DFNDR Armor Level 3++ Body Armor Review & Test

Ballistic Lab
1 follower
Oct 26, 2025
This is a test and review of the DFNDR Armor level 3++ Body Armor. In this video I shoot the armor with .308 and 5.56 using several types of ammunition.
Hey everybody, how's it going? It's The Daily Shooter and I'm back out here in the Mojave
Desert to test out some more armor from Defender Armor. Now some of you might remember that not
too long ago I did a review of the Defender Armor Level 3+. I took the plate out here,
I shot it a bunch, and it was absolutely amazing. I mean it completely blew me away. But there was
a lot of people out there who were a little bit upset because it didn't stop green tip. Well,
I tried to explain in the video that when it comes to non-metal or non-metallic body armor,
green tip is one of those rounds that is difficult to stop. However, conversely,
on a metal body armor or steel body armor like AR-500 armor and those things, standard 55 grain
ball rounds are the rounds that will most likely penetrate that armor, whereas green tip won't
actually do as much. So there's kind of a give and take between the two. Now when it comes to
steel armor, I think getting shot by a standard 55 grain ball is probably more common than getting
shot by a green tip. So that's something to consider as well. Well, now I have something
that is even better. Defender Armor contacted me, they sent me out this plate to shoot for you guys,
and what we have here is a level 3++ plate that will not only stop standard 55 grain full metal
jackets, but it'll also stop green tip. And it is ridiculously light. So what we're gonna do
today is we're actually gonna shoot this with several different types of rounds. We're gonna
shoot it with .308, three different types of .308. We're gonna shoot it with three different types
of .556. We got some 77 grain, we got some green tip in standard 55 grain full metal jacket,
and we're gonna see how this stuff actually holds up. My hopes are very, very high. I think,
you know, Defender Armor makes some great stuff. Unlike the other one, which is kind of a woven
composite material, you know, kind of like a Kevlar type material, this one right here is a
ceramic plate. So they are different types of plates to stop different types of threats. Now,
one thing I want to make sure that I mention before I actually get started with my test,
there is no such actual rating as 3++ by the NIJ. NIJ is the National Institute of Justice,
and when they do their ratings, they give a level 3 rating or a level 4 rating and so on,
okay? They don't have a 3 plus or a 3++ rating. Basically, what this plate is is a level 3 rated
by the NIJ that has been independently tested by Defender Armor and outside agencies that have
determined that this will stop more than a standard level 3 plate as tested by the National
Institute of Justice again. So that's where you get level 3++, okay? That is something that's
independently tested by them. We're gonna actually verify it today because we're only gonna be
shooting at about maybe about 20 feet away, 25 feet away, and we're gonna be shooting some heavy
hitting rounds, 18-inch barrels, 20-inch barrel, 308. So this is what we're gonna be testing out
today. Let's go ahead and get started. Okay, so let's start by taking a look at the setup. Today,
I'm gonna be using a Ballistics Gel Torso. This Ballistics Gel Torso is extremely heavy and it'll
show whether or not we have any pass-throughs. What I'm gonna do is I'm going to use a plate
carrier that was donated by Rothko. This is one of their new plate carriers. I'm gonna put the plate
in that and then we're gonna put that on our Ballistics Gel Torso. So with the plate carrier
and the Ballistics Gel Torso, we're gonna get a little bit more realistic or real-world results
when it comes to testing instead of just having a plate maybe taped to a barrel or something like
that. The orange bucket that you see here is just simply for stability. I have it filled with some
rocks and it's gonna keep our Ballistics Gel Torso from falling over. Now, here are the rifles that
we're gonna be using for the day, excluding the one on the bottom, which is for a different test.
The rifle on the top is chambered in 5.56. It has an 18-inch barrel. The one in the middle is our
308 and it has a 20-inch barrel and that's what we're gonna be using today. Now, we have several
different types of 5.56 to choose from. We have our green tip right here. That's the one that
everybody wanted to see stopped in the previous video. We also have some 77-grain open-tip match
and some regular 5.56. Our 308, again, we have several different types to choose from. Softpoint,
the X-TAC is gonna be our 168-grain open-tip match and then our standard ball ammo. But we're gonna
start with the green tips because that's the one that everybody wanted to see stopped. So we're
gonna take our green tip shot. It's gonna be top left and then we'll go ahead and we'll take a look
at the results. Okay, so there was our green tip shot. It was just a little bit off to the right
of where I was actually aiming and you can see the impact right there. So we'll go ahead and we'll
pull the plate out and this is the one that everybody wanted to see stopped in my previous
Defender Armor Level 3 Plus plate. And you can see here we have our entry and it's a pretty clean
entry. You know, there's no massive spalling even like on some of the other plates that I've seen
out there ceramic-wise where you get big cracks and chunks of plate and stuff like that. It's a
pretty clean entry hole right there. But now you got the big question, did it actually go through?
