BATERIA DE 300KM DE AUTONOMIA CASEIRA - COMO ADAPTAR A BATERIA DE UM VOLVO XC40 NA VOLTZ EV1 SPORT

Two-Wheeler Technology
5 followers
3 Video Views·Nov 3, 2025
BATERIA DE 300KM DE AUTONOMIA CASEIRA - COMO ADAPTAR A BATERIA DE UM VOLVO XC40 NA VOLTZ EV1 SPORT
So guys, in today's video I'm going to tell you how the adaptation of a battery of a Volvo XC40 was made, which is a 100% electric car.
For those who don't know, a few months ago I made a video here on the channel, taking the battery from a auction, disassembling it together with Danilo and reassembling it in the solar system.
However, some packs of this battery were left over, and we tried to do some projects, including putting it in an electric motorcycle.
So in today's video I'm going to show you how to make this adaptation, how the motorcycle will look, how it will behave and how much I spent. So stay with the video.
So guys, in today's video I'm going to show you how you can make a modification to fit a battery here in a Volvo XC40 of almost 300km of range.
In fact, I think it gets to about 300km of range, if you put it in an electric motorcycle, you will notice it, it will be very strong.
This is a motorcycle that I already made the project, I already put the Volvo XC40 battery, each pack of Volvo you pay about R$ 2,000 on the internet, so with less than R$ 10,000 you can make a battery of 300km of range.
And the motorcycle looks great, this one already has the battery installed, as you can see down here, the battery is here in the soil, it doesn't stay very close to the ground, it gets very hot, so it's cool for the lumbar.
And the motorcycle doesn't change anything on the outside, there were only a few details here, we had to put a TPU glue to get water in here, but it was cool.
We will adapt these 4 modules here, they are battery modules of the electric car XC40, the car comes with 27 modules of this one inside it, each module you think is interesting to buy, for about R$ 2,000 to R$ 2,500 each module.
That is, you put together 4 car modules and you get a range of almost 300km on an electric motorcycle.
And that's what I'm going to teach you here in the video today, how do we adapt these modules to an electric motorcycle.
Each module in this one has 12 cells inside it, forming a 4S3P connection, that is, inside each battery here there are 4S.
For us to be able to put on an electric motorcycle, most electric motorcycles today are from 60V, and 60V is 16S.
So this one has 4, so theoretically we would need 4 times that for us to get 60V.
That is, if we connect this battery in series with this one, here we have 4S, now there will be 8, now there will be 12, and now there will be 16.
So we connect them all in series and we get 16S, which we need to make an electric motorcycle start working.
And in these cables here, the one that comes in it, this plug here, two temperature sensors come out, which are these wires here.
And the others here are S wires in here, so we can adapt this battery to an ABMS.
In the video here we will use an ABMS JK of 200A nominal, you see? 200A, 2A of balance.
And it will be very cool in the video here.
Guys, a very important tip for you is the following, never shorten any of these wires here, ok?
You have to be very careful when you put these wires here, why?
Because here inside the battery, it is a battery that we can say is armored.
You can't open it that easy, you can only open it by breaking it.
You have to come with a machete and cut it here, look.
You can open this battery to get to the cells.
However, these batteries here, they are connected through a flat cable in the connector down there, which is the connector that we will connect the series.
And this connector down here, as it is connected by a flat cable, if you shorten it, you will destroy the flat cable that was in here.
So if you shorten it once, that's it, you can't use this connector anymore.
Then you're screwed, what would you have to do?
Destroy it here, you'll have to open the whole battery to re-solder it in there.
So avoid it as much as possible, be very careful not to shorten this connector here.
If you shorten this connector, you'll have to open the battery.
Here, look, I turned on the multimeter here, negative.
The other tip of it, we're going to do some tests here, so we can see the losses in here.
This black wire here, ah, and no battery has a wire pattern, ok?
You have to tension wire by wire.
For example, this battery here, the colors of the temperature sensor are these.
These here are already other colors, you see?
So no battery here has a wire color pattern.
All batteries will have to be disassembled and wired.
Wire that does not give energy is the temperature sensor.
Wire that gives some continuity with the battery is the serial wire.
Here it is connected, look, the multimeter, it is connected negative here.
I'm going to turn on the other tip here, in black.
Look, it beeped.
So here it is also negative, just like up here.
Now let's see another wire here, look.
This other wire, let's see the little green wire here.
This little green wire here, look, it's the first one, you see?
It's 3.9 volts.
The second, if I'm not mistaken, I think it's this brown one here, look.
Now this is the second, you see?
And we're going to have to do this with all the Ss that are in here.
The total will be four wires.
One is the continuity with the negative.
And the other four will continue with the Ss that are in here.
So guys, I made the connection here of the Ss, look, which I didn't comment on in the video.
I separated here what each wire was, there was one here, but we're going to organize everything cute.
And now we're going to do the following, we're going to turn on the batteries in series.
In the C40 flight, it comes with this little stick here, you see?
This little one, this orange one, that you can connect two batteries in series like this, look.
We're going to make their connection here in this case, and this one we're going to solder inside the plane there, look.
So the motorcycle will have much more autonomy.
And inside this case, there will be two batteries used there and two more used here.
To make their serial connection, we're going to use a wire that's from Avion Sport.
Here, look, it's the ABCU wire from Avion Sport, it's very thick, you see?
And his oil comes in here.
So we'll be able to get a lot of power from it.
So guys, everything is connected here.
We already have the battery out of the pack, out of the motorcycle.
Then we got here, look, the batteries are all in series too.
This one is connected to this one, which is connected through the wire here, which is connected to this one.
Now we're going to see the S's, look.
I turned on the negative of the multimeter.
So in the first negative of the first battery, down here, we're going to see.
It has to have continuity, look.
So the first negative is right.
Now, all values have to be always increasing.
The value that will appear here cannot be decreasing.
Because it is the value of each cell.
So it has to increase between 3 and 4 volts, you know?
Here, the first series.
3.9
7.7
11
15
19
24
28
32
36
40
44
48
51
55
Now there's another connector here too.
58
62
And the last S, which is 62 too.
So now we can turn on all the batteries in series.
Everything is connected here to go ready to use the BMS.
And let's go!
Hey guys, I turned on the load balancer here, look.
For us to see how the battery is before we turn on the BMS.
We can see all the S's here, see?
The internal resistance, look.
All are good.
So everything is cool.
Voltage difference.
Voltage now at maximum on the foot here.
The average voltage.
And here it's doing 1A balancing.
This load balancer can handle 2A.
Only I don't know if the battery inside can handle 2A.
Because it's a cable flash, right?
The cable flash passes very little amperage.
In the original Volvo C40 car, I think it's 0.3A that passes.
And we're almost passing almost 2A.
So I don't know if it could handle any problem, right?
But, look.
From pack 1.
From series 1, 2, 3 and 4 was the first pack.
5, 6, 7, 8 is the second.
9, 10, 11 and 12 is the third here.
And 13, 14, 15, 16 is the last one here.
Through these data we can see that the most full pack is the pack number 2, which is this one.
And the most empty pack is the last one, which is number 3.
But with the balancer and with the BMS, it will balance and everyone will have the same load.
Just stay tuned here, look.
Soon it will balance and everyone will have the same load.
So guys, we turned on the batteries here now.
We organized the filter water here, right?
In that bird's nest, it was much more beautiful.
Here is the balancer, which we will change for the BMS soon.
And look, it was very tidy.
I didn't think it would be so tidy.
We put this thick wire up here.
I think it's a 20mm wire.
It's from BCU, from Avion Sport.
Why did I put this wire?
Because this lock here is hard.
This lock connects the two batteries in series.
It's a hard lock.
And this battery here will be standing.
One will be standing on top of the other here.
And these two will be standing on the other side.
So we can't bend this lock in the middle.
So we had to use a wire to be able to connect the two in series underneath.
Then our negative that goes to the motorcycle is this.
It will come out of the first battery.
And the positive is the positive of the last battery, right?
We will connect directly to the BMS counter, which is here.
We will connect directly to the BMS of JK.
And from the BMS we will connect directly to the motorcycle's computer.
So let's assemble.
Solder this pack inside the motorcycle chassis.
Make some adaptations.
And let's see if it will explode and catch fire.
Let's see what happens.
So guys, now we started to disassemble the motorcycle here.
We removed the computer.
Now we have to remove this solder that is down here.
To remove the solder, from what I'm seeing here,
you have to cut these three solders here.
There are three more solders on the other side.
There are three solders there.
Three solders here.
And there are some solders down here.
So you have to turn it around as if it were a handle.
And underneath there are three more solders.
We're going to break these three solders to try to remove this whole compartment.
And stick that metal thing in there.
This one.
Stick it in here to cover the batteries in the electric valve.
Look guys, now with the maquita,
we've been cutting the solder points here.
I've already removed a little bit.
I've been cutting the solder parts of the compartment here.
Now there are the last three solders down there.
Let's get them out of here, let's see how it looks.
And let's go.
A loose hair, huh?
Cutting the maquita with a loose hair.
Catch fire there now.
I'm going to cut it here.
If I cut the third one out, the motor wire would be stuck here.
Oh my God, look at the danger.
I think I cut it out wrong.
Let's try again.
Let's see if it comes out.
It's easy, huh?
Do you want something underneath?
Or does it have to be above?
It's just a little smell of solder.
It moved well.
Let's go.
One more cut.
Now this meat comes out.
Damn, this solder is good.
A little bit of solder.
I was going to break the motor wires, but it didn't happen.
The motor is all in the solder.
Damn, look at this.
It was born.
Now you can play here on the street.
But we're not going to play because it's not mine.
I don't want to play.
Guys, now I'm doing the solder here, in this metal housing.
To avoid getting into the water, right?
I've already soldered a few things there.
There are still a few holes, there are a few more down here.
Solder everything here to avoid getting into the water.
I'm going to do the solder here, in the housing now.
Let's see how it will look.
I'll turn on the machine and I'll put it on.
You see, I made a solder pin here.
You can see it here now on the other side.
We can see the solder pins here too.
Now it was the following.
This one on the other side I haven't soldered yet.
It's on top of the chassis.
I'm going to go up here, let's see if it breaks.
Let's see if the solder is good.
It's hot for meat, I'm afraid it has a shoe.
One side is gone.
Look, I have 58 kg.
Soldered, so no solder.
Will the battery have more or less the same weight?
Yes.
Soldered well.
Wait, I'm going to jump.
Yes, go.
Take advantage of the fact that the solder is new.
I'm on top.
Guys, I made the solder points down there.
There was the mark, you see?
The material entering.
It's soldered, everything is very well fixed.
I'm just not going to go up, otherwise my shoe will melt.
It's hot as hell yet.
Now we're going to get the silicone, we're going to clean it here.
We're going to get the silicone, we're going to pass it on these sides here.
To avoid squeezing water from the outside in.
Then the batteries will be well closed in here.
And let's go, it's going to be that transparent hose that people usually use in aquariums.
We're going to pass it on these four edges here.
It's going to come down with the battery, it's all there.
These parts that come with the battery.
It's going to come down here and theoretically the bike would be ready.
Guys, we insulated here with silicone.
You can see it well.
Silicone goes right on the edges here so that water doesn't get in.
On all the edges.
We put a cloth here to remove the excess of iron powder that's in here.
And now it's going to come down with the batteries here.
Wait for the silicone to dry a little bit there.
Just so it can get a little hard.
And it's going to come down with the batteries here.
And look how cool, the way it stayed here is that we supported this new metal housing.
We put it on top of the iron that I already know is there.
On this side we cut everything there, as I already showed in the video.
But unlike other motorcycles that you see on YouTube.
It didn't have anything underneath, you see?
So it's going to come in with the Volvo batteries here, it's going to be great.
And the bike won't change anything underneath.
Not even underneath, look here.
Just like that.
See, it's a little bent because here it's supported by iron.
There's an iron there.
And this other one is welded.
It's too cool, bro.
So here it doesn't scratch and doesn't budge.
Guys, we have to find those batteries.
We already turned on the three here.
It's going to turn on the fourth battery, which would be the S4.
Here comes the negative down there.
From the first battery.
Here is the negative that goes to the capacitor.
Here comes the positive of everything.
Here is the battery number 4.
Here is the battery 1, 2, 4.
There are three left up here.
Then the battery number 3.
We're going to plug it into this pin.
Which is the negative on its positive.
And it stays here like this, the positive and the negative.
We're going to put the two together too.
We're going to put a wire here to connect the two.
It's going to be 196 amps and it's going to stay inside the bike here.
Look, it's all in space.
Let's see later if the channels are already closed right.
It's already connecting to the secondary coil here.
Let's go.
Guys, there's a mess here.
We've already turned on the BMS, you see?
It's all connected here, the Ss.
This is the cooler that's in the controller down there.
We're going to put it here in place.
The bike turned on normally.
62.5 volts, you see?
Everything works normally.
I'm going to take a break here.
The bike has 40 amps.
The generator is already here.
It's working very well.
It hasn't exploded yet.
So if it doesn't explode yet, it's working.
Here are the connections.
Here's the temperature sensor.
It's cool.
Now I'm going to ride the bike and do some tests on the street.
Guys, the bike is almost all closed.
We just need to put the seat here.
It's like this, here's the BMS.
The controller is with the cooler.
It's down there with the new C40 battery.
The 4 packs.
Bruno had to heat it up here with the thermal blower.
Because with the thermal blower we can open the fairing a little more.
Because it wasn't closing right because of the battery there.
And he puts a silicone here too.
To close it so you can still see a little bit of the battery in there.
And it even closed to avoid water from entering, you know?
And it's cool.
The bike outside didn't make much difference.
Everything works normally.
The battery.
Everything works normally.
Now we're going to close the bike here and let's test it.
Now with the seat all closed.
The bike all assembled.
We can do some tests on the street now.
Everything works normally.
The battery is with 60 volts.
I'm connected to the battery down here.
The bike is already on.
And let's go.
Mode 3.
Let's go.
So guys, the video is ending here.
If you liked the video, consider leaving your like.
If you didn't like the video, consider leaving your dislikes and tell me in the comments.
For more videos like this, subscribe to my channel.
And if you have any video ideas for me to do in the future,
you can leave it in the comments there,
that I take the best ideas to make the videos.
And as you could see in today's video,
I have an electric car battery and a motorcycle.
It's nothing in common.
It's a one-after business.
You just have to follow some basic rules there,
and that's basically it.
Thank you very much and see you in the next video.
Thanks!
