I always want to hear your feedback so drop a comment down below ✅
And welcome to another A-Level Physics video. So today we're doing
mechanics and specifically we're going to look at the constant acceleration
equations. So here are the four constant
acceleration equations. Technically you can get another one by
just rearranging for use in this formula down here, but these are
the ones that you should remember. Now some students kind of wonder how
can you memorize these. Honestly I won't bother memorizing them.
All I would do is I would just go through and make sure you understand all
of them and just practice as much as possible. The more you use them the more
you'll be able to remember them. If you do A-Level Maths
honestly I'd be surprised if you don't remember these.
But let's go through some key points. Now shockingly you can only use these
when acceleration is constant. Now you might think that that's
a bit obvious, right, you probably clicked off the video by now, but keep in mind
that a lot of the times in physics they will
ask you after you do a calculation, you know, why is it not accurate, why is there
only an estimate, why should the time be longer or the speed be lower or whatever.
It's always because the acceleration is not constant, okay, and then you have to
think of why. Has air resistance been taken into
account for example? These are some things that you can think about.
So what kind of situations can you expect? Well anything falling really,
because when anything falls then gravity is just equal to 9.81,
right, so your acceleration is just 9.81. Now again
sometimes they may include things like, to be honest with SUVAT equations you
don't have to worry about it, they'll give you the acceleration
if it's not 9.81 when you're dropping something. But some other
examples are accelerating uniformly, so if they ever say
something is accelerating uniformly that is the exact same as saying it's
accelerating constantly. So if any of that is implied or
used then you can use the SUVAT equations.
The other time they may say accelerating uniformly
is if you have a velocity time graph or even an acceleration time graph which
is flat, right, which is
so no gradient or a velocity time graph with a constant gradient.
So those are some of the things that you can do to include those.
Some other things you can think about is if something's in a vacuum chamber,
so that just means all of the air has been sucked out of it which means if
you're moving things around there's no air resistance so it's very very close
to having a uniform acceleration. So these are the kind of situations that
you would want to use these in, but again it is fairly obvious
and they'll either say it's dropping if something's falling and they'll say
ignore air resistance or if something's accelerating uniformly.
So let's go on to some questions. So I've got exam questions from various
different exam boards but keep in mind with SUVAT especially
it's basically the same in all of the exam boards, right, because
it's SUVAT. It's very common so you'll find a lot of overlap but I have got
a couple from each exam board. So here it says a vehicle that skids can leave a
mark on the road surface. This skid mark can be used to calculate the velocity
of the vehicle at the start of the skid. So they actually use this in like police
crime scenes and things like that to work out someone was speeding when
they crashed. At a test track a car of mass 1500 kilograms
was collided into the back of a stationary car of 1200 kilograms
so we have a part A here but you might notice there's no part B. The part B
actually has to do with momentum which is why I've taken it out but it will be
in the momentum video. The two cars skid along together so this
bit is actually kind of useless for us because it's actually in
part B. So skid marks of length 7.5 meters the
car decelerates at 5.6 meters per second squared
showing the velocity at the start of the skid was 9. Okay
so what I like to do is I like to write up the letters SUVAT, right,
so S-U-V-A-T and I like to label them. So S in this case is going to be 7.5
meters. U is exactly what we're working out so
I put a big fat question mark. Now here's where things get a bit
interesting. So do we know the final velocity? Well
it doesn't tell me except it says to a stop
which means it stops moving so it's at zero meters per second. So these are the
things you might have to think about. The initial velocity is zero. If
it says that it's released from rest or begins accelerating from rest, something
like that. The final velocity is zero if it stops.
Okay that might sound obvious now but again
can be a bit tricky. Now the car's decelerated at 5.6.
So if I imagine what's happening here we have two cars which I'm going to draw as
a box traveling this way. They're decelerating or they're
accelerating this way. So I'm going to take this way as
positive. Okay so their velocity is going to all be
positive but the acceleration is going to be
negative. So it's going to be minus 5.6 and I didn't leave enough room for the
time. Do we know the time? No and we don't actually need it but I'll
still leave a question mark. So the letters we have and that we
want are S, U, V and A. So the equation I'm going to be
using that has all four of those letters. So can't be this one, this one has T.
