I Made Top Golf For Baseball!

LeMaster Tech
183 followers
497 Video Views·Oct 25, 2025
This video was more about making childhood baseball dreams come true than anything else! What's the point of having the knowledge to make things if you never have fun with it!
The Fielder's Choice infinite pitch and catch machine was developed using an Arduino Opta PLC, some actuators and motors, and the Heater Pitching Machine!
Pitching Wheel: https://amzn.to/4oBmgif
Arduino Opta PLC: https://amzn.to/3LbYTxn
Thank you for watching and don't forget to leave a like on the video and subscribe to the channel!
Massive thank you to my Patreon members for making this project possible!!
My Patreon: https://www.patreon.com/LeMasterTech
I spent about 14 years of my life
playing baseball. And while I didn't
really have the skills to make it to the
big leagues, I still love getting
outside and playing catch or taking a
few swings at batting cages. But it's
still always different from really
playing the game I grew up loving. Now,
as an engineer and tech lover, I've
thought a lot about how to recreate some
of the most fun aspects of being in the
field or on a baseball diamond. And in
today's video, I'm going to show you how
I built this multiaxis rotating and
elevation changing automatic pitch,
catch, and return machine I'm calling
the Fielder's Choice. And it's basically
like Topgolf, but for baseball.
And this video was a ton of time and
effort. So, consider leaving a like on
it, subscribe to the channel. It helps
me out a ton and it'll show me that you
want to see more of this type of project
on the channel. So, I've had the idea to
build the Fielder's Choice for years,
but have really needed a good kickstart
to actually begin developing it.
Recently, I had the chance to meet with
some awesome folks from Arduino and talk
about their newer industrial line of
PLC's or programmable logic controllers
called the Arduino Opta. It's a super
affordable way for me to start teaching
folks about industrial automation and
controls, which is the field I work in
professionally. So, while I was working
on these technical tutorials on PLC
programming, HMI development, the
electrical wiring, things like that, I
decided I wanted to do one bigger, more
ambitious project that ties it all
together. And so, I decided this was
going to be the thing that kickstarted
me building the first revision of this
automatic pitch and catch machine called
the Fielder's Choice. And it actually
started pretty smoothly for development
because to cover the whole baseball
field and be able to alternate between
ground balls, liners, potentially even
highline drives or pop-ups, all you
really need is two axes of motion and a
basic pitching wheel. I bought a pretty
affordable but still decent quality
pitching machine at a local sporting
goods store. And I decided for the
initial revision of this project, I was
just going to retrofit the motion I
wanted onto this existing pitching
wheel. needs something that can change
the pitch or elevation of the pitching
machine. Pitch meaning elevation here,
not meaning the, you know, fast ball
slider curve. And since that's a linear
up and down movement, I decide to grab a
linear actuator. These are components
with a 12volt DC motor driving a gearbox
in the base that pushes a lead nut on a
ball screw down a linear axis. I had the
thought of replacing the back leg of the
pitching machine entirely with the
linear actuator, but at that angle, it
actually wouldn't get much elevation
change. By developing this sort of lever
system, I was able to simulate the
motion of me standing at this back leg
pivoting the system straight up and
down. And linear actuators are easy to
control because you can just change the
polarity of two wires to change the
direction the actuator moves in. And you
can just cut power to the wires
completely to get it to stop moving
altogether. So that means I can control
it from a PLC or a microcontroller with
just two wires off the actuator and a
couple of these electronic switching
components called relays. Next, for the
rotational axis, I had previously used a
rotary table for a different project,
but it was fresh in my mind as a good
option for taking a simple and cheap
stepper motor and getting a nice smooth
rotary motion of a larger component.
Basically, with just 3D printed gears, I
can mount this bigger rotary gear at the
top half of the pitching machine base
and fix this mounting enclosure to the
bottom half. And now, when I command the
stepper motor to turn in either
direction, I get a smooth rotation about
that center pole. Now, I don't actually
want this system to rotate a full 360°
because I'm designing it for a baseball
diamond. So, I really just need about
90° of that rotation. I had many of
these infrared proximity sensors on hand
already, so I mounted a few at those 90°
limits, and I added a little 3D printed
tab to the center of the rotary table so
it would trigger the proximity sensors
when it hits the motion limits. One
thing I had definitely been
intentionally putting off until I got
the basic movement axis figured out was
the catch and return mechanism. It's not
that hard of a concept to build
something that can catch a ball. Nets do
that all the time. but to catch the
ball, funnel it down through a system
that would wait at the top of the
pitching machine until a programmed
sequence told it it was time to release
the ball and then reset to catch the
next ball. That was a little bit more
daunting of a task. Got a batting
practice net from a sporting goods store
and just chucked balls into it for a
while while thinking about how it was
receiving the balls and how I might
return them. And it felt like the net
absorbs the momentum of the ball pretty
quickly and easily. So, if I elevate the
net and add a funnel or pipeline out of
the bottom of the net that is flexible
enough to feed into the top of the
pitching machine, I think we can make
this work. Now, the pitching machine is
actually pretty high off the ground. So,
I had to make the zone with the net and
the catching mechanism pretty high as
well. And that's actually a pretty
realistic target for if you were playing
catch with a friend or throwing to a
first baseman with decent reach. This
really only left one unknown, and that
was stopping the ball from dropping into
the pipe, but knowing the ball was there
and ready for release, and waiting for a
programmed signal to command it to
release. This was the one time in this
project I felt like I actually designed
and modeled something interesting, kind
of unique, and a little bit innovative,
and I was super excited that we pretty
much nailed it. I made a port for
mounting another proximity sensor to
detect whether or not a ball was there.
