Wall Clock Movement Removal

Chrono Chronicles
8 followers
6 Video Views·Oct 23, 2025
Okay, this is going to be removing a movement from just about any clock really so first thing you're going to do is
Take off the face of the clock
Which I've already done, so I'm just going to open the lid
I'm just going to prop it up with something because I don't want the weight of the door
Pulling on these two hinges right here
Here is the face that I've already taken off
There's screws holding it in make sure you take off the hands first before you actually take off the
Face itself this one had two screws one there and one right there
That's all it took
So once you have your clock face off you're going to be left with
just
The movement really so there's going to be nothing else sticking out poking out
If you have a chiming clock you're gonna have your gong down there or
chime rods
This one does it used to have a chime in movement
Sorry, and it went right here, but it's not there anymore
So you need to
Find out what's holding in the movement here so at the bottom. I can already see
There's two screws one here one here and the same goes
At the top up here here, and I'm gonna show you that in just a second
All right, I couldn't get an exact view because you can see up here. That's a tiny gap
to fit a camera lens through
so
I'm gonna go ahead and remove these two down here
look like
Flathead so I'm gonna swap out a bit here or a
larger flathead
You know about this movement
Well, let me get closer to the mic
I'm not really sure if it's the like original entirely
There's been some parts moved around definitely swapped. I can tell it's been tampered with before
All right
Bigger bit on there, so let's see
works
Gonna be careful here
All right that came out pretty easy
Think I can get that with my hands now there we go
Here's the screw
Pretty small to hold in a movement
So that's one and there's a total of three screws for this one
There should be four but up here in the top. There is a missing one actually
So I will only be doing three today
There we go
Nice and easy
Okay, easy parts over
Now I've got to get this one up here on the top out
do these
These two little brackets stick out. I'm not sure if they're adjustable though
Okay
Little wobble, okay, so I'm gonna
Adjust some things so you guys can see better and I'll be right back
This is gonna be almost impossible to see
Right down there. I
Can't reach it
Properly this so I'm gonna have to go get a longer screwdriver
All right, I'm back
And now I'm taking out the final screw
Right down there I
Can't really see it too good myself. But there we go. Okay
Hold on
This one's gonna be tricky putting back in already
All right, I think it's on its way out now
All right. I think that was it. Let me just double-check
Grab the front plate
top and bottom
Okay, that that's pretty much it for removing a movement so if you have any questions or want to get a hold of me
Just leave a comment and I'll respond and thank you for watching
