system. This second feature was perhaps the most
enjoyable for the crews, who previously could only rotate the M10's turret manually. Other
changes included relocating the gunner's controls and sight telescope to the right side of the gun,
adding thicker turret armor and a .50 caliber machine gun and a ring mount.
The simple upgrade was not only effective but also quite cheap. Building the new vehicle would
be as simple as adding the turret to a pre-existing M10. The military immediately moved forward with
the concept. Ford was commissioned to produce two pilot vehicles to be sent to Aberdeen and
Fort Knox for testing in September of 1943. Testing the first pilot vehicle revealed some
small problems, and changes were required to be made, most of which were to increase
crew comfort. Some examples included changing the .50 caliber machine gun from the ring mount
to a simple pedestal, and increasing the size of sponson ammunition racks to better accommodate
the 90mm ammunition. These changes were implemented into the second T71 pilot.
After testing the vehicle, the armored board recommended that a muzzle brake and long primer
ammo be required to help with firing accuracy. These changes, however, would not be implemented
into later production vehicles. In November of 1943, production drawings of what would become
known as the T71 would be released, and a production request of 500 vehicles would shortly
follow. The vehicles would all be expected to be produced at the Fisher Body Tank Plant.
While production drawings had preceded it, on December 9th of 1943, the Ordnance Corps
designed the new combination of the new 90mm equipped turret with the chassis of the M10A1
tank destroyer, as the 90mm gun motor carriage T71. Anticipating that some conversions would
also take place on the original M10 chassis, which featured a diesel engine instead of a gasoline GAA,
that combination was designated the T71E1. Following testing and design refinement,
the US military made a request for 500 T71s to be produced by April of 1944 at Fisher.
The order would effectively hijack active M10A1 production by taking unfinished vehicles straight
from the assembly lines and adding the new turret. From April of 1944 to July of the same year,
Fisher would produce 300 T71s until mid-production supply of M10A1s was exhausted.
To finish the order, the remainder were simply pulled from either the field or from
ordnance depots. Since Fisher had quite a heavy workload by this time, the Massey-Harris Company
was commissioned to finish the last 200 T71s, using turrets supplied from Fisher.
In the end, the order for the first 500 vehicles was completed by the end of 1944.
In July of 1944, the T71 was standardized as the 90mm gun motor carriage M36.
That time, the demand for a new tank destroyer was soaring. Following the invasion of France,
frontline units were encountering heavy German armor, and a 90mm vehicle was duly needed.
Production quickly ramped up and M36s began arriving in France as early as August of 1944.
By this point, the newer M36s were designed to fit a muzzle brake. This required a new
equilibrator design, a stronger elevation mechanism, and a heavier gun traveling lock.
All three improvements were installed after the first 600 vehicles, but the equilibrator
would not be connected until after the first 1400, as none of those have been fitted with
a muzzle brake. Muzzle brakes could technically be installed on the vehicles after number 600,
but due to man hours required, this was rarely done. For later in production,
other changes were made to the M36, like adding space suspension or turret top armor.
However, that's beyond the scope of our vehicles here at the NMMV.
While some online sources state that the NMMV has two M36s, this statement is technically untrue.
Going off of serial numbers, both our gallery vehicle and our other example in restoration
are T71s, members of the original 300 converted for mid-production M10A1s in 1944. Therefore,
we'll be referring to them as such from now on. Keep in mind, of course, that a T71 and
an early production M36 are effectively the same vehicle. Despite being early production vehicles,
both of our T71s feature a late production M36 fork, threaded 90mm barrels to accommodate a
muzzle brake. These threads are covered by thread protector. These newer barrels were probably due
to a simple replacement at some point. Old vehicles will wear down their barrels after a lot
of fighting, and a muzzle brake threaded 90mm barrels are more common. Our first T71 here in
the gallery is serial number 218, manufactured at Fisher in June of 1944. The second is serial
number 300, which means it was also built by Fisher but most certainly in July, right as the
T71 was being standardized as the M36. This makes that vehicle the last of the T71s built as such.
