Narrated glassblowing process, pulling cane and creating a vase

Art Creation
8 followers
Hey everybody, welcome back to the studio. So today we actually had some audio problems. I forgot to
turn my microphone on, so there's no audio to go with this. So we're not going to have the shop
sounds and things like that, but I thought I'd hang out with you and talk a little bit, probably
just monologue and talk a little bit through the piece like I normally do. So for this piece we're
going to be doing another cane pull first, so we can kind of show you how we pull those canes,
and then we'll do a roll up and make a small little base. So what I'm doing right now is
we're actually going to make something called veiled cane. I haven't done this before on the
channel, and it's something that's kind of new to me. It has a lot of different elements and
components that I'm still just kind of working on and trying to improve on, but essentially what
we're doing right now is we're going to go ahead and do a little bit of a color overlay. So the
color that's on top of my bubble right there is like a opaque green or a transparent green. I
can't remember which one, but basically we're going to put it on top of the bubble, and I'm
going to spread that color across, and what we're making right now is a small little cup. So this
cup is going to be probably about, you know, four inches wide and about six inches tall,
and I'm going to add a little bit of clear glass on top of that glass right now. We're going to
blow this thing up a little bit, make that small cup, and this is what's called a stuff cup. We
made one of these on the channel just a little while ago. I think it's actually the previous
video that's right before this one, but essentially what we do with this is we make a cup that's very
colorful. You can put patterns on it if you want. Today, like I said, this one's just going to be
green. So we're making this green cup, and then I'm going to take some solid glass, and I'm going
to stuff into it. In the video that we did before, we made a piece out of it. So I made a really
kind of like a really cool design with a bunch of different lines of cane and things like that.
I stuffed it with a bubble, and then we made a vessel out of it. This is a little bit different
where we're making components out of the stuff cup. So essentially when I stuff it, we're then
going to pull cane with that instead of using the bar color that we traditionally have done on the
channel. So we're going to get these big bands of color instead of a big long line of color. So
they call this veiled cane, like I said, and it just gives it kind of a different look.
So we've blown our cup up quite a bit, and now we need to get ready for our punty transfer. So my
brother has a rod in his hand with a little piece of glass on the tip. We're going to use that as
like a little piece of glue and attach it to the bottom of our cup. Then I'll be able to disconnect
it from this pipe, and we'll have it transferred and flipped over on the other pipe. What this does
is it exposes the bubble that we blew into it in the beginning, so there's a hole at the top of it.
So I can now use my tools to go inside of there and open it up to the final kind of diameter that
we want it to be at. Making these cups can be a little tricky sometimes. You know, they tend to
get a little big on you, and I'm still kind of figuring out exactly what size I should be making
them. And obviously that depends on what you're making in the end too. So whenever you're pulling
this veiled cane, you want to keep it as compressed as possible so that you get a really good color.
It's always difficult to gauge how much bar color, that little piece of bar that we picked up, that
I'll need to be able to get the correct colors in the end. No matter what you're doing, even if you're
just making a piece and stuff like that, it's always a little bit difficult to gauge. So we
finished making our cup, and now we're going to knock it off of the pipe. We'll put it in my
brother's Kevlar gloves, and he's going to safely transport it to our pickup oven, which we've
preheated to about a thousand degrees. So now we're going to prepare to stuff that with our clear glass.
So I'm going to gather about three times, get a decent amount of glass, and then we're going to
have a small amount of time to shape it up, and we'll be able to stuff it into the cup. So for
anyone who's new to the channel or doesn't already know, that furnace that I've been dipping my pipe
into houses all of our clear glass, exclusively the clear glass. It stays on 24-7 at about 2,000
degrees, and it houses about 700 pounds of glass whenever it's full. This furnace was built in 2020,
so it's been on for like the last five years. So I have all the glass that I need. I'm going to take
a few moments to kind of shape it up and make sure it's got the right kind of distributions.
It's in the right shape, and then here in a moment, I'm going to take a pretty big heat on it, and
we'll get ready to stuff the cup. I'm still new at stuffing these cups. You know, I've only tried
it once with a bubble, and I've only done this move maybe once or twice before, but it's always
hard to gauge how much clear glass you need to be able to fit into the cup that you've made.
So I filled this one up pretty well. It had probably about a half inch at the top. You can
kind of see that discoloration right there at the top, but that's fine for what we're doing today.
It's not a problem. So I'm going to really try to press down and distribute that clear glass that's
on the inside as well as I can, and then like I said, we're going to pull this into canes. So
if anyone's not familiar with cane pulling, you haven't seen it on our channel yet, it's a pretty
cool process. I'm basically going to make a small little cylinder right here, and in a moment, I'm
going to be able to stretch it as far as I want to. So we're basically making our materials to be
able to make the vase that's going to kind of give it its color and its design. So today the plan is
to do an opaque green and a transparent green, and like I said before, I think this is the transparent
green, but I'm queuing this up so that we can be able to attach it to a different rod, kind of
similar to that punty. My brother has that right there. So he's going to get that, which is called
a post, get that ready for me. He's going to let it cool down quite a bit, and then when my glass is
hot enough, I'll be able to stab it onto that post and we'll stretch it as far as we can.