Can't be this one, it has T. Can't be this one, it has T.
Now if you notice V is zero so I'm just going to
make that zero. So if I rearrange for U I get U is equal to
negative of the square root of negative 2AS.
Now again here's where some students might say oh there's a negative panic
panic panic but remember acceleration is negative okay. So as long
as you stay consistent with your signs I promise you the equations will always
work out 100% of the time. So don't worry about
it just make sure that you stick to it. So draw a little diagram,
draw which direction is positive and just stick to it. Any arrows going in the
opposite direction to your positive arrow are negative, any
going with it are positive. So we have square root negative 2
minus 5.6 times 7.5. Then all we need to do is use our
calculator which is over here. So we have square root
minus 2 minus 5.6. Again using brackets for
everything just in case some weird stuff happens with the signs
and we get 9.17 which is approximately 9. Not too bad right? Three marks
not too tricky in my opinion but again it takes practice to get
good at it. Now we've got one from AQA. So figure 3 shows a golf ball at rest on
The golfer hits the ball so that it moves horizontally with initial velocity
of 1.8 so that's our u. Deceleration of 1.2 as it travels to
the hole. So what we can do here is we can even
annotate the diagram they gave us right so u is equal to 1.8.
I'm going to take this way as positive. My acceleration which I use a double
headed arrow for is 1.2 and that's it. So this calculates the
velocity of the ball when it reaches the edge of the hole.
We also have the s which is already given to us that's why I didn't label it.
Okay so we have s is 1.3. We have u equals 1.8.
v is what I'm looking for right the final velocity.
Acceleration is negative 1.2 because it's going in the wrong direction
and time we don't care and we don't know either.
So again we're looking we have su v and a
and it's the exact same equation as the last question which is pretty handy.
We have v squared equals u squared plus 2as so v is just equal to the square
root of 1.8 squared plus
2 1.3 minus 1.2. Perfect.
So we have a calculator that's what we need.
Square root we have again 1.8 squared plus 2 1.3
negative 1.2 we get 0.35 meters per second to two
significant figures.
And the reason why I chose two significant figures so another thing
that kind of comes up a lot in physics is you have to determine how many
significant figures or decimal places you give an answer to.
If you look at your question you find the lowest number of significant
figures and you copy that. So in this case we have two significant
figures two significant figures so our answer should be to two significant
figures. If the acceleration was to three
significant figures we'd still pick two right.
If it was to three significant figures but both of them don't pick three.
Just whatever the lowest number of significant figures is.
Here's an OCR question it's actually a multiple choice. So we have a ball of
diameter 2.5 centimeters is held above the ground.
The bottom of the ball is 10.2 centimeters above the ground. The ball is
released from rest so initial velocity is zero.
Air resistance is negligible which means the acceleration is a constant 9.81.
What is the time taken for the ball to reach the ground? Now you don't have to
draw a diagram for this one but I'm going to because
it just makes sense to. I'm going to draw quite a big ball
and then I'm going to draw the ground down here. Now from
here to the ground that's a wonderful drawing 10.2 centimeters but
here's the thing about displacement right it goes from the center of mass
right so it goes from the center of the
ball. So all we need to do is add on the 2.5
centimeters onto that it goes from the
the whole width of the ball. So the ball is released from rest what is
the time taken for it to hit the ground? Okay I'm going to take
downwards as positive because there's literally no reason not to everything is
downwards and that's going to be our crisp 9.81.
