Giving away My Top Tips and Tricks for Painting Mountains

Landscape Oil Painting
5 followers
Hello, I'm Paul from Paul Ransnott. Welcome back to the studio.
Over the years I've been asked dozens of times about my top tips and tricks for painting mountains
so I thought about time I made a video all about it so I've chosen to do this one.
It's a Bob Ross classic, Mountain Rhapsody. I've chosen this mountain because it really is all
about shape, size and form without too many other complications of colours. It's a lovely peachy
scene that would grace any wall but it has all the essential elements to learn about how to paint
your very best mountains. Anyway, sit back of course with a cold drink or a cup of tea.
Happy painting people. So here's my canvas. Actually it's not, it's paper. I give it two
coats of acrylic paint but it started out as this, decorators lining paper. A cheap alternative
to practice on. For my palette I'm using this. It's a paper disposable palette but it's actually
freezer paper. I tape it to the back of my palette and I just use this from a roll and it's manufactured
by a company called Reynolds. I'll leave links to all of these products down in the description below
but this is a cheap and easy way of getting going with your painting.
My brushes for today's painting are these Bob Ross one inch landscape brushes. An old one
and a nice new one. I'll be using a filbert brush, a fan brush and a liner and of course
a Bob Ross palette knife. I'll be applying a coat of Bob Ross liquid white oil paint.
This is a wet on wet oil painting technique and this is my first tip. Apply the liquid white
evenly. I divide my canvas into sections and do one part at a time and then finish off with
long flat strokes. My next tip is always set out the horizon line. I use these matte pins
pushed into the side of my canvas and I measure using my one inch brush. My first colour will be
yellow ochre and a little touch of alizarin crimson. I want a sort of soft peachy glow
to my background sky. I'm still using that old brush to apply this. Later on I'll switch to
the nice brush for the more delicate work. My next tip is always start in a corner. If the
colour's not quite right at least it won't be dead centre of your painting. I start out a little
paler than I think I need it. That's another good tip. If you go too strong too quickly it's much
harder to fix it. I'll do a little bit of time lapse and build up my colours. I like to work
up to the value that I think will work the best for my painting. Now straight into a little bit
of dark sienna. I want a few simple soft cloud shapes. Again nothing too detailed for this
painting. My next top tip is know where your mountain's going to live. There's no point in
painting a perfect cloud and putting a mountain on top of it. Painting is really like a game of
chess. You've got to think about three or four moves ahead. Once again think about the shape
and form as you paint. Stand back often and once you have the size and the position sorted out
you can go back and darken them slightly. I've switched to a nice clean dry soft brush
just to blend out these clouds a little more, taking out some of those brush marks.
Don't overdo it because those edges will soon disappear. Notice how I lay my brush on its side.
That's my next tip. The sides of the brush are soft and better for blending clouds.
Now time for a mountain. I've mixed together midnight black, alizarin crimson, some dark
sienna and a small amount of phthalo blue. I want a really good dark inky colour. This is a sticky
dry colour perfect for breaking some snow on, so don't thin it down. Next a bit more planning. Take
a small dot of that colour and work out where the main peak of the mountain is going to be.
About one third the way across the canvas is a classic starting point. It's a place of interest
for your eye and I make the first little v-shape as a reference. It's not as high as it'll end up,
I save a little bit of room above it so I can grow my mountain if I need to. And that's possibly
one of the best tips and tricks for painting mountains that I can think of. Allow some space
for growth. As you can see I've added the suggestion of a couple of little mountains
in the background. This will add depth and distance to our painting but they want to be
quite faint so scrape off as much paint as possible. I'm going to use my filbert brush just to smooth
out some of the paint. Keep the darkest part of the mountain at the very peak and let the edges
and the base of the mountain become pale, blend out so it creates a sort of misty distance to
your painting. For a suggestion of some snow I'm going to use some titanium white and a little bit
of that peachy color from the sky. Lay your brush on the mountain and just gently drag. It's a sort
of soft palette knife effect and I want the paint to break on the mountain. Here's a little close-up.
I've changed my colors a little bit. I wanted to stand out against the pale background sky
so I try a couple of different varieties. I think something a bit brighter is what I need.
