In the town of Montehermoso (Cáceres), the Rivera family keeps one of the most resonant artisan trades in history alive: bell foundry. The manufacture of a bell is a laborious process that requires patience, finesse and knowledge of the trade. In the year 2000, in the Rivera workshops, we were able to collect the entire process of manufacturing a bell.
If you liked this documentary, you can show your SUPPORT and HELP for the channel to continue growing with the "Thank you" and "Channel Member" buttons that appear under each video.
You can also learn more about my life, work and career in this biographical documentary: • EUGENIO MONESMA. 40 años de vida, trayecto...
Follow me on my SOCIAL NETWORKS: -FACEBOOK: / eugeniodocumentales -INSTAGRAM: / eugeniomonesma -TIKTOK: / eugenio_documentales -TWITTER: / eugeniomonesma
In the Cacereña town of Montehermoso, bathed by the waters of the Alagón River, the Rivera family
keeps alive one of the most sonorous artisan crafts in history, the bell ringer.
The manufacture of a bell is a laborious process that requires patience, delicacy and knowledge
of the trade.
To carry out the work, the ringer mounts the terraja, a vertical, removable and rotating axis
that holds an iron template.
It has the reverse shape of the bell and some support points inside the mold
and an outer beam.
The bell ringer raises a pedestal or pedestal of refractory bricks, whose circumference
will correspond to the lower ring of the bell, which marks the turn of the terraja.
The construction begins with the formation of the mold, which consists of three phases, the
woman, the false bell and that part with which the process begins.
The mud is a fundamental component in this part of the process of elaboration.
It has to be special, consistent, that it does not crack.
In addition to using it as clay, the bell ringers use it to cover and give solidity
to the different layers that make up the bell.
Fill that, you see, it has to be rough, it has to be fine, fill in all the parts.
The fire is another element that accompanies the molding of the male.
In the heat of the fire inside the cauldron, the mud mixed with straw must curdle
and gain consistency as the bell ringer adds layers and layers.
Finishing the male is called this slow and delicate process of hastening to the extreme
the quality and condition of the mud.
Once this first piece is finished, the euterio changes the template of the terraja and is
ready to start the second of the parts of the bell molding.
Before starting the molding of the false bell, the craftsman bathes the male with a brush,
applying a separator that prevents adhesion between both parts of the mold.
For this same purpose, a soapy varnish was formerly applied mixed with charcoal or a
thin layer of ash.
Some small pieces of brick are the base and support of the clay layer that starts
the molding of the false bell.
The procedure in all molds is similar to the one developed above.
Given its characteristics, the female is the only mold that will receive a special treatment
with wire.
The initial clay, which has dried after twelve hours of rest, is applied in repeated layers,
always hot, until it reaches the desired degree of refinement and the molds are ready
for burying.
The casting pit is the hole in which the molds are placed to receive the melted bronze.
The system of gears and pulleys facilitates the transport of the bells and their arrangement
in the pit.
Once the molds are located, the euterio levels the bases and fills its interior with earth
to consolidate the heat resistance.
It is time to insert the rings that will allow the bells to be born and subsequently hold
the truncheons that hit them to make them sound.
Inside the pit, the bellmakers remove the female, the external mold that overlaps
the false bell, and leave it uncovered.
The euterio breaks the false clay bell with the mallet and the initial mold, the male,
is visible , which they have to clean of dirt until it is polished.
The bellmaker applies a layer of molding paint on the male, very resistant to
high temperatures, which dries with the heat of the blowtorch to eliminate any
remaining moisture in the mold.
Again the female reattaches on the male, so that there is a gap between the two.
This gap is the one that will be filled with bronze during the casting and will correspond to the
magnitude of the final bell.
Once all the molds of their respective false bells have been released, it is time to fill
the pit with earth until it is flush with the ground.
The earth has the mission of compacting the mud molds so that they do not crack when
receiving the calorific energy of the bronze.
That is why the bellmakers hit it with the sticks, compacting it expressly.
The channels and the drinks are a determining part of the set of the oven.
They are made up of refractory tiles, stones and bricks.
In them are the respirators, air outlets through a mud tube, whose holes
are covered to prevent dust or earth from being obstructed at all costs.
Its preparation is the preliminary step at the culminating moment of the melting of the bells.
Since the times when the bellmakers and tinerants built the ovens from village to village,
where they were in charge of the bells, much has evolved the metallurgy.
However, the lessons of the experience persist.
Metal flees from humidity.
That is why Gabriel heats the drinks on fire to balance the hot temperature of the bronze
with the environmental of the tile, and thus prevent it from exploding in contact.