Remember, the next 200 will be converted for pre-existing M10A1s which were returned from
the line and refitted, not built as the T71. Both of the NMMV's T71s were once members of
the Yugoslavian Army as well. Following the Soviet-Yugoslav split in 1958, Yugoslavia was
included in the United States' Mutual Defense Aid Program, or MDAP, which saw them receive
over 300 M36s, including T71s, under the standardized name. While these vehicles never
saw combat with the Soviets, as was the fear, some saw use during the Balkan Wars of the early
1990s. Yugoslav M36s and T71s saw their original GAA engine replaced with a much more suitable
Soviet-built substitute to reflect available parts. Our gallery vehicle possesses its original
T55 engine, and the one undergoing restoration has one as well. That vehicle, however, has since
had its engine removed. Eventually, when our second T71 is restored, we will have installed
the 4GAA, bringing it closer to the line of its original US build. When you think of some of the
longest shots made by a tank, it's likely that you think of a modern battlefield. At the same time,
it's likely that you're thinking of a medium tank or main battle tank, not a tank destroyer.
Perhaps 1991 comes to mind, where during Operation Desert Storm, a British Challenger 1
knocked out an Iraqi T55 at a distance of 5,600 yards, roughly 3 miles. It is indeed an iconic
story for a reason. But in 1944, an M36 would set what is regarded by most to be the longest tank
destroyer kill of World War II. If we were to separate the achievements of a tank destroyer
from that of tanks, it could even be argued that this was the longest shot made by that
type of vehicle in history. The subject of the story is Alfred
Francis Rose, often called Al. He was born in Philadelphia, Pennsylvania on the 17th of February
1919. Not much is known about his childhood. The next time we see Al appearing in the record books
would not happen until 1934. At this time, Al would have been in high school around the age of 15,
and this is his yearbook photograph. Again, Al disappears in the records,
and we do not see him mentioned again until October 30th of 1942, his enlistment date.
On this document, we also see his prior occupation listed, Undertaker. While we do not know much
about his early enlistment, we do know that he would make his way into the 7th Armored Division
814th Tank Destroyer Battalion. The 814th was activated on May 1st of 1942, Camp Polk, Louisiana.
Originally issued M10 tank destroyers, the 814th would make landfall on France on Utah Beach in
early August of 1944. In October, they would be re-equipped with M36s. They would push across
Europe, participating in operations across northern France, the Ardennes, central Europe,
and the Rhineland. The Rhineland, in particular, is where our story takes place.
On December 1st of 1944, the majority of the 814th was stationed in Billitz under battalion control
across Holland. There were, however, some exceptions. One platoon of Company B with
three M36s total were dug in between Promerne and Suggraf, Germany, just west of Cologne.
Leading that platoon was 1st Lieutenant Alfred Rose. The platoon was given simple orders. Fire
at any target of opportunity to the northeast. The men, therefore, were on high alert for enemy
activity. The day prior, on November 30th, they had spotted a German Panther. Both direct
anti-tank fire and indirect artillery support had caused the Panther to retreat, but it was
not destroyed. On the afternoon of the 1st, around 3.50 to 4pm, Lieutenant Alfred Rose was
sitting in the gunner's position of his M36, experimenting with the control so he could
familiarize himself with them. That was, until he spotted an enemy tank to the northwest of their
position, a German Panther. Deciding that the tank laid at a great distance, Rose sighted in at 4,600
yards, the maximum range of his M36's direct telescopic sight. He fired once. The round
traveled for nearly five seconds before making impact. It was just short. Lieutenant Rose then
aimed above the reticle and fired another round. This time the shot flew above the Panther.
Believing that his first round was closer, he dropped the reticle back down to 4,600 yards.
This time, the shot hit. Lieutenant Rose fired five more times, achieving two more direct hits.
When the third shell penetrated the enemy Panther, it exploded. This kill gave 1st Lieutenant Alfred
Francis Rose and his vehicle the longest M36 kill of the Second World War.
The M36 was a vehicle that was introduced as a mere upgrade rather than an entirely new concept,
but has certainly proved its worth to those who needed it on the line, men like Lieutenant Rose.
Like most other US tank destroyers, it was phased out after the war in favor of newer medium tanks
and later main battle tanks. But despite their eventual obsolescence, it is always good to see
these vulnerable military machines surviving into modern day, especially after modern military
service in places like Yugoslavia. National Museum of Military Vehicles is fortunate to
have two of the oldest vehicles of this type here in our collection.