I always want to hear your feedback so drop a comment down below ✅
you guys walk back to another one of
these a-level live streams So today
we're actually starting these statistics
so I know a few of you have been asking
for the statistics and mechanics so
we're going to start with the statistics
and move on to the mechanics a bit later
um but we're going to do it in like
really small chunks okay this is just so
you're able to kind of pick exactly what
you want to know what you want to go
over so this is at the moment it's just
going to be the histogram part of as
statistics so we'll go through these
questions and these are all the
questions from the exam papers and
everything
um and then we'll move on to the next
ones in the following lessons so the
partially completed histogram and the
partially completed table shows the
times taken to the nearest Second for a
group of people to complete a puzzle so
the key thing to remember about
histograms is
uh so a few things so first of all is
that the frequency density which I'm
just going to abbreviate to fret dense
is just the frequency
over something called the class width
and the class width
is just the upper and lower boundaries
of the class subtracted from each other
so one thing that you should definitely
know though is that if you look at these
boundaries they're not actually correct
right so if you look here this is
actually at 4.5 and 8.5 not at five and
eight and this is because there should
be no gaps between classes when you're
talking about histograms
so if we get started we need to
basically fill in the rest of this so
the first thing I'm actually going to do
is write down all of the actual class
widths okay so we're going to do is make
sure that there's
always overlap
in the classes themselves
help
now if you look there are no gaps
between the classes as intended and
again you can actually read these from
the graph
so
if we look here
the first thing you need to do in any
histogram
is you're going to work out the
frequency density and again that's just
going to be the frequency divided by the
class width so if I get the calculator
up
in this case it's going to be so for the
first kind of row it's going to be 2
over 4.5
minus 0.5 okay
which is just a half so we're going to
write it in terms of decimals though
because fractions don't particularly
help us
and we're going to keep going and keep
doing it the next one is going to be 12
divided by that's going to be 3 right
4
then it'd be 8 divided by 2 which is
also four this one we don't know we're
going to have to read it from the graph
and the last one is three divided by 5
which is
0.6 okay
so what we will need to work out is we
need to work out the frequency density
of this middle class here which is the
one that represents
um
10.5 to 15.5 so if we think about how we
can do that well we need to know what
this graph goes up in so if we look at
this bar here that's 4.5 to 8.5 that's
this one so this frequency density up
here
is four okay so now what we're going to
do is we're just going to count the
number of squares and we're going to
divide 4 by the number of squares in
order to get uh how much is in each so
we have one two three four five six
seven eight nine ten eleven twelve
thirteen fourteen fifteen so we do is we
take 4 divided by 50.
you should also be noted that um
generally speaking in exams they will
put like bigger squares so they'll kind
of group the squares together but in
this question they haven't so that is
for over 15
um
good oh hang on one second I made a
mistake here
that should be three so it's actually
going to be
three divided by 15.
which is one-fifth so each box goes up
in 0.2 so we can put 0.246812468
two and then two four six eight three
two four six eight and then four so that
gives us the actual
indentations there the kind of
increments that we have perfect
so now we can actually read off what the
frequency density is for 10.5 to 15.5
it's 2. so the frequency density is two
and we want to work out the frequency so
if we rearrange this frequency is just
equal to the frequency
density
multiplied by the class width so we're
going to take 2 and multiply it by 5. so
frequency there is indeed 10.
perfect okay now we need to actually
draw the rest of the the bars so I want
you I want to ask for your uh you know
consideration here I suck at drawing at
the best of times
and normally speaking there isn't going
to be any gaps between any of the bars
but in this one since we started 0.5
there will be a slight Gap because we're
going to be starting here but that's
okay for this one frequency density is
0.5 so that would be 2 4 and the Midway
up here so be something like this and go
all the way
touching the graph again you should
probably use a ruler for this but
um
let's just move swiftly on
um the next bar is 4.5 to 8.5 we've
already given that 8.5 to 10.5 which is
Middle bit here should get up to four so
let's go all the way up oh
is that one there and the last one's
15.5 to 20.5 so that'll be all the way
up to the end here and that should be
0.6 so 2 4 6.