Pulling cane is a very kind of simple idea. You know, we're taking the glass and we're trying to
stretch it as far as we can. Well, maybe not as far as we can, but it's always difficult to kind of
size up the diameter of the cane that you need in the end. Sometimes you want skinny canes, sometimes
you want thicker ones. So you stretch it a lot in the beginning, kind of set the diameter, and then
you can pull on the hot parts, which are on either side of the cane pull, while the middle is kind of
freezing up, and you can pick your diameter. So all of this happens in a moment. It's kind of difficult
to do in the beginning. It takes a lot of practice to be able to figure out exactly what you want to
do and be really precise about it, but I really enjoy pulling cane. It's one of my favorite
kind of ways to make patterns and things like that, and the more that I pull cane, the more
that I enjoy making the cane and using the cane in my work. So that's one of the pulls. We went
ahead and pulled it pretty far, and this is the second one. So we made another stuffed cup, we
stuffed it with glass, and we're going for it one more time. So I think that one, like I said, was
the transparent, and this one is the opaque green. So we're going to go ahead and give it another pull,
and then we'll be able to break this down, chop it up into smaller segments, and then we'll be
able to make our pattern. This pull went really well. I was trying to match it up to the diameter
of the other one, and it went pretty well. I remember it came out a little bit thicker than I
wanted it to be, but you can see the two different kinds of shades of green right there, which is
exactly what I was going for. And now we're going to break this down into small segments. I think
this is about six inches of cane. So we're going to chop up the transparent, we'll go ahead and
move on to the opaque and chop that one up too, and then in a moment we'll be able to lay them out
on this ceramic plate called a pastorelli plate. That's about, I don't know, maybe close to about
800 degrees, something like that. We've preheated this little ceramic plate right here, and I can
lay these things out, we can let them preheat a little bit, and the plan here in a moment is that
we're going to go ahead and start to heat them up in our glory hole, which is about a 2,000 degree
oven that we use to heat the glass up, and we're going to fuse them all together. The basic plan
is to make a small collar like I'm making right now, which is basically a ring of glass on the
tip of my blow pipe, and once all of those canes are fused together and they're the correct
temperature, I'll be able to use this collar to roll them up into a cylinder, and that will
basically establish my pattern. So my brother's taking good care of these canes, he's going to
flip the plate around back and forth, that's because in the reheating chamber the burner is
on one side and it overheats one side, so we have to flip the canes over and over every time we take
a heat on them, but he's going to make sure that they're nice and fused, they're the correct
temperature, and I can kind of communicate with him to make sure that it's the right temperature
whenever I go for the roll up. So I also have to make sure this is the right size, we have a small
pie divider that we use to make sure that this is the right circumference depending on the length
of the canes, so I make sure that my glass is just the right size, and then here in a moment after
we've fused them all together, I'm going to go over there with my pipe, we'll tap it onto the right
side, and do the roll up. One of the things that I think is really interesting about glass blowing
is that, you know, there's no going back, it's really difficult whenever you make mistakes to
recover from them, so you know, it's all about planning, it's all about how you kind of approach
the process, it's all about your preparation, and that can kind of be like a great thing and
a bad thing, you know, if you're unprepared then things don't go like you want, if you're prepared
then things really will, but the unexpected things kind of happen sometimes, you always kind of got
to roll with the punches. So this roll up went really well, I'm really happy with how that went,
and now I'm going to work on smoothing all of it out, because all these canes have all these ridges
on them, right, because they're all circular canes, so when they're pressed together it's not exactly
flat, they have all these ridges on them, so I'm going to work on minimizing those ridges so that
whenever I stick this back into the furnace, we don't pick up any bubbles. Now I'm doing what's
called a termination, so I'm getting rid of a small bit of glass on the tip, this is a little
bit more than I normally would get rid of, it's because we ended up making a piece with it a
little bit later in the day, so my brother is actually going to make another collar, and we're
going to attach this on, and we're going to separate it into two different pieces, so the part that's
attached to my blowpipe we'll make the piece out of today, and we made a separate piece later in
the day with the part that's attached to my brother's collar right here. So it's a good way of
cutting off the vessel, because now we've established a bubble on my side, and we can use the rest of
those canes to be able to make the piece that we made later. Glassblowing is all about efficiency
as well, you know, we basically will get the glass as hot as we can, or as hot as needed in the
reheating chamber, the glory hole, and then when you come out the glass is constantly cooling down, so
you only have a small amount of time to be able to manipulate it before it cools down, and you need
to get more energy, so it's basically energy management, temperature, timing, pressure, so you
know, it's all about your precision and your efficiency, which is another thing that I think
is really cool about glassblowing. So we smooth this thing out pretty well, and now here in a moment
we're going to go ahead and go for that gather. Gathering is the term that we use anytime that
we get glass out of the furnace, so I'm going to add another layer of glass on top of here, and from
here on out we're basically just glassblowing. We're going to turn this into the base, the final form.