Don't be afraid to play with your colors and if all else fails pick up your palette knife and
scrape it off and start again. That's yet another top tip. Don't be afraid to go back and change
things. Better to spend 10 or 15 minutes repairing your painting than to live with a painting you're
not totally happy with. For a little shadow color I fix up some white, some phthalo blue and a hint
of black. Remember the sunlight comes from the right so the shadows fall to the left. Be consistent
when you add highlights and shadows to your mountains. It really stands out if you switch
direction on a different peak. I'll use a little time lapse and repeat that process on the peak
on the left. Again highlights to the right, shadows to the left. So here's how our mountain
looks so far. These two peaks are quite dominant and this looks a little bit small. I need to lift
it up and make it more dominant so let's raise the center of it. This is the reason why I left
that little bit of extra room above the main peak. I can always grow it I just can't shrink it.
Also notice how I keep the dark color right at the very top of my mountain. That's another
big tip for painting a good mountain. Keep the dark at the peak and blend out the base so you
end up with a lovely soft misty layer. To help you see the shape of your mountain in advance
scratch a little center line and pull the paint left and right. It almost creates the shape of
mountain before you apply the snow. To highlight my mountain I'm going to use my palette knife
this time. Take a little white, a touch of indian yellow, a little bit of that ochre and peach color
and marble mix it. Don't overdo it and compare it to your mountain. Your eyes don't move color very
well. We think we can check a color by simply looking at the palette and looking at the painting
but you really can't. I realized that my color was just a bit too dark so I added a little more
titanium white. Now a small roll of paint and a super light touch. Stick the knife to the painting.
I say stick because the paint is really really sticky and it will grab hold of that lovely dark
underpainting. A small roll of shadow color. Look how marble that is. Blue, black and a touch of white
and again don't forget shadows are to the left and highlights to the right. Repeat this process
adding small rolls of paint. Hold your knife with a very gentle touch and use the sticky white paint
to stick to the dark underpainting. It's just a matter of gluing things together. Don't put your
finger on the back of the knife. Notice I always hold the knife around the silver bezel. Paint out
the way that's not quite right so I push that paint away in the center. See push it out then let
the paint break. Notice how much of the original dark color you can still see in my mountain.
This is probably one of my absolute top tips and tricks for painting mountains.
Save the dark in your mountain. It's your best friend and give your mountain so much more
depth and distance and character if you keep it. I use my nice brush again just to tap out
the base of my mountain and to add more of the misty effects. That mist is a huge benefit when
it comes to adding the next layer. It makes things stand apart. It pushes the mountain back
and brings the mid-ground a little closer. You can even add a few little footy hills as
Bob would call them. Just tapping on a little bit of the peachy white color. Look at those
directions again. I tap to the left and I tap to the right to keep the illusion of a three-dimensional
shape on my painting. So here's my finished mountain but something's changed. Can you spot it?
Yes, the little peak over here has been absorbed into the main mountain. It was just a bit too
crowded back there and I think this looks better. Let's work on the mid-ground for our painting.
I want a soft lavender color so I've added phthalo blue, some alizarin crimson and white together
and I often smudge a little bit onto my canvas just to be sure it's going to work.
Now I'm happy with the color. I load my fan brush very well. Both sides give it a little wiggle
and I want to paint some trees. I'll cover up that smudge at the same time. Another top tip,
don't be afraid to test your colors because you can cover them up.
Drop in the center line of those trees and tip your brush handle up and use one corner of the
brush just to press against the canvas. The bristles create the illusion of thousands
and thousands of little pine needles so don't let the brush skid when you do this.
If you enjoy my tutorials and you want to support the channel it's very easy just to
maybe even leave a comment. You can also subscribe to the channel. It doesn't cost
anything and if you ring the little bell it means that every time I release a new video
you'll get a little message. If you want to do a little more you can always buy me a coffee.
I spend the money on new materials. Thank you. For some small details I've added a drop or two
of thinness to my paint and I'm going to use my liner brush just to add a few tree trunks.
Let's put some snow on those trees. I've got my titanium white, I've added a little bit of liquid
white to that paint to make it soft and a little bit thinner so it sticks more easily to the dark
color. As you can see I've tinted it a little bit of purple and blue. See how I push into the paint
to get a little tiny ridge of paint and that's what I'm going to be using to stick onto my trees.
Just touch mainly on the right side that's where the sunlight's coming from and as the paint runs
out I'll do a few shadows on the left side of the tree. See how much dark I'm keeping though?
Just like the mountain, save the dark. It's your best friend in your painting.
A neat little trick to add a shadow to the base of those trees is to use the fan brush on edge.
Just drag some of that paint across. It creates shadows and depth in your painting. I might come
back and make some changes to this later on so let's not overdo this step. I wipe my fan brush
and I'm reloading it with more of that inky blue color. Really groom it through well and bring your
brush to a nice chiseled edge and let's plan where we're going to put the next tree. I want a nice
big one on the left so I put in the center line. Just touch so we know where the tree starts and
where it finishes and I want the trees on the right to be a little deeper into the painting.
Once again, top tip here, plan ahead. Notice how I paint this tree the same as I did the background
trees except this time I'm going to do the center of the tree first. Fir trees are usually quite
dense in their middles so fill it up well. Once you've got that in position you can work out how
wide you need it to be. So I make a little mark and then I can go back over it and grow it slightly.
I find that when people are learning to paint fir trees one thing they struggle with is that
they go out of shape very easily. They have square tops and then huge wide bases to them.
So start out with just little tip taps at the very top of the tree and put a little marker down at
the bottom. I repeat that process with the trees on the right. Make sure that the mountain and the
tallest tree are not the same size. I use lots of dark paint and fill it in well, this time three
little trees. This little tree on the right is in the shadows so I've used some of that blue color
I highlighted the background trees with just to add a suggestion of some snow. The one on the left,
the same thing, he's just got a little bit of shadow there as well. And again I grab some of
that color and pull it out to create a shadow. For the main trees the highlights are going to be
titanium white and a little bit of that peach yellow color. Again, see I pull it out and give
it a little push. Gently touch the tree. The light is from the right so that gets the most of the
paint. Tip your brush down and gently touch. If you have trouble making the paint stick
here's a top tip. Add a little tiny drop of liquid white to it but remember you have to use
paint with liquid white. Liquid white on its own is no good for highlighting. It's just too thin
and oily and will instantly sink in to the dark color which then ruins the illusion that you've
got a three-dimensional shape with highlights and shadows. All these top tips for painting mountains
are things I've learned over the years and touching off a little bit of that contaminated
paint for your brush is another good tip. You can quickly ruin your highlight colors.
I'll add some more highlights to this part of my tree and as you see my paint runs out
so I do the shadow side. Now for a few sparklers I've added a little tiny drop more liquid white
to a bit more of my titanium white and a few more bright peachy colors. I add a few little
sparklers here and there just to make my trees really pop. Don't overdo it though remember my
mantra save the dark it's your very best friend. So here's my finished painting but is it? I think
there's a bit of a blank area here. I want some of that color on the snow and there's also a bit
of a gap through here. I need something else for some interest. So let's tease in a little bit of
that peachy color onto my snow and I'll add in another layer of trees. This gives a little bit
more interest to that mid-ground area. I make changes to my painting as I go. I sit back with
a cup of tea or a cold drink and I have a good look at my painting before I call it really finished.
So one of the tips and tricks for painting mountains or in fact any painting is to live
with your painting for a day or so. I quite often come back after it's sat overnight and
have another good look before making any changes. I think I make better decisions once I've had a
rest from it. Your eyes can get very tired of staring at the same piece of canvas or in this
case paper for hours and hours and hours. You almost get blinded by it. So top tip take your time
and let your painting grow on you. If you've never heard of them there are things called
painting fairies. They come out when you're not looking and repair things on your painting which
you thought you were unhappy with. Strangely enough by the following day things that really
bothered you are magically repaired and I bet the fairies will visit your paintings too.
Final touches. Let's do a neat little trick by adding some little grasses and details to my
painting. I'm going to grab the base of these little grasses just the very very tip and pull
it back to create a little shadow across the snow. I absolutely adore this little tip and trick
to adding realism to your painting. Putting a little bit of color on the base of something like
a twig or a stick or a bush really gives your painting some smashing detail. So that's the last
of my top tips and tricks for painting mountains and if you enjoyed watching this being painted
then don't move there's another lovely mountain painting coming right along. Happy painting people!