So if we half that so anyways let's say s
equals 12.7 centimeters which is 0.127
meters, u is 0, b is don't know, a is 9.81,
time is don't know. So we're going to be using so we have
s u a t so if again if we go to the beginning
s u a t but it can't be this one can't be this one and it can be this one so s
equals u t plus half a t squared
and we're rearranging for time and again this is going to be zero
perfect so I'm going to give you a second just to have a think
about this question and if anything is incorrect so
and just to
so if you notice here the diameter of the ball is 2.5
but we're looking for the radius right we want to get to the middle
okay so that's one thing here so the reason why I did it that way
is because if you sub in 0.127 you actually get
a correct answer you'll get d right well I say a correct answer you get an
answer on here that doesn't necessarily mean you're
right so I'm trying to teach you a lesson here
if you sub in 2.5 you will get the answer d
but that doesn't mean you're right because again we're looking for the
radius which is 1.25
okay so that's what you need to do instead
so with multiple choice questions you need to be so extremely careful
because they will intentionally screw you over with this okay
they they basically know all of the common mistakes and they work out all of
the wrong answers so instead of 0.127 which will get you
the wrong answer you're going to put in 0.1145
which is just 10.2 plus 1.25 instead and that is going to be divided by
9.81 and that will give you an answer of 0.152
which is c and that is the correct answer
so again just a slight trick to to see if you guys were paying attention
very easy for you to do the right thing which is to include
this number somehow but do that in a wrong way
okay perfect so 2017 so a motorist receives a speeding
penalty notice from the police for a short journey
along 120 meters off road the car specification states that the
minimum time for the car to accelerate from 0 to 60 miles per hour is nine and
a half seconds showing the maximum value for the average
acceleration over nine and a half seconds is about
three meters per second squared so this is another thing they like to do
is unit conversions they tell us that one mile is 1600
meters so if you think here 0 to 60 miles per hour okay cool so with
s we're going to say that that is we don't know right because we don't
actually know how long it's going to be accelerating in terms of
distance zero u is zero because it says from naught
to 60 you don't need to convert zero into meters
bear in mind that with a level physics there are
some units that when you convert even a zero degree
zero size they convert to something else so for example zero degrees
celsius is not zero degrees fahrenheit likewise
you also have what was the other one there are some others that you that
don't actually translate straight straight away like that so just be
really really careful with that b is so actually zero degrees to zero
kelvin to kelvin right is also not um one to one now the 60 miles per hour
we need to convert that so we take the 60 miles we times it by
1600 and we divide it by 60 squared
so why did i get these values well this is miles
to meters right if one mile is 1600 meters
then 60 miles should be a 60 times that right so one to 1600
and then we're looking at 60 so we times both sides by
60 now it says per hour i want per second so to convert from hours to
seconds we times by 60 to get minutes then times by 60 again
to get seconds now why are we dividing it well there's two ways i like to think
about it one is when we have miles per hour we
have miles over hour so if i'm converting this to
seconds i'm timesing the bottom by 60 squared
so that becomes the bottom of my fraction and likewise with miles
to times the meters we're timesing by 1600
right so the top gets timesed that's that's one way to think of it
completely in fact this is the mathematical way to think of it
the other way to think of it is i think if i'm doing 60 miles in an
hour i should be doing fewer miles in a second right
right it takes me i'll travel less distance in a smaller amount of time
obviously so that's also another way to think of it just to double check
once you do this you can be fancy if you want and just do 1600 over 60 but
you know you don't have to 60 times 1600 over 60 squared
gives me 26.7 meters per second i'm going to call it
the acceleration is exactly what i want to actually
the acceleration is what i want to work out
and the time is over nine and a half seconds so time is 9.5
right so what are the values we have we have u
we have b we have we want a and we have t so this one is going to be
the top the second one here b equals u plus at
so again what i'd advise you do is that when you do these kinds of questions for
yourself write down all of the suvat equations on
a piece of paper just have it in front of you
and then as you keep looking you'll kind of work out what you need to
what you need to use so v equals u plus at
we want a so i'm going to write a equals b minus u t
so that's just 26.7 0 over 9.5 so on my calculator i'm actually going
to keep the exact value you get 2.81
which of course is approximately three pieces
cool not too bad part b says the police recorded