Then I sidemounted a pretty beefy servo
I have to to control a little hatch
mechanism. When it swings into the
middle of this box, a ball can't get
through, but it does break the proximity
sensor to tell it a ball is in place.
But then the servo swings clear and
drops the ball into the pitching machine
when it's time and returns to its
holding position after releasing the
ball. It has pillars and tabs so that it
sits on the existing pitching machine
easily with no special mounting
required. and it has a 4-in inlet, so
the flexible duct work can clamp right
around it. With this final piece of the
mechanical puzzle ready, I pivoted to
the electrical work. Now, I am a
professional automation and controls
engineer, so this part was actually a
little more in my wheelhouse, but this
project still brought with it some
pretty interesting challenges. Biggest
one was that I had several different
voltages involved in this project. The
pitching wheel itself required 120 volts
AC. The PLC and the microcontrollers
could be powered from 12 to 24volt DC,
but then my stepper motor controller and
my servo and my proximity sensors all
needed 5 volts DC. And getting all of
your voltages and signals right in an
electrical project is obviously the most
important thing. The servo and stepper
motors needed 5V DC pulse with
modulation, which is a type of signal
where you switch on and off voltages
very fast and very precisely to control
the movement. I opted for adding an
Arduino Nano to the mix that would
listen to a simple onoff command from
the PLC and do those 5V PWM signals to
the motors based on those inputs. I also
went out and grabbed a stack light so
that while you're in the field, you can
quickly see some statuses about the
machine. The wiring diagram shown here
might seem a little chaotic and the
control panel itself does have a lot
going on, but the project boils down to
just a few inputs and outputs. The
outputs in total are the red, green, and
yellow stack lights, an on and direction
command for the linear actuator, an on
and direction command for the rotary
axis, the command to the servo to
release the balls, and then the main
pitching wheel on and off command. And
similarly, the total inputs we're using
are just the two rotary axis limit
switches and the ball present limit
switch. from then making the system do
something fun is just a matter of
building a good program and interface
for it. To give this a more fun and
competitive and repeatable kind of game
feel similar to what Topgolf does for
golf, I also added an HMI or human
machine interface that can see what the
machine is currently doing and where a
player can start or stop the game or
change game modes and it tracks your
previous best times and scores. And I
decided I wanted to start with three
basic game modes, which I call catch,
around the horn, and field a position.
And catch is kind of self-explanatory.
It puts itself basically in a throwing a
line drive position. And you just
endlessly catch and throw the ball back.
And it's not complicated. It's not
moving at this point. It's basically
just a pitching machine with a catch and
return mechanism on it. And I was
already having so much fun. And then
around the horn was a little different.
And I was thinking you might want this
game mode if you wanted to get a little
bit of a workout in with this machine or
because you had a whole team out on the
infield. Basically, you can choose which
side to start on, first or third, and
then the machine will automatically go
through a sequence of liners and ground
balls all over the infield while you,
the player, make your way across the
infield getting a whole bunch of
different looks. And that's kind of
similar to the last game mode, which is
fielding a specific position. So you
just tell it what base you're playing at
and it'll go through a sequence of
liners and grounders more tightly
clustered to right at that position that
you're playing. So first, second, short,
or third, you could get a wide variety
of looks at that position. So, while I
was building this and every time I faced
a tricky challenge or setback, I would
question pretty hard why I decided to do
this at all, if it was even a good idea,
if I should maybe just pivot to a much
smaller project or finish my tutorial
series with something else. But as soon
as I got this on the baseball diamond
and started launching grounders and
liners all over the place, I felt a love
of this game that reminded me of every
awesome memory I had in all 15 years of
playing it. And there are so many
features that could still get added to
this. There are so many ways to make it
more robust or turned into a commercial
product. But dang it all, I am so proud
of what I did build here. And it was so
fun to make and it's so fun to use. And
my whole personal goal was get it built
and shared before the 2025 baseball
season came to a close. And here we are
about to start the World Series. All
right, you guys, that is going to do it
for today's video. Thank you so much for
watching. Consider leaving a like on the
video if you liked it. Subscribe to L
Master Tech. These projects are a ton of
time and effort, so consider checking
out my Patreon linked in the description
of this video. Thank you so much to all
my Patreon supporters for making this
project possible. Let me know in the
comments what you'd like to see next on
the channel. Thanks for watching and see
you next time. Bye.