So let's go ahead and flip this plate over. We'll take a look at it and no, it did not go through.
It completely stopped green tip and really left kind of a just an absolute minimal bulge on the
back. Okay, so now we know it'll stop green tip. But what about at only 25 feet or so stopping
147 grain ball 308? Now, not only am I gonna shoot it with the 308, but I'm actually gonna hit it on
the corner of the plate. When plates get tested by the NIJ, they're usually tested six shots kind of
towards the middle away from the edges. The edges are the hardest part for a plate to take. So I
shot it nice and close to the edge. That's where you're gonna have the highest likelihood of the
round actually going through. And let's go ahead and pull this thing out and see exactly what
happened. Now, I wasn't sure what to expect. To be honest with you, I thought shooting it that close
to the edge, there's a potential for it to go through. And I was very surprised that it did not
go through. It did do a lot more damage since you're shooting at the edge of the plate, which
is to be expected. That's what's going to happen with just about any plate when you shoot it closer
to the edge. And you can see our damage to the back of the plate right there. Everything's kind of
pushed around the materials moved, but we had zero penetration again 20 inch barrel 147 grain ball
308 add near the edge of the plate and still it didn't go through. I mean, it's just absolutely
impressive. Okay, now we'll kind of add to that just a little bit. We're going to take our heaviest
round of the 556 that I have. This is the 77 grain open tip match. This is a really hard hitting
round. And what we're going to do is we're going to shoot it on the same side of the plate that
that 308 just hit. So you know that that side of the plate is already compromised that 308 hit it
really hard. Now we're going to shoot it on the same side of the plate and see if we get penetration
with the 77 grain. Here's our shot just a few inches above our 308 left a pretty good mark
there. And sure enough, we have bulge but nothing went through. I mean, and that's that's the main
person purpose of this test. You don't want to see if there's any penetration, but even shooting on
a side that was already devastated by that 308 still no penetration. Okay, so now let's try and
weaken the plate a little bit more. Before I take my last 308 shot, we're going to shoot this
standard 55 grain 556 full metal jacket round. We're going to hit the plate again. And we'll see
if we get any penetration this time. I don't think we are I think you can shoot this stuff quite a
bit with the standard 55 grain full metal jacket round and it's not really going to do much to our
plate. I tried to put it close to the other round so that you know if it had a chance to go through
it might go through because it was close to the green tip around but you can see again it didn't
go through nothing happened. So now that we've struck the plate several times, we're going to
move up to the PMC X-TAC, which is our 160 grain match sierra match king bullet. It's moving pretty
quick. And everybody knows this is a pretty hard hitting round right here. It's kind of one of the
standard rounds people go to when you want accuracy and you know you want to hit your target pretty
hard. So let's go and take our shot. Now to be honest with you, I was actually kind of nervous
on this one due to the fact that the plate had already been struck so many times. And now at the
very end is when I was shooting that big 308 at it, especially the 168 grain, I put it right into
the spot that was already the most devastated right in the middle there to see if we could get a clean
pass through and still nothing no pass through. Obviously we have backplate deformation again to
be expected. But you have a 308 right below that you have a 77 grain open tip match 556 right above
that that's moving really fast. And then dead center I dropped a 168 grain 308 and it stopped
all of it. I mean this is extremely impressive armor. So it stopped the green tip it stopped
the standard 556 it stopped two different types of 308 you got the backface deformation yes but
you have zero penetration. This is absolutely amazing armor you know and it's definitely worth
checking out if you're somebody who is in law enforcement you're somebody who depends on armor
maybe on a daily basis or you just want a kit that you know is going to work to stop the threats
that you need it to stop. This is definitely some stuff you might want to check out. Again Defender
Armor makes some of the highest quality armor on the market and I've been impressed with it every
single time. So if you guys were watching the previous video and you wanted something that'll
stop green tip definitely check this out. I'll put a link to their website in the description box.
I really appreciate everybody watching this far please like subscribe and have a great day.