a maximum speed of for the car of 20 meters per second
the motorist knows that the speed at the start and at the end of the 120 meter
journey was zero so we're going to assume that this bit
here by the way is just designed to confuse which i kind of hate
assume it has constant positive acceleration equal to the value in part
a for the first 60 meters and then the same
deceleration so decide whether or not motorists should challenge
these penalty notice so if you'd like you can actually look at this as a
velocity time graph right now the key thing to remember here is
for this value here the first 60 meters in the last 60 meters
it means that the exact same amount of time
has elapsed for the acceleration to take place
as well as the deceleration both sides of this graph
are going to be symmetrical they're going to be the same right because if
you accelerate in with if you have constant
acceleration you accelerate for 10 seconds
or 10 meters and then decelerate for 10 meters you'll have the same
acceleration you'll have the same distance and you
so what we can do is actually half the distance
so what we could do is say that s is equal to 60
because if we just look at the acceleration bit the highest value
is right after he's accelerated okay that's the highest value
for v we call it v max if you want so all we're going to do is work out
what that peak velocity was so when he traveled 60
meters his initial velocity was zero because he starts from rest his final
velocity is what we want to know acceleration was 2.81
by the way the reason why they like to say show that questions
is so you have error carried forward so let's say i can do part a i didn't have
to do it i can now do part b by assuming three
meters per second squared and you will get full marks right so my
answer was 2.81 right let's write that down before i
forget if i work this out with the answer of
2.81 i'll get a certain number if i work it out with three i'll get a
different number but they are both correct with regards
to the mark scheme okay so just to reiterate if you get stuck
on part a and you can't do it and it says part b using the value from
part a just use this value and you will get
full marks for part b assuming you got the right answer for
part b okay so no matter what always try the
further parts because you can gain some extra marks you can gain all of the
marks right if you're part a wrong you can do part b c d and e okay
because there's there's something called error carried forward okay
and yeah we're determining whether or not he actually exceeded 20 meters per
second so uh the time we don't know and i i don't
particularly care about it so we have s u v a i'm wondering if you remember
this one already it's going to be v squared equals u squared
plus 2as well done if you remembered that but again don't worry if you
haven't this will come with practice i don't know why i drew the square root
that big
to 2.81
and let's do it square root we have two 2.81
60 let's see if he was speeding 18.4 meters per second
so should he challenge it well he wasn't speeding he wasn't exceeding 20
so he should challenge it and almost as if
as if i uh it's almost as if i scripted the video explain why the assumptions
about the acceleration part b may not be correct okay so
this is really interesting because they haven't said
why is this answer not necessarily correct in which case you'll just say
the standard i want you to memorize this acceleration not constant
that's it however they've added a bit more detail
explain why the assumption isn't true okay so here it is
two marks acceleration not constant and remember you can always bullet point
your answers when it comes to physics okay so
there's something like um quality of written communication
bullet points is fine quality of written communication only
refers to whether or not your answer is in logical
order and you've used the words correctly
right you haven't contradicted yourself it doesn't actually refer to bullet
points bullet point everything because now i can see oh look one mark
second bullet point oh look second mark easy peasy right i can see
exactly how many marks i should get so the question is why could it not be
constant well okay he's on a road right and he's
speeding up now that means his air resistance is
going to increase because he's hitting those air particles harder and harder
right acceleration would decrease so excel would decrease as he speeds up
or as velocity increases if you want to be really technical
because air resistance increases and again if you've
i mean maybe you drive or maybe your parents drive or whatever you've been in
a car when you're on a motorway for example
going from 0 to 40 is very quick but then beyond that it gets slower and
slower and slower why is that it takes the same amount of energy to
accelerate but the problem is is your is the air resistance is getting
bigger and bigger and bigger which means you have to put into more energy to
overcome that so that is all we have for today so we
have a good selection of suvat questions again if you do have any questions feel
free to put them in the comment section or you can email
them into me and i can make a video out of it
um just going through the whole thing but that is all we have for these suvat
questions for today