Conservation of a Romano-British Urn (Episode 4): Dismantling

Historic Conservation
284 followers
2 Video Views·Nov 3, 2025
The fourth episode in a weekly series that tracks the in-depth conservation work on a Romano-British cinerary urn.
Cinerary urns were designed to carry ashes, especially the ashes of cremated bodies.
Follow conservator, Dr Duygu Camurcuoglu as she conserves this beautiful glass object.
A week and a half passed since we placed the glass urn into a steel box with a jar full
of acetone to start dismantling the old joints. About four days I left the urn in the steel
environment to see actually the acetone would start softening the adhesive and the joints
would start moving. However nothing happened, no movement, nothing happened. So I decided to think
about other methods, you know, how can I actually fasten the process a little bit. First I decided
to use some cotton wool pieces, immerse them into acetone and I started applying them directly onto
the old joints to introduce the acetone kind of directly onto the adhesive. However unfortunately
it wasn't really effective. The aging of the old adhesive, the thickness, you can see here the
thickness of the glass itself and the tight joints on the edges made the whole process much harder
than I thought. Then I decided to place the glass urn into a vacuum chamber following the same
principle as creating a sealed environment with acetone. However after two days of trying this
method nothing happened. So again none of the old joints were moving. So I decided that I'm going to
start trying actually placing the whole object into an acetone bath and I left it overnight to see
this direct application of acetone inside the old joints, whether this would work or not.
And when I came the next morning something was happening but again you know the joints were still
quite tight. A colleague of mine suggested to me that hot water, just you know application of hot
water might also help. So I filled a large tray with hot water and I placed the object exactly in
the same position as it was in the acetone bath, the same side and about I think five seconds, five
to ten seconds, I realized that all the joints on that side came apart. Following that I continued
repeated the same method putting it into the hot water bath. So in about in an hour the whole jar
came apart. I did some documentation of course. Before actually I dismantled the jar I took
detailed photographs. So as you can see here as the fragments came apart I numbered them and each
fragment they have little kind of numbers on them. So when I start reconstructing I know which way
to build. And currently I'm still in stage of deciding because this is an archaeological glass
it is important to use an adhesive which will not be stronger than the glass itself
but will be strong enough for this sound and heavy object to travel around the world
and also be displayed safely.
