The oil and gas value chain is divided into two major segments: upstream for exploration and production, and downstream for refining and sales. In this video, we dive into the upstream process, from seismic surveys to drilling exploratory wells. Learn how companies use advanced techniques to identify potential oil and gas reservoirs and why, even with cutting-edge technology, the chances of success remain a risky bet.
▶️ Watch our other videos: • Utilities & Power Industry Overview - Intr...
Key Sections 0:05 - The two segments of the Oil and Gas Industry 0:29 - Upstream: The search of Oil and Gas Reserves 0:40 - The exploration phase 1:06 - Seismic Surveys of Basins 2:06 - What comes after exploration?
📚 This video serves as an excerpt from the Oil and Gas Industry Learning Primer, meticulously curated by the digital e-learning content provider, Primerli https://www.primerli.com/. The full module, comprising 10 bite-sized videos and quick quizzes, is tailored to empower professionals to grasp the industry intricacies in under an hour.
What industry do you want to learn about next? Let us know in the comments.
Enjoyed this video? Subscribe here: / @primerli
✅ Connect with us on LinkedIn: / primerli
The oil and gas value chain is broadly divided into two segments.
Upstream for the discovery and production of crude oil and natural gas
and downstream for refinement and sales of the end products.
Each is a big industry of its own. Due to the complexity of each segment,
most companies focus on one, though major oil and gas companies are fully
integrated across the value chain. Let's start with upstream. The world has
a surface area of 200 million square miles. How can oil companies know where
oil and gas reserves are? It starts with the exploration phase.
Explorations can be onshore or offshore and the objective here is not to find
oil or gas but to narrow down the search area by identifying potential reservoirs
that might host oil and gas. Have you ever seen someone selecting a
watermelon by tapping on it and listening for a hollow sound
to see how ripe it is? Oil and gas exploration process
is similar to that, just more expensive. A lot more expensive.
The exploratory process starts with seismic surveys of basins to scan below
the surface and identify potential reservoir targets.
Seismic surveys use sound waves akin to the watermelon tapping and listening
method to create images of subsurface rock layers.
The sound waves, generated by a loud bang like the detonation of dynamite in a
hole dug in the ground or from an air gun in the water, travel
through the earth and are partially reflected by each rock
boundary back to the surface. Geophones placed at the surface record
the reflections, which are then digitized and analyzed by
geophysicists to identify potential rock formations that could lead to oil and
gas accumulations. In addition to seismic surveys, companies
also conduct regional studies to see if there are discovered reserves in
neighboring countries with similar geographies.
This would increase the probability of discovering reserves in the basin
under exploration. Based on the results of seismic surveys and regional studies,
companies will decide to proceed to drilling exploratory wells,
which are typically five inches wide with a depth ranging from a few hundred
feet to 20,000 feet. Next, samples are collected from the
drilled wells and tested in attempts to confirm the presence of a
reservoir and its properties in terms of volume
and mobility, that is how easily the reservoir will flow.
Tests are used to create 3D models of the reservoir and to identify the depth
of different layers of gas, oil and water. This is an important step
because drilling to extract oil and gas is a delicate operation
and mistakes can be economically catastrophic.
Even with the most advanced tests and models, exploration
is always a risky bet. Companies can spend millions drilling to find an empty
well or wells that are not commercially
recoverable with existing technologies. With modern seismic survey technologies,
the chances of finding oil or gas is less than 20 percent.