So while we're starting to blow this thing up, I also just want to say, you know, I have a lot
of big plans for next year. I really want to start to build my own studio, that's something that's
been on my list for a long time, so I think that's going to be a big part of the channel too. I think
we're really going to gear up to start to try to build my own studio, and really see how much
content we can push out, try to do more and more and more. I love glassblowing on the channel, but I
always feel like I want to put out more videos, do more content, and things like that, and you know,
making art, planning artwork, and doing things like that, trying to become a better artist, plus all of
my personal life as well, is all difficult to manage. So I'm really excited about trying to
build a studio next year. It's in my plans. It's been in my plans for a few years, so we'll see if
it actually happens, but that's something that I'm really looking forward to next year. So we're
starting to puff the piece up a little bit, starting to really get some volume. My brother's
going to take a big heat on it, and now we're going to do what we call putting in the jack line.
So the big pair of tweezers in my hand are called the jacks, and basically I'm putting a small
incision right off the tip of the pipe, where we're going to end up breaking it off of the pipe in the
end. We're going to do another one of those punty transfers, like we said, and that's a little bit
farther down in the process, but earlier we did that punty transfer on the cup, and basically we
just want to do that so that we have the same kind of concept. We flip it over, and we can finish
making the vessel from the other side. So when we're making vessels, there's kind of an idea that
you kind of make half of the piece, so I'm going to focus on just the bottom half of this piece
while it's on the blow pipe, and then we're going to flip it over during the punty transfer,
and afterwards I can start to mess with the top half of the piece. So right now, you'll notice
that I'm really only focusing on the bottom half of the vessel. As the piece gets thinner and thinner,
you can start to really see those lines on there. I probably should have used more color in those
cups, both of the cups that we stretched, but like I mentioned before, that's something that's
kind of a little bit difficult to gauge. So you can really see those colors now, and when the
piece is cooled down, you can really see them in the end. So we go through this process a few times.
I'm going to use my newspaper tool as we start to inflate it. This is about 12 sheets of newspaper
stacked up and soaked in water, and it really helps to cool down the base in certain areas
where I don't really want it to expand. So basically, my brother will blow through the pipe,
and I will use the newspaper tool to stop it from inflating in the areas that I don't want it to
move. And now, you can see I have a small hose attached, so I'm blowing into the pipe through
that hose while I use the newspaper tool, and my brother is pushing in the bottom so we can start
to establish the bottom of the base. So now I'm using the metal tool, the jacks, we're really
trying to make a nice flat plane there. And now that we have our bottom established, my brother's
going to prep for that punty transfer. So he's got a rod, another little piece of glass on the bottom,
he's going to shape that up while it's nice and hot, and then he'll come over and we'll try to
stab it directly onto the bottom of the piece, as kind of in the middle as we can. You know,
vessel making is all about symmetry, so if I mess this move up, there's really no going back.
So we try to put it directly in the middle, I add a few drops of water, I can give the pipe a little
tap, and it should pop right off if everything is right. And there we go, everything went great.
That punty transfer can go wrong in a lot of different ways. If my glass is too thick,
if it's too thin, if I wait too long, if the punty is too cold, it's all about teamwork and
communication. You know, I really can't stress that enough. When you're in the studio, you always have
to talk to your assistant as much as you can. Try to be polite, things get heated sometimes,
you know, but you always got to try to communicate as much as you can. So now we're going to kind of
move this vessel into its final form. I'm going to use my jacks, and we're going to puff it up with
this big soffietta. So this tool is really good as inflating the piece from the inside, so I'm
blowing as hard as I can, and it really rounds out all those edges. And now I'll go ahead and hit
this with my newspaper tool one time to cool down that little plane that we've made, and then I'm
going to move my jacks and open it up to its final form. My brother also has the paddle on the lip
almost the whole time, so that we can ensure that the lip of it is nice and flat. Things like this
can kind of like move in a weird way, so it's always good to have a little paddle there or
something to kind of keep the straight thing straight. And this is basically our final shape,
you know, kind of like a basket vase. I really enjoy making these. You know, I know we had kind
of a shorter video today, but all in all this took us about, you know, two and a half hours to make
after making the cups, pulling the cane, and everything. So the last thing to do is to disconnect
it from the pipe. So we'll add some water onto the disconnection point, tap the pipe a few times,
get rid of any sharp spots with our little torch, and then my brother can transport it into our
annealer with those Kevlar gloves so that it can cool down overnight. We'll be able to come back
in the morning and see what we've got. All right, and here's our final product. I'm pretty happy
with how this came out. I think I obviously could have added more saturation to those cups before
we pulled them, but that's something, like I said, we're still kind of figuring out. So this was a
bunch of fun to throw together. I really hope you guys enjoyed it. And this piece is available for
purchase. You can find a link to it down in the description box below, either at our website or at
our Etsy page. And thanks for hanging out with us today, guys. You know, I'm really sorry I messed
up big time, forgot to turn the mics on. It was a big goof on my part. Had a lot of stuff going on
lately. I don't know if I mentioned, but I'm getting married in about a week. But you guys be
safe out there. We'll catch you in the next one.