In the past, gas furnaces were used, in which the heat was reflected from an independent
furnace to a square covered by a vault.
Today, the old furnace has been replaced by a gas furnace with a rocking sunshade
and an air propulsion system that propels the fuel into the furnace.
As the bell bronze is liquefied in the furnace, the bellmakers re-load more ingots
of this copper alloy with tin, which is characterized by its consistency and sonority.
From the moment the oven is turned on until it reaches the melting temperature, it takes
about four hours.
The oven reaches a temperature of 1,000 degrees when it is ready to melt the 2,100 kilos
of bronze that its capacity allows.
Gabriel uses the tester to take the temperature of the metal and know the state of the melting.
In the past, this check was done by eye.
When the bronze simulated a white mirror, it was ready to release it.
The channels and the drinks must be perfectly clean, without any trace of dirt,
since the final texture of the bell depends on this pulchritude.
Gabriel uses a pipe through which he blows to finish cleaning it with the brush.
The metal inlet hole is plugged with wooden wedges to guarantee the passageway
at the time of pouring the metal.
After the first contact with the drinker, the bellmakers remove the stick that obstructs
the conduct and the metal descends until it fills the molds of the bells buried
in the pit.
The gases that expel the metal are released by the ventilators to which a torch is attached.
The flames indicate that the filling of the molds is progressing normally and there is no danger
that the work will explode due to the gaseous pressure.
The bellmakers strive to cut the channels with stones to prevent the metal from curdling
into a single piece and even breaking them.
There are two procedures in casting.
This first, called direct melting, is executed with the bells close to the mouth of the oven,
from where the liquid bronze is poured directly into the channels.
For the next, those used with the most distant bells, they have to prepare the spoon
to empty.
Once the direct melting has been released, the oven returns to liquefy, in this case,
700 kilos of bronze for the nine bells that remain.
Almost two hours of waiting are used to decentralize the drinkers.
So that there is no dirt in the bell.
In the so-called spoon melting, a metal container with a handle, articulated by a
pulley system, receives the liquid bronze from the bellows.
All the work done so far could be reduced if the precision of the bellmakers
failed .
The coordination and full concentration of the artisans will depend on the result of these
moments of nervousness.
The bellmakers pour the alloy with the spoon to empty, in those drinkers
furthest from the oven.
Once the melting is finished, the tension of the environment relaxes and gives way to the stillness of
time that will elapse until the bronze cools and solidifies.
The metal has rested underground for twenty-four hours.
Despite the time that has elapsed, a high temperature is maintained in the pit, which forces
the molds to be handled carefully.
It is time to start unburying the bells.
The smallest ones are the first to be removed.
The large ones will have to rest longer, until the heat puts the final result
in danger .
Land and bronze have compacted.
The euterium breaks with the mass the metal stagnant in the channels, which will be used
as a load in the next batch.
By force of shovel, the bellmakers empty the pit again, unburying the bells.
The earth hums due to the concentrated heat, and it is convenient to moisten it in order to prevent
it from compacting into blocks.
Sudden temperature changes negatively affect the bronze of the bells.
That is why only small bells can be extracted, while the large ones are uncovered
to advance the cooling.
The hooks are the tools that, in addition to being used to remove the bells on the ground,
serve as support and transport with the pulley, when removing the pieces from the pit to the
floor of the workshop.
Among the two clay molds, the bronze bell has been formed, which must now be released
from its matrix.
Gabriel breaks the female with the mass of one of the small bells.
As the clay crumbles, the bellman rolls the wire that surrounds the mold, the reinforcement
that gives resistance to this outer layer.
The clay fulfilled its task, now it is the cleaning, the shine and, above all, the sound,
the purposes to be achieved with the bells.
The larger ones receive a similar treatment, only the tools vary and the time
required for the task.
The euterium, after breaking and disassembling the female with relative ease, uses the lever
in the task of breaking the male's clay, which, due to the accessibility conditions,
becomes somewhat more difficult.
Brushes, brushes, the dizzying turn of the grinder.
Little by little we are discovering the metallic shine of the bell, the shape of the handle
and the drawings of its ornamentation.
The moraise, semicircular and with an excellent resonance.
The Romanes, square and of serious tones.
Or the Esquilones, with their sharp sound and the traditional shape that we all recognize.
Bells, all of them, which transmitted in our towns joy and sadness,
the invocations, the warnings and the preventions.
An essential element in the towers of the churches, which has, in the workshop of the
Ribera de Montehermoso family, the guarantee of survival among us.