like that and that is how you complete
the histogram for that one
so hopefully that's not too bad
hopefully that kind of makes a fair bit
of sense again histograms we have done
in GCSE so I'm hoping it's not too
tricky and again that's for part A
completing the table Part B completing
the histogram lastly part C it says one
of the participants is selected at
random estimate the probability of this
participant completed the puzzle in
under 10 seconds so 10 seconds is all of
this stuff here I'm going to draw a
dotted line
and it's
all of this stuff here all of these
probabilities so we can work this out we
already know what the frequency of this
first bar is it's two
into the second bar we know that it's
12. now we don't actually know what the
frequency of the third bar is because
keep in mind it's not the whole bar
right it's up to this dotted line okay
and if you look at it how much of the
bar do we have
well if we have a look
it should be from 8.5 to 10.5 but we're
only going up to 10. right
which means we're leaving out one
quarter of the value so as an estimate
and this is where the word estimate
comes in we're going to take three
quarters
of eight because we're only using three
quarters of the bar now this is an
estimate because in this grouped data we
don't actually know how it's distributed
the Assumption here is that it's
uniformly distributed so there's an even
number of nines ten nines and tens right
so maybe four nines and four tens that's
what we're assuming okay or in this case
it would be actually
um what would it be two eight point
fives two nines two nine point fives two
tens and two ten point fives you know
it'd be an even distribution like that
so we have to take three quarters of it
but again this is where the estimate
actually comes in now if we equate this
we get two plus twelve is fourteen
three quarters of eight would be six so
in total we have twenty so the
probability and again this is for part C
is going to be 20 the number we have
over the total and if we have a look at
the total
um it doesn't actually tell us so 2 plus
12 is 14 22 32 35.
which again would just be 4 7.
and that's it so again remember when
you're estimating probability you're
looking for the number that you want
over the total and again but in this
case the number that we want is actually
um part way through the bar so we have
to take that into consideration
question two is another kind of common
type of question that they like to give
you so they're giving you a variable X
doesn't matter what it is
measure to the nearest whole number
50 observations are given in the table
below once again if you look at the
class width to actually incorrect
so again a lot of the time they actually
give you correct uh class widths but
again there are some of you out there
that are going to come across questions
where they don't give you the correct
class width so you need to do is correct
them
by yourself
something like that histogram was drawn
in the bar representing the 9 to 13
class had a width of two centimeters and
a height of 2.7
find the width and height of the bar
representing 1420 Okay cool so we have
this bar
right and it's going to have a width of
two centimeters
and a height 2.7
what we can think about is if we had a
one-to-one scale right where one
frequency density was one centimeter
what would the bar look like so we're
going to have this bar over here
now the first thing we can do is
actually work out the class width this
is the 9 to 13 cluster here so 13.5
minus 8.5 gives us five so it's five
units
okay and the height well that's going to
be a frequency density thing right so if
you want we can work out the frequency
density down here uh 9 divided by 5 is
1.8
like that so what we can do is we can
have a look at what the scale is along
the x-axis and along the y-axis so to go
from five to two
all we do is we take two fifths which is
0.4
let's go from 1.8 to 2.7 all we do is
Times by 1.5 and again the best way to
work this out by the way just um in case
you're wondering is this 1.5 constant
all you do is you take the value on the
right divided by the value on the left
they're common by 0.9 if I divide both
by 0.9 I get 3 over 2 which is indeed
1.5 same thing here right I take 2
divided by five one-fifth is 0.2 so
two-fifths must be 0.4
okay so now I know this I can now do the
exact same thing for the 14 to 20 class
so we're going to say this is 9 to 13.
then for 4 to 20
.
what the height and width should be well
the width is if we're going from 14 to
20 which is this one here it's going to
be 7. right
what would the height be so we have 14
divided by 7 that'd be two
then all we're going to do is Times by
the exact same scale factors in order to
work out what the height and width would
be
to times that by 1.5
which gives me three centimeters
we're going to times this one by 0.4
it's a bit harder to do so let's do
seven times 0.4 on a calculator
2.8 actually that wasn't too difficult
was it
so the height would be three centimeters
and the width would be 2.8 centimeters
okay so again
it's a question that they like to ask
you quite a bit
and we're going to do another example
question on that right now
so again we have a variable y that
measures the nearest whole number so
again what we need to do is go through
and add the correct
class width or the boundaries
there we go okay
and once again we have a very similar
thing so the 10 to 19 class let's just
do this
and this question gives us a little bit
more practice on doing this so what it
should be
and then what it
is
a width of two and a half
there's a height of 2.6
so the width of the 10 to 19 class
should be 10.
and 13 divided by 10 is 1.3
let's go from here to here 2.6 divided
by 1.3 well I happen to know that that
would just be 2.
and here that's just going to be a
quarter so Times by 0.25
so keep going
so part a
I'm going to do the exact same thing the
20 to 24 class
so if you notice by the way is that if
you took the class width of Justice 19
to 10 it will just give you nine whereas
the actual class width is 10 because
again keep in mind you have to do the
the kind of filling in so you will get
the answer completely wrong if you don't
do that so it would be 100 careful of
that
so 24.5 minus 19.5 will give you five
[Music]
cool so 7 over 5 which is 1.4
and then again the real width and height
so I'd be that would be five over four
which is 1.25 centimeters
which again makes sense by the way
because ten five so it should be half as
wide probably didn't have to do all that
but that's fair enough and that should
be Times by two if I remember correctly
which could be
2.8
centimeters
Times by two perfect and for Part B
you're doing exactly the same but for
the 25 to 28 class so again
let's
class width is 28.5 minus 24.5 which is
four
and the height is going to be
five over four
nope sorry 15 over 4.
which would be half a seven and three
point five
and then once again do the exact same
thing
to work it out
excuse me
one I know stats is a bit of a pain I I
do do agree with that
but it is kind of necessary it gives you
a six of your overall grade comes from
this so
we just got to do it
and yeah so this is kind of just based
on histograms and it is just the same
thing over and over again in terms of
this there's not too much
going with this but again it's just one
part of air stat so I really want to
take this nice and slow uh just to make
sure that you're okay because again as
someone just said I hate stats so much
stats is very very difficult it's very
annoying there's lots of little tiny
details and little tiny things so I
think it makes sense for us to go
through it slowly rather than just me
slamming five topics together and trying
to get through it so this lesson will
definitely be less than an hour in fact
we only have one more question so we're
about 20 to 30 minutes
um but at least this way
we'll get through things carefully and
be a hundred percent
and
so again last time again finding the
height and width of these classes okay
um but this is pretty much all they can
ask you they can ask you to find Heights
and widths of classes based on
information they give you before
hardest stats would probably be um in my
opinion hypothesis testing
so using the binomial or normal
distribution for doing that
but hypothesis testing is considered the
hardest one at least in all the students
I've taught
so one thing to note is that with your
kind of stats exam you tend to have five
questions okay one question is always
hypothesis testing
one question is always on box plots
one question is always on
and so I think overall really
actually as stats is the hardest is
hypothesis testing A2
there's hypothesis testing but for
different um
distributions so it's slightly different
um it's a bit of closer but for as
definitely hypothesis testing binomial
distribution
100 but if you're talking about as in
what I'm talking about right now
um overall
your actual stats and mechanics exam
there's five questions one of them is
it's a hundred percent for your actual
final a level one is always hypothesis
testing
okay one is always box plots
Etc
the fifth question is a bit of a Oddball
they could put histograms and they could
put a few other things in there as well
it could be another hypothesis testing
so just keep that in mind
yeah
I think we've started off with a fairly
easy kind of
stats and we're going to go through a
few more bits
later regression can be kind of seen as
somewhat difficult interpolation and
standard deviation is pretty tricky
in some cases
other than that I don't think it's too
bad probability I think gets a bit
easier because obviously you have the
binomial distribution which you can just
use on your calculator
yes
it's four or five I can't remember but
they both have the same amount so that's
why I said a sixth of your paper stats
are six a sixth of your grade is stats
as six is mechanics and then you have
basically a third four well sorry half
four but a third for Pure one a third
for Pure two
so
and this list is paper one and paper two
it's a third
third and then you have your paper three
which is applied right
and you have stats
and mechanics
which are a sixth each
which adds up to a third right overall
actually you know what I can quickly
double check what I just said
um so what I'm saying is correct this is
I can't remember how many questions it
was off the top of my head I believe
yeah it's five
it's five
and that's always the same and and to be
honest if you even look at these applied
papers it's always the same type of
question right like you 100 you'll get
hypothesis testing
right so
if you wanted me to predict it
one you have hypothesis testing
next you're going to be using binomial
or normal distribution to work out
um