How to Paint WATER, TREES and MOUNTAINS

Landscape Oil Painting
5 followers
Hi everyone, Sam here, welcome to my channel. Well my art studio is a bit of a mess at the moment
and it's such a beautiful autumn day out here in Queenstown New Zealand that I thought why
not do the introduction to this video outdoors on the lakefront, because the view behind me
is the feature of this particular painting tutorial. So last year I was commissioned to
do a painting of that view, so in this video I'm going to show you how to paint mountains,
water and trees, three great subjects for a landscape painting. I'll show you the composition
and design behind the painting and the colours that I used, I'll also show you the blocking-in
stage and then I'll give you some specific tips on painting mountains, water and trees,
and then we'll wrap up the video by adding the final details which brings the painting together.
If you like this video be sure to hit the subscribe button and also check the link below,
there's some written notes that accompany this video. If you want to have a go at painting this
yourself feel free to copy the painting and use the photos, it's all good. Anyway, bust out your
paint brushes and let's roll the tape. I'm working on a 40 by 70 centimetre canvas and I'm using oil
paints and as you can see there I've toned the canvas with a layer of burnt sienna which helps
to warm up the painting and it also adds some vibrancy to the colours. So I start sketching out
my composition with burnt sienna and a number one round brush and I've mixed it with a bit of
Liquin and what Liquin does is it not only thins the paint but it also speeds up the drying so
normally my painting should be touch dry within 24 hours which is really useful if I want to paint
quickly. Now this particular view in Queenstown is very well known and it's been photographed and
painted many times. It's a beautiful view but from a composition perspective it's a little bit tricky.
Now normally when I paint landscapes I usually move things around to improve the composition
but what with this particular view being so well known it's a lot more tricky to move things
without it being obvious. The lake and mountains in this area are stunning and beautiful and I
always want to paint them but from a composition perspective I've always found it really tricky
to get harmony and rhythm into my paintings. So I was thinking about how could I make this
particular painting a bit more harmonious and what I decided to do was look at some old paintings
from my favourite 19th century painters and see if I could get some ideas of how I could
approach my painting. And one of my favourite painters from the 19th century was a German
painter called August Wilhelm Lou and he was born in 1818. He painted lots of scenes of Norway that
featured high mountains lakes and fjords so I had a look at his paintings and it gave me some ideas
of how I could approach my own painting. One of the things that I love about August Wilhelm Lou's
paintings is the way he achieved the low chroma depth in his mountains. Chroma refers to how
saturated a colour is and Lou had a way of making his mountains recede in the painting yet still
look vibrant organic and colourful at the same time. I've incorporated a similar design to one
of Lou's paintings in my own painting here and I've made Deer Park Heights and the Remarkables
Mountains in the background the main focal area of the painting. The supporting elements in the
painting including the rocks the willow trees and the direction of the clouds adds a bit of flow and
rhythm to the composition overall. The colours I'm using for this painting include titanium white,
burnt sienna, yellow oxide, cadmium yellow, cadmium orange, perylene crimson,
ultramarine blue and phthalo green. In order to paint this landscape I'm using a range of flat
brushes, rounds and dagger brushes. So now that I've finished sketching out the composition I start
blocking in the painting. Using a number 10 flat brush I start blocking in the shadow areas of the
Remarkables Mountains in the background and these mountains are going to set the scene for the whole
painting because I'm going to gauge my light and dark values from this shadow area. So I mix the
shadow colours of this mountain with a combination of ultramarine blue, burnt sienna which helps to
take out some of the saturation of the blue, then I tint it a bit with a little bit of perylene
crimson and then I mix in titanium white to lighten the value. Now value just refers to how light or
darker colour is. Next I get straight into the clouds and using a number 10 flat brush and
titanium white mixed with liquid I start painting the highlights and forming the shape of the clouds.
Immediately afterwards I start applying a cloud shadow mix which is a combination of ultramarine
blue, burnt sienna, perylene crimson and titanium white, the same colours I was using for the
shadows in the Remarkables Mountains. So now I'm just blending my cloud shadow mix with the
highlights that I just applied earlier and then I use my brush just to blend and form the basic
shapes of the clouds whilst still on the canvas. I mix the colours of the sky with a combination of
ultramarine blue, a very small amount of phthalo green and titanium white. Then once I've painted
the sky I then focus my attention on the areas of the Remarkables Mountain where the sun is
illuminating the rock faces. For this I'm using a combination of yellow oxide, ultramarine blue,
burnt sienna, a tiny bit of perylene crimson if required and a lot of titanium white.
I have to be mindful to create a low chroma colour mix for the mountain highlights here
because if the colours are too saturated they'll just jump forward in the painting and then the
illusion of depth will be lost. For the next stage in this painting I start focusing on the mid-ground
and the trees as well. So I start with Deer Park Heights which is that hill there and I start by
painting the shadows. This is a combination of ultramarine blue, yellow oxide, a bit of
perylene crimson and a tiny bit of titanium white. As Deer Park Heights is in the mid-ground the
shadows are going to be darker than that of the Remarkables Mountains in the background.
For the tree shadows I pretty much use the same colours, ultramarine blue and yellow oxide as my
base and then mixing in some burnt sienna. The shadows in the trees are likely to be some of the
darkest values in the painting. So using a number eight flat brush I start focusing on the grass
on Deer Park Heights. It's that lovely meadow green colour that you get in early summer but
because it's in the mid-ground I need to be careful that I don't make the green too saturated
otherwise it will jump forward in the painting. So I start by mixing a combination of ultramarine
blue and cadmium yellow which I'm going to use as my base. I now need to reduce the saturation
of the green and I do this by adding in some yellow oxide, some titanium white and then I
also add some colours that contain the opposite to green on the colour wheel, so colours that
contain red. This can include cadmium orange, perylene crimson and burnt sienna. When using a
colour opposite in order to balance out the green a little I often use cadmium orange and a little
perylene crimson mixed together and then mix that in with the green. Moving on to the willow trees
I use a number eight flat brush and a combination of ultramarine blue, cadmium yellow which again
I've used as my base. Then I add in a bit of cadmium orange and perylene crimson to the green
just to make it look more organic and natural. Also if I need to lighten the value I can add in
a little titanium white. Now at this stage of the painting I'm really not concerned with detail
whatsoever so I'm using very broad gestural brush strokes to block in the basic colour of the trees.
One thing to keep in mind when you're painting trees is that the foliage is generally darker
in value than grass and you can clearly see this in my reference photo here.
This was one of the photos I used for this painting. Moving on to the water I start adding
this with a number eight flat brush and this is just a combination of ultramarine blue, a tiny
bit of yellow oxide, a tiny bit of phthalo green and a lot of titanium white. I'm making sure I
leave some gaps in the water so that I can paint in the reflections of the willow trees
and again as with the trees I'm not concerned about detail whatsoever I'm just getting in that
basic colour. I paint in the shadows of the rocks which is a combination of ultramarine blue, burnt
sienna, bit of perylene crimson and then for the areas of the rocks that are in light I use the
same colours but with more titanium white and also a little bit of yellow oxide. I complete the
blocking in stage by painting in the grass which is the same colours that I used for the willow
trees but I've added a bit more titanium white to lighten the value. After that I allow the painting
to dry so I can then begin the next stage which is building up the detail in the painting.
Now given that there's a lot to cover in this short video for the rest of the painting tutorial
I'm just going to focus on the mountains, the water and the trees so I hope you get some good
tips from this that you can apply to your own painting. So using a number six flat brush and
the same colours that I use in the blocking in phase but with more titanium white I start defining
the form of the remarkable mountains in the background. Now the one thing I'm quite conscious
of is I don't want to add too much detail in it because it will be a bit of a distraction
in the painting so as it's in the distance I'm going to keep the detail to a minimum.
I also add some reflected light in the shadow areas of the mountain and I'm using the same
colours that I used in the blocking in phase but with a tiny bit more titanium white just to
lighten the value a little bit and I'll be sharpening up the rock shadows as I go along in
the painting. At this stage in the painting I've done quite a lot of work on the clouds
and the background mountains and also Deer Park Heights, that hill in the mid-ground.
So next I focus my attention on the water. Now there's no doubt that water can be a pretty
complex structure and a challenge to paint for any artist so what I normally do when it comes
to painting water is just try and break it down into its component part. So the first thing I
approach is these shadows and if you take a look at the reference photo here you can see these
shadows in the ripples and I think of those ripples as little hills with the light shining behind it
so the face of the ripple is in shadow. Using a number two flat brush and a combination of
ultramarine blue with some yellow oxide I start forming the shadows of the ripples.
So now that I've established the main part of the shadows in the water
the next component to focus on are the peaks and the troughs. So if we just take a look at our
reference photo again you'll see that the peaks and the troughs of the water here are mostly
reflecting the sky and the mountains and they're lighter in value. So again using a number two flat
brush and a mixture of ultramarine blue with a little yellow oxide and a lot of titanium white
I start forming the peaks and troughs of the water that are reflecting the sky and mountains
and in general I paint these directly behind the shadows of the ripples. So if we think of those
little ripples as hills again the areas I'm painting are the areas that are in light.
So now I just need to leave the water to dry before I can add some detail to it at the end
of the painting. So next I focus my attention on the willow tree in the foreground. The first thing
that I do is I mix up a green that I'm going to use for the foliage in the tree and I'm actually
using the same combination that I use in the blocking in stage so I'm using cadmium yellow
and ultramarine blue as my base and then I'm going to harmonize and earth that green by mixing in
colors that contain a complementary opposite to green which could include cadmium orange,
perylene crimson, even burnt sienna as all these colors contain red which is the complementary
opposite to green on the color wheel. And then also if I want to increase the saturation I can
also add a little bit of phthalo green into the mix. Using a three-eighths of an inch dagger brush
I start expanding the form of the canopy there and feathering the foliage and using the same
brush I also reinforce those shadows within the tree and the shadows as I said earlier are going
to be some of the darkest values in the painting. In order to build up the detail of the tree canopy
I'm going to be using a combination of number two flat brushes, number one rounds and three-eighths
of an inch dagger brushes. With each progressive pass of the foliage I'm going to be adding lighter
tones so I'm still using those same colors I used to mix the green but I'll be adding more
titanium white in order to lighten the value. I built up the detail of this willow tree over
several days and the advantage of using Liquin Original as my medium to thin the paint is that
it speeds up the drying so my painting was touch dry by the following day which means I could carry
on adding more detail to the foliage. I find the dagger brushes very useful in painting tree foliage
as you can use the tips to paint the suggestion of individual leaves which is what I did with
this tree. Using a number two flat brush and a combination of titanium white mixed with a little
bit of burnt sienna I start adding some of the snow on top of the Remarkable's mountains.
Adding a bit of burnt sienna to the titanium white just helps the snow recede so it's not
jumping forward in the painting. After painting the snow on the mountains I turn my attention
back to the willow tree and using my sky mix I start filling in some of those negative spaces
around the foliage which helps emphasize the form of the canopy of the tree overall. I paint the
areas of snow that are in shadow on the Remarkable's mountains using a combination of ultramarine blue
a little bit of perylene crimson and titanium white and then I turn my attention again back
to the tree and start painting in the branches and the main stems. For this I've used a combination
of ultramarine blue with burnt sienna and a tiny bit of perylene crimson and then for the areas of
the trunk that are illuminated I've used the same colors but added a lot more titanium white.
I'm now at the stage of the painting where it's all starting to come together
and all that's left to do is to add final highlights and details.
I save my lightest values until the end of the painting so here I'm just adding a few
highlights on the leaves of the willow tree. I also paint in the suggestion of fine twigs with
a small round brush. Using a number one round brush I paint some highlights on the rocks where
the sun's reflecting on the wet surface and then I also paint the houses on Deer Park Heights
which is an important detail in this view. I add some white water to where these small waves are
crashing on the lake foreshore and in general I just tidy up the water by adding some more
highlight to the peaks and troughs where required and with that the painting is complete.
So before I end the video I'll just go over some of the key points that I covered.
Obviously there's quite a lot going on in this painting and I wasn't able to cover everything so
I've just focused on some key areas which included the water, the mountains and the trees. So in
general when I'm blocking in the painting the main thing I want to establish is the whole tonality of
the painting and the colours. So I use as bigger brushes as I can get away with to give it that
more painterly effect but also so I can cover ground quickly and so long as all my colours and
tones match up in the blocking in stage I'm generally pretty happy and it's much easier to
then work on the detail afterwards. When painting the mountains I was conscious of the fact that I
didn't want it overly detailed because otherwise this would just be confusing on the eye and
overall I've used low chroma colours. Painting water can be pretty tricky as it's such a complex thing
to paint so I always just break it down into its component parts and I treat the ripples like
little hills that in this case are backlit. The troughs and peaks of the water are reflecting
the sky in the mountains and so they're going to be lighter in value. I used a combination of
dagger brushes and number two flat brushes to paint the foliage of the trees which I built up
in successive layers which helps create the form of the tree. And finally I always save my lightest
values and details till the end of the painting. One last thing I might add that I think if there's
one thing I would do to improve this composition was perhaps I would have added a boat in the lake
just to add a bit more of a focal point. Thanks for watching I hope you enjoyed this video and
that you found it useful. If you did hit the subscribe button below and also don't forget to
click the link below for the written notes that accompany this video if you want to have a go at
painting it. If you want to see more of my art then check out my website which is samuelerp.com
and I'm also on social media including Instagram which I post to frequently so if you just type in
samuelerpartist you'll find me there and I'm also on Facebook. Anyway as I say I hope you
enjoyed this video and until next time I will see you then for more videos. Bye